참고문헌
- W. S. Miller, L. Zhuang, J. Bottema, A. J. Wittebrood, P. De Smet, A. Hazler, A. Vieregge, 2000, Recent development in aluminium alloys for the automotive industry, Mater. Sci. Res. Eng., Vol. 280, No. 1, pp. 37-49 https://doi.org/10.1016/S0921-5093(99)00653-X
- Aluminum: The Corrosion Resistant Automotive Material, The Aluminum Association, Inc., 2001, p. 6
- Hayashi H, Nakagawa T, 1994, Recent trends in sheet metals and their formability in manufacturing automotive panels, J. Mater. Proc. Tech., Vol. 46, pp. 455-487 https://doi.org/10.1016/0924-0136(94)90128-7
- Ashley. S, 1997, Steel cars face a weighty decision, Mech. Eng., Vol. 119, pp. 56-61
- H. W. antes, H. Markus, 1970, Mat. Sci. Quart, Vol. 10, p. 9
- S. U. ihara, 1991, Pros. Of Int. Conf. in recent Advances in Science and Engineering of Light Matals, Tokyo, p. 1163
- T. Kashyap, S. Murali, K. S. Raman, K. S. S. Murthy, 1993, Casting and heat treatment variable of Al–7Si–Mg alloy, Mater. Sci. Technol., Vol. 9, No. 3, pp. 189-203 https://doi.org/10.1179/mst.1993.9.3.189
- J. H. Kim, Evgenij Barsoukov, C. O. Yoon, Housll Lee, 1998, 7Li NMR Study of Li Intercalated Carbons Prepared by Electrochemical Method, J. Kor. Foundrymen's Soc., Vol. 18, pp. 297-302
- C. H. Caceres, 1995, On the effect of macroporosity on the tensile properties of the Al-7%Si-0.4%Mg casting alloy, Scripta Metall., Vol. 32, No. 11, pp. 1851-1856 https://doi.org/10.1016/0956-716X(95)00031-P
- C. H. Caceres, B. I. Selling, 1996, Casting defedcts and the tensile properties of an Al-Si-Mg ally, Mater. Sci. Res. Eng., Vol. 22, No. 1-2, pp. 109-116 https://doi.org/10.1016/S0921-5093(96)10433-0
- Q. G. Wang, D. Apelian, D. A. Lados, 2001, Fatigue behavior of 356-T6 aluminum cast alloys. Part I. Effect of casting defects, J. Light. Met., 1, pp. 73-84 https://doi.org/10.1016/S1471-5317(00)00008-0
- H. R. Ammar, A. M. Samuel, F. H. Samuel, 2008, Effect of casting imperfections on the fatigue life of 319-F and 356-T6 Al-Si casting alloys, Mater. Sci. Res. Eng., Vol. 473, No.1-2, pp. 65-75 https://doi.org/10.1016/j.msea.2007.03.112
- ASTM E466, Annual Book of ASTM Standards, 1996, Section 3, Vol. 3, p. 465
- G. Gustafesson, T. Thorvaldesson, G. L. Dumlo, 1986, The influence of Fe and Cr on the microstructure of cast Al-Si-Mg alloys, Metall trans., Vol. 17, pp. 45-52 https://doi.org/10.1007/BF02644441
- P. R. Goulart, J. E. Spinelli, W. R. Osorio, A. Garcai, 2006, Mechanical properties as a function of microstructure and solidification thermal variables of Al–Si castings, Mater. Sci. Eng. Vol. 421, No.1-2, pp. 245-253 https://doi.org/10.1016/j.msea.2006.01.050
- C. H. Caceres, C. J. Davidson, J. R. Griffiths, 1995, The deformation and fracture behaviour of an Al-Si-Mg casting alloy, Mater. Sci. Eng. A, Vol. 197, No. 2, pp. 171-179 https://doi.org/10.1016/0921-5093(94)09775-5
- James A. Wasynczuk, W. Dave Hanna, Franklin D. Ross, Thomas A. Freitag, 1994, High-cycle fatigue of Kovar, Fatigue of Electronic Materials., pp. 110-122
- M. Deters and J.C. Williams, 1984, Metall. Trans. A, Vol. 15A, p. 1588
- K. Gall, N. Yang, M. Horstemeyer, D. L. Mcdowell, J. Fan, 1999, Metal. Mater. Trans., Vol. 30A, No.12, p. 3079
- M. J. Couper, A. E. Neeson, J. R. Griffith, 1990, Casting Defects and the Fatigue Behavior of an Aluminium Casting Alloy, Fatigue Fract. Eng. Mater. Struct., Vol. 13, pp. 213-227 https://doi.org/10.1111/j.1460-2695.1990.tb00594.x
- Y. H. Kim, S. Lee, N. J. Kim, D. Y. Lee, 1991, J. Kor. Inst. Met. & Mater., Vol. 29, p. 112
- B. Zhang, D. R. Poirer, W. Chen, 1999, Microstructural effects on high-cycle fatigue-crack initiation in 356.2 casting alloy, Metal. Mater. Trans. Vol. 30, No. 10, pp. 2659-2666 https://doi.org/10.1007/s11661-999-0306-3
- Sang-Won Han, Sug-Won Kim, 2002, Fatigue Behaviors in Aluminum Cast Alloys, J. Kor. Foundrymen's Soc 22, Vol. 2, pp. 61-68
피인용 문헌
- Corrosion analysis of the duplex aluminum alloys vol.48, pp.5, 2015, https://doi.org/10.5695/JKISE.2015.48.5.227