참고문헌
- Raghavan, A. and Cesnick, C.E.S.(2007), "Review of guided-wave structural health monitoring," The Shock and Vibration, Vol. 32, No. 2, pp. 91-114
- Montalvao, D., Maia, N.M.M., and Rabeiro, A.M.R.(2006),"A review of vibration-based structural health monitoring with special mephasis on composite materials," The Shock and Vibration, Vol. 38, No. 4, pp. 295-324 https://doi.org/10.1177/0583102406065898
- Giurgiutiu, V. and Cuc, A.(2005), "Embedded non-destructive evaluation for structural health monitoring, damage detection, and failure prevention," The Shock and Vibration Digest, Vol.37, No. 2, pp. 83-105 https://doi.org/10.1177/0583102405052561
- Anton, S.R.(2008), "baseline-free and self-poweed structural health monitoring," MS Thesis, Virginia Polytechnic Institute and State University, Virginia, USA
- Viktorov, I.A.(1967), "Rayleigh and Lamb waves - physical theory and applications," Plenum Press, New York
- Prasad, S.M., Balasubramaniam, K., and Krishnamurthy, C.(2004), "Structural health monitoring of composite structures using Lamb wave tomography," Smart Materials and Structures, Vol. 13, No. 5, pp. 873-879 https://doi.org/10.1088/0964-1726/13/4/025
- Tua, P., Quek, S., and Wang, Q.(2005), "Detection of cracks in cylindrical pipes and plates using piezo-actuated Lamb waves, Smart Materials and Structures," Vol. 14, No. 6, pp. 1325-1342 https://doi.org/10.1088/0964-1726/14/6/025
- Park, S., Yun, C.B., Roh, Y., and Lee, J.J.(2006), "PZT-bassed active damage detection techniques for steel bridge components," Smart Materials and Structures, Vol. 13, No. 5, pp. 873-879
- Cuc, A., Gougiutiu, V., Joshi, S., and Tidwell, Z.(2007), "Structural health monitoring with piezoelectric wafer active sensors for space applications," AIAA Journal, Vol. 45, No. 12, pp. 2838-2850 https://doi.org/10.2514/1.26141
- Ihn, J.B. and Chang, F.K.(2008), "Pitch-catch sesing methods in structural health monitoring for aircraft structures," Structural health Monitoring, Vol. 7, No. 1, pp. 5-15 https://doi.org/10.1177/1475921707081979
- Rose, J.L., Ditri, J.J., Pilarski, A., Rajana, K., and Carr, F.T.(1994), "A guided wave inspection technique for nuclear steam generator tuning," NDT&E International, Vol. 27, pp. 307-310 https://doi.org/10.1016/0963-8695(94)90211-9
- Alleyne, D.N., Pavlakovic, B., Lowe, M.J.S. and Cawley, P.(2001), "Rapid, long-range inspectionof chemical plant pipework using guided waves," Review of Progress in QNDE, Vol. 20, pp. 180-187
- Giurgiutiu, V., Zagrai, A., and Bao, J.(2004), "Damage identification in aging aircraft structures with piezoelectric wafer active sensors," Journal of Intelligent Material Systems and Structures, Vol. 15, No. 9-10, pp. 673-687 https://doi.org/10.1177/1045389X04038051
- Fink, M.(1992), "Time reversal of ultrasonic fields - Part I: basic principles," IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control, Vol. 39, No. 5, pp. 555-566 https://doi.org/10.1109/58.156174
- Wang, CH.H., Rose, J.T., and Chang, F.K.(2004), "A synthetic time-reversal imaging method for structural health monitoring," Smart Materials and Structures, Vol. 13, pp. 415-423
- Shon, H., park, H.W., Law, K.H., and Farrar, C.R.(2007), "Damage detection in composite plates by using an enhanced time reversal method," Journal of Aerospace Engineering, Vol. 20, No. 3, pp. 141-151 https://doi.org/10.1061/(ASCE)0893-1321(2007)20:3(141)
- Santani, G.B., Yu, L., Xu, B., and Giurgiutiu, V.(2007),"Lamb wave-mode tuning of piezo-electric wafer active sensors for structural health monitoring, " Journal of Vibratin and Acoustics, Vol. 129, No. 6, pp. 752-762 https://doi.org/10.1115/1.2748469
- Ihn, J.B.(2003), "Built-in diagnostics for monitoring fatigue crack growth in aircraft structures," PhD Thesis, Standard University, CA, USA