DOI QR코드

DOI QR Code

Behavior of high-strength fiber reinforced concrete plates under in-plane and transverse loads

  • Ramadoss, P. (Department of Civil Engineering, Pondicheery Engineering College) ;
  • Nagamani, K. (Structural Engineering Division, Civil Engineering Department, Anna University)
  • 투고 : 2007.05.07
  • 심사 : 2009.02.01
  • 발행 : 2009.03.10

초록

The concrete plates are most widely used structural elements in the hulls of floating concrete structures such as concrete barges and pontoons, bridge decks, basement floors and liquid storage tanks. The study on the behavior of high-strength fiber reinforced concrete (HSFRC) plates was carried out to evaluate the performance of plates under in-plane and transverse loads. The plates were tested in simply supported along all the four edges and subjected to in-plane and traverse loads. In this experimental program, twenty four 150 mm diameter cylinders and twelve plate elements of size $600{\times}600{\times}30$ mm were prepared and tested. Water-to-cementitious materials ratios of 0.3 and 0.4 with 10% and 15% silica fume replacements were used in the concrete mixes. The fiber volume fractions, $V_f$ = 0%, 1% and 1.5% with an aspect ratio of 80 were used in this study. The HSFRC mixes had the concrete compressive strengths in the range of 52.5 to 70 MPa, flexural strengths ranging from 6.21 to 11.08 MPa and static modulus of elasticity ranging from 29.68 to 36.79 GPa. In this study, the behavior of HSFRC plate elements subjected to combined uniaxial in-plane and transverse loads was investigated.

키워드

참고문헌

  1. ACI Committee 211 (1999), Guide for Selecting Proportions for High Strength Concrete with Portland Cement and Fly Ash, ACI 211.4R-93, ACI Manual of Concrete Practice
  2. ACI Committee 363 (1997), State-of-the-art Report on High-strength Reinforced Concrete, ACI 363-92, American Concrete Institute, Detroit
  3. ACI Committee 544 (2006), Guide for Specifying, Mixing, Placing and Finishing Steel Fiber Reinforced Concrete, ACI 544.3R-95, American Concrete Institute, Detroit
  4. ACI Committee 544-1989, Design Considerations for Steel Fiber Reinforced Concrete, ACI 544.4R-89, American Concrete Institute, Detroit
  5. Aghayere, A.O. and MacGregor, J.G. (1990a), "Test of reinforced concrete plates under in-plane and traverse loads" ACI Struct. J., 87(6), 615-622
  6. Aghayere, A.O. and MacGregor, J.G. (1990b), "Analysis of concrete plates under combined in-plane and tranverse loads", ACI Struct. J., 87(5), 539-547
  7. Balaguru, N. and Shah, S.P. (1992), Fiber Reinforced Concrete Composites, McGraw Hill International edition, New York
  8. Bambach, M.R. and Rasmussen, K.J.R. (2004) "Test of unstiffened plate elements under combined compression and bending", J. Struct. Eng., 130(10), 1602-1610 https://doi.org/10.1061/(ASCE)0733-9445(2004)130:10(1602)
  9. Bao, G., Jiang, W. and Roberts, J.C. (1997), "Analytical and finite element solutions for bending and buckling of orthotropic plates", Int. J. Solids Struct., 34(14), 1797-1832 https://doi.org/10.1016/S0020-7683(96)00114-X
  10. Ghoneim, M.G. and MacGregor, J.G. (1994a), "Tests of reinforced concrete plates under combined inplane andlateral loads", ACI Struct. J., 91(1), 19-30
  11. Ghoneim, M.G. and MacGregor, J.G. (1994b), "Behavior of reinforced concrete plates under combined inplane and lateral loads", ACI Struct. J., 91(2), 188-197
  12. Malekzadeh, P. (2007), "A DQ nonlinear bending analysis of skew composite thin plates", Struct. Eng. Mech.25(2), 161-180 https://doi.org/10.12989/sem.2007.25.2.161
  13. Noh, H.C. and Choi, C.K. (2005), "Added effect of uncertain geometrical parameter on the response of variability of Mindlin plate", Struct. Eng. Mech., 20(4), 477-493 https://doi.org/10.12989/sem.2005.20.4.477
  14. Park, H. and Kim, E.H. (1999), "R.C. flat plates under combined in-plane and out-of plane loads", J. Struct.Eng., ASCE, 125(10), 1138-1142 https://doi.org/10.1061/(ASCE)0733-9445(1999)125:10(1136)
  15. Ramadoss, P. and Nagamani, K. (2006), "Investigations on the tensile strength of high-performance fiber reinforced concrete using statistical methods", Comput. Concrete., 3(6), 389-400 https://doi.org/10.12989/cac.2006.3.6.389
  16. Ramadoss, P. and Nagamani, K. (2007), "Behavior of high-performance fiber reinforced concrete plates", Proceedings of International Conference on Recent Developments in Structural Engineering, RDSE-2007,MIT, Manipal, India,Aug./Sept
  17. Roberts-Willmann, C.L., Guirola, M. and Easterling, W.S. (2004), "Stength and performance of fiber-reinforced concrete composites slabs", J. Struct. Eng., 130(3), 520-528 https://doi.org/10.1061/(ASCE)0733-9445(2004)130:3(520)
  18. Swartz, S.E., Roseebraugh, V.H. and Berman, M.Y. (1973), "Buckling tests on rectangular concrete panels", ACIJ., 33-39

피인용 문헌

  1. Analysis and prediction of ultimate strength of high-strength SFRC plates under in-plane and transverse loads vol.52, pp.6, 2014, https://doi.org/10.12989/sem.2014.52.6.1273
  2. Normalised rotation capacity for deformability evaluation of high-performance concrete beams vol.1, pp.3, 2009, https://doi.org/10.12989/eas.2010.1.3.269
  3. Biomimetics of the extracellular matrix: an integrated three-dimensional fiber-hydrogel composite for cartilage tissue engineering vol.7, pp.3, 2009, https://doi.org/10.12989/sss.2011.7.3.213
  4. Analytical solutions for skewed thick plates subjected to transverse loading vol.38, pp.5, 2009, https://doi.org/10.12989/sem.2011.38.5.549
  5. A note on buckling and vibration of clamped orthotropic plates under in-plane loads vol.39, pp.1, 2011, https://doi.org/10.12989/sem.2011.39.1.115
  6. Concurrent flexural strength and deformability design of high-performance concrete beams vol.40, pp.4, 2009, https://doi.org/10.12989/sem.2011.40.4.541
  7. Prediction of deflection of high strength steel fiber reinforced concrete beams and columns vol.9, pp.2, 2009, https://doi.org/10.12989/cac.2012.9.2.133
  8. Modeling of fiber pullout behaviors of stiff fiber reinforced cementitious composites vol.9, pp.3, 2009, https://doi.org/10.12989/cac.2012.9.3.171