DOI QR코드

DOI QR Code

Flexural behavior of reinforced concrete beams strengthened with a hybrid inorganic matrix - steel fiber retrofit system

  • Papakonstantinou, Christos G. (University of Massachusetts Dartmouth, Department of Civil and Environmental Engineering) ;
  • Katakalos, Konstantinos (University of Massachusetts Dartmouth, Department of Civil and Environmental Engineering)
  • 투고 : 2008.06.05
  • 심사 : 2009.03.02
  • 발행 : 2009.03.30

초록

The aim of this study was to investigate the flexural behavior of reinforced concrete beams strengthened with a novel strengthening system. Concrete beams were strengthened with a hybrid retrofit system consisting of high strength steel cords impregnated in an inorganic fireproof matrix (Geopolymer). The strengthened reinforced concrete beams along with non-strengthened control beams were tested monotonically under four point bending loading conditions. Moreover, an analytical model is introduced, that can be used to analyze the flexural performance of the strengthened beams. The experimental results indicate that the failure of the strengthened beams was based on the yielding of the reinforcement in the tension face of the beams, followed by a local slippage of the steel cords. The flexural stiffness of the strengthened beams was significantly improved compared to the stiffness of the non-strengthened beams. In conclusion, the strengthening system can provide an effective alternative to commercially available systems.

키워드

참고문헌

  1. ACI 318-05 (2005), Building Code Requirements for Structural Concrete and Commentary, American Concrete Institute
  2. Arduini, M., Di Tommaso, A. and Nanni, A. (1997), 'Brittle failure in FRP plate and sheet bonded beams', ACI Struct. J., 94(4), 363-370
  3. Balaguru, P. and Kurtz, S. (1998), 'Use of inorganic polymer-fiber composites for repair and rehabilitation of infrastructures', Proceedings of the International Seminar on Repair and Rehabilitation of Reinforced Concrete Structures: The State of the Art, Maracaibo, Venezuela, 155-168
  4. Balaguru, P.N. (2003), 'High strength composites for infrastructure: Current and future directions of research', International Society of Offshore and Polar Engineers, Honolulu, HI, United States, 2251-2259
  5. Barton, B., Wobbe, E., Dharani, L.R., Silva, P., Birman, V., Nanni, A., Alkhrdaji, T., Thomas, J. and Tunis, G. (2005), 'Characterization of reinforced concrete beams strengthened by steel reinforced polymer and grout (SRP and SRG) composites', Mater. Sci. Eng. A, 412(1-2), 129-136 https://doi.org/10.1016/j.msea.2005.08.151
  6. Bonacci, J.F. and Maalej, M. (2001), 'Behavioral trends of RC beams strengthened with externally bonded FRP', J. Compos. Constr., 5(2), 102-103 https://doi.org/10.1061/(ASCE)1090-0268(2001)5:2(102)
  7. Casadei, P., Nanni, A. and Alkhrdaji, T. (2005a), 'Steel-reinforced polymer: An innovative and promising material for strengthening infrastructures', Concr. Eng. Int., 9(1), 54-56
  8. Casadei, P., Nanni, A., Alkhrdaji, T. and Thomas, J. (2005b), 'Performance of double-T prestressed concrete beams strengthened with steel reinforcement polymer', Adv. Struct. Eng., 8(4), 427-441 https://doi.org/10.1260/136943305774353124
  9. Ceroni, F. and Pecce, M. (2007), 'Cracking behaviour of RC beams externally strengthened with emerging materials', Constr. Build. Mater., 21(4), 736-745 https://doi.org/10.1016/j.conbuildmat.2006.06.013
  10. Foden, A.J., Balaguru, P., Lyon, R.E. and Davidovits, J. (1997), 'Flexural fatigue properties of an inorganic matrix-carbon fiber composite', International SAMPE Symposium and Exhibition (Proceedings), Anaheim, CA, USA, 1345-1354
  11. Garon, R., Balaguru, P.N., Cao, Y. and Lee, K.-W.W. (2000), 'Use of fiber reinforced composites to improve the durability of bridge elements', Proc. SPIE, Int. Society Opt. Eng., 3988, 440-449 https://doi.org/10.1117/12.383165
  12. Giancaspro, J., Balaguru, P. and Lyon, R. (2001), 'Hybrid composites with glass/carbon fibers and inorganic/ organic matrices', International SAMPE Symposium and Exhibition (Proceedings), Long Beach, CA, USA, 2582-2592
  13. Giancaspro, J., Balaguru, P. and Lyon, R. (2004), 'Fire protection of flammable materials utilizing geopolymer', SAMPE J., 40(5), 42-49
  14. Giancaspro, J., Lyon, R. and Balaguru, P. (2002), 'Flexural behavior of balsa wood cores reinforced with inorganic carbon composite', International SAMPE Symposium and Exhibition (Proceedings), Long Beach, CA, United States, 530 -541
  15. Grace, N.F. and Abdel-Sayed, G. (1996), 'Double tee and CFRP/GFRP bridge system', Concr. Int., 18(2), 39-44
  16. Hammell, J., Balaguru, P. and Lyon, R. (1998), 'Influence of reinforcement types on the flexural properties of geopolymer composites', International SAMPE Symposium and Exhibition (Proceedings), Anaheim, CA, USA, 1600-1608
  17. Harrison, R.R., Rasheed, H.A., Peterman, R.J. and Alkhrdaji, T.(2006), 'Comparison of four techniques for strengthening concrete beams using performance and practicality criteria', St. Louis, MO, United States, 70
  18. Hognestad, E. (1951), 'A study of combined bending and axial load in reinforced concrete members', Univ. of Illinois, USA
  19. Huang, X., Birman, V., Nanni, A. and Tunis, G. (2005),''Properties and potential for application of steel reinforced polymer and steel reinforced grout composites', Compos. Part B: Eng., 36(1), 73-82 https://doi.org/10.1016/S1359-8368(03)00080-5
  20. Karayannis, C.G. and Chalioris, C.E. (2003), 'Experimental investigation of the contribution of bonded C-FRP jackets to shear capacity of RC beams', Dundee, United Kingdom, 689-696
  21. Kim, Y.J., Fam, A., Kong, A. and El-Hacha, R. (2005), 'Flexural strengthening of RC beams using steel reinforced polymer (SRP) composites', 7th International Symposium on Fiber-Reinforced (FRP) Polymer Reinforcement for Concrete Structures
  22. Kurtz, S. and Balaguru, P. (2001), 'Comparison of inorganic and organic matrices for strengthening of RC beams with carbon sheets', J. Struct. Eng., 127(1), 35-42 https://doi.org/10.1061/(ASCE)0733-9445(2001)127:1(35)
  23. Lopez, A., Galati, N., Alkhrdaji, T. and Nanni, A. (2007), 'Strengthening of a reinforced concrete bridge with externally bonded steel reinforced polymer (SRP)', Compos. Part B: Eng., 38(4), 429-436 https://doi.org/10.1016/j.compositesb.2006.09.003
  24. Lyon, R.E., Balaguru, P.N., Foden, A., Sorathia, U., Davidovits, J. and Davidovics, M. (1997), 'Fire-resistant aluminosilicate composites', Fire Mater., 21(2), 67-73 https://doi.org/10.1002/(SICI)1099-1018(199703)21:2<67::AID-FAM596>3.0.CO;2-N
  25. Masmoudi, R., Theriault, M. and Benmokrane, B. (1998), 'Flexural behavior of concrete beams reinforced with deformed fiber reinforced plastic reinforcing rods', ACI Struct. J., 95(6), 665-675
  26. Mirmiran, A., Shahawy, M. and Samaan, M. (1999), 'Strength and ductility of hybrid FRP-concrete beamcolumns', J. Struct. Eng., 125(10), 1085-1093 https://doi.org/10.1061/(ASCE)0733-9445(1999)125:10(1085)
  27. Nanni, A. (1993), 'Flexural behavior and design of RC members using FRP reinforcement', J. Struct. Eng., 119(11), 3344-3359 https://doi.org/10.1061/(ASCE)0733-9445(1993)119:11(3344)
  28. Nanni, A. (1997), "CFRP strengthening", Concr. Int., 19(6), 19-23
  29. Nanni, A. and Gold, W. (1998), 'Strengthening of RC flexural members with FRP composites', Maracaibo, Venezuela, 144-154
  30. Papakonstantinou, C.G., Balaguru, P. and Lyon, R.E. (2001a), 'Comparative study of high temperature composites', Compos. Part B: Eng., 32(8), 637-649 https://doi.org/10.1016/S1359-8368(01)00042-7
  31. Papakonstantinou, C.G. and Balaguru, P.N. (2006), 'Fire testing of geopolymer based syntactic foams', International SAMPE Symposium and Exhibition (Proceedings), Long Beach, CA, United States, 9
  32. Papakonstantinou, C.G. and Balaguru, P.N. (2007a), 'Fatigue behavior of high temperature inorganic matrix composites', J. Mater. Civil Eng., 19(4), 321-328 https://doi.org/10.1061/(ASCE)0899-1561(2007)19:4(321)
  33. Papakonstantinou, C.G. and Balaguru, P.N. (2007b), 'Geopolymer protective coatings for concrete', International SAMPE Symposium and Exhibition, Baltimore, MD, United States, 13

피인용 문헌

  1. Innovative solution to retrofit RC members: Inhibiting-Repairing-Strengthening (IRS) vol.117, 2016, https://doi.org/10.1016/j.conbuildmat.2016.05.053
  2. Experimental investigation of substandard RC columns confined with SRG jackets under compression vol.184, 2018, https://doi.org/10.1016/j.compstruct.2017.09.082
  3. An Innovative Solution for the Structural Consolidation of RC Modern Cultural Heritage vol.11, pp.6, 2017, https://doi.org/10.1080/15583058.2017.1300711
  4. Eco-friendly external strengthening system for existing reinforced concrete beams vol.93, 2016, https://doi.org/10.1016/j.compositesb.2016.03.022
  5. Investigation of the Force Transfer Mechanisms for Open Hoop FRP Strips Bonded on R/C Beams with or without Anchoring Devices vol.03, pp.03, 2013, https://doi.org/10.4236/ojce.2013.33017
  6. Geopolymer matrix for fibre reinforced composites aimed at strengthening masonry structures vol.141, 2017, https://doi.org/10.1016/j.conbuildmat.2017.03.017
  7. Single-lap shear bond tests on Steel Reinforced Geopolymeric Matrix-concrete joints vol.110, 2017, https://doi.org/10.1016/j.compositesb.2016.11.005
  8. Can Existing Design Codes Be Used to Design Flexural Reinforced Concrete Elements Strengthened with Externally Bonded Novel Materials? vol.371, pp.1757-899X, 2018, https://doi.org/10.1088/1757-899X/371/1/012031
  9. Concurrent flexural strength and deformability design of high-performance concrete beams vol.40, pp.4, 2009, https://doi.org/10.12989/sem.2011.40.4.541
  10. Prediction of deflection of high strength steel fiber reinforced concrete beams and columns vol.9, pp.2, 2009, https://doi.org/10.12989/cac.2012.9.2.133
  11. Seismic Retrofit of R/C T-Beams with Steel Fiber Polymers under Cyclic Loading Conditions vol.9, pp.4, 2019, https://doi.org/10.3390/buildings9040101
  12. Reinforced Concrete Beams Retrofitted with External CFRP Strips towards Enhancing the Shear Capacity vol.11, pp.17, 2009, https://doi.org/10.3390/app11177952