한국생산제조학회지 (Journal of the Korean Society of Manufacturing Technology Engineers)

  • 제18권3호
  • /
  • Pages.261-269
  • /
  • 2009
  • /
  • 2508-5093(pISSN)
  • /
  • 2508-5107(eISSN)
한국생산제조학회 (The Korean Society of Manufacturing Technology Engineers)
권호 표지

마이크로 엔드밀링 공정의 절삭계수 모델링 및 최적 공정설계

Modeling of Cutting Parameters and Optimal Process Design in Micro End-milling Processes

  • 발행 : 2009.06.15
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Micro end-milling process is applied to fabricate precision mechanical parts cost-effectively. It is a complex and time-consuming job to select optimal process conditions with high productivity and quality. To improve the productivity and quality of precision mechanical parts, micro end-mill wear and cutting force characteristics should be studied carefully. In this paper, high speed machining experiments are studied to construct the optimum process design as well as the mathematical modeling of tool wear and cutting force related to cutting parameters in micro ball end-milling processes. Cutting force and wear characteristics under various cutting conditions are investigated through the condition monitoring system and the design of experiment. In order to construct the cutting database, mathematical models for the flank wear and cutting force gradient are derived from the response surface method. Optimal milling conditions are extracted from the developed experimental models.

키워드

참고문헌

  1. Xie, L., Brownridge, S. D., and Ozdoganlar, O. B., 2006, "The Viability of Micromilling for Manufacturing Mechanical Attachment Components for Medical Applications," Trans. of NAMRl/SME, Vol. 34, pp. 445-452.
  2. Uhlmann, E. and Schauer, K., 2005, "Dynamic Load and Strain Analysis for the Optimization of Micro End Mills," CIRP Annal-Manufacturing Technology, Vol. 54, No 1, pp. 75-78.
  3. Bissacco, G., Hansen, H. N., and De Chiffre, L., 2005, "Micromilling of Hardened Tool Steel for Mould Making Applications," Journal of Materials Processing Technology, Vol. 167, pp. 201-207.
  4. Masahiro, A, Ichiro, T., and Toshitaka, M., 1996, "Ultra High Speed Milling and Cutting Tools," Int. J. Japan Soc. Prec. Eng., Vol. 30, No.4, pp. 299-303.
  5. Yang, J. S., Heo, Y. M., and Jung, T. S., 2006, "An Experimental Study on Tool Wear of Small Diameter Endmill for High Speed Milling of Hardened Mold Steel," Trans. of Materials Processing, Vol. 15, No. 1, pp. 57-64.
  6. Dolinsek, S., Sustarsic, B., and Kopac, J., 2001, "Wear Mechanisms of Cutting Tools in High-Speed Cutting Processes," Wear, 250, pp. 349-356.
  7. Choi, J. G., Kang, Y. K., and Lee, J. J., 2003, "A Study on the Flexible Cutting Force Model in the Ball End Milling Process," Trans. of KSMTE, Vol. 12, No.2, pp. 44-52.
  8. Vogler, M. P., Kapoor, S. G., and DeVor, R. E., 2004, "On the Modeling and Analysis of Machining Performance in Micro-Endmilling, Part II: Cutting Force Prediction," Trans. of the ASME, Vol. 126, pp. 695-705.
  9. Sim, K. J. and Mun, S. D., 2006, "Analysis of Chip Thickness Model in Ball-end Milling," Trans. of KSMTE, Vol. 15, No.2, pp. 73-80.
  10. Kim, S. C and Chung, S. C, 1998, "Cutting Force Estimation Using Spindle and Feed drive Motor Currents in Milling Processes," Trans. of KSME(A), Vol. 22, No. 11, pp. 2029-2038.
  11. Tlustry, J. and Andrews, G. C, 1983, "A Critical Review of Sensors for Unmanned Machining," CIRP Annals, Vol. 32, No.2, pp. 563-572.
  12. Yoon, H. S. and Chung, S. C, 2004, "Vision Inspection of Micro-drilling Processes on the Machine Tool," Trans. of KSME(A), Vol. 28, No.6, pp. 867-875.
  13. Park, C W. and Chung, S. C, 2006, "3D Wear Analysis of Valve Assemblies by Using the Machine Vision," Trans. of KSME(A), Vol. 30, No.5, pp. 496-504.
  14. Choi, Y. J. and Chung, S. C, 2006, "Monitoring of Micro-Drill Wear by Using the Machine Vision System," Trans. of KSME(A), Vol. 30, No.6, pp. 713-721
  15. Gonzalez, R. C and Woods, R. E., 2002, Digital Image Processing, Prentice Hall Inc., New Jersey.
  16. Park, S. H., 2005, Modern Design of Experiments, Minyongsa, Republic of Korea.
  17. Yoon, K. W. and Chung, S. C, 2008, "Drilling Characteristics and modeling of diamond core drilling processes," Trans. of KSMTE, Vol. 17, No.4, pp. 95-103.
  18. Altintas, 2000, Manufacturing Automation, Cambridge University Press, Cambridge.