한국전기전자재료학회논문지 (Journal of the Korean Institute of Electrical and Electronic Material Engineers)

  • 제22권10호
  • /
  • Pages.890-896
  • /
  • 2009
  • /
  • 1226-7945(pISSN)
  • /
  • 2288-3258(eISSN)
한국전기전자재료학회 (The Korean Institute of Electrical and Electronic Material Engineers)
권호 표지
DOI QR코드

DOI QR Code

Li[Ni0.3Co0.4Mn0.3]O2 양극물질의 Li-La-Ti-O코팅 효과

The Effects of Li-La-Ti-O Coating on the Properties of Li[Ni0.3Co0.4Mn0.3]O2 Cathode Material

  • 이혜진 (경기대학교 첨단산업공학부 신소재공학) ;
  • 윤수현 (경기대학교 첨단산업공학부 신소재공학) ;
  • 박보건 (경기대학교 첨단산업공학부 신소재공학) ;
  • 유제혁 (경기대학교 첨단산업공학부 신소재공학) ;
  • 김관수 (경기대학교 첨단산업공학부 신소재공학) ;
  • 김석범 (경기대학교 첨단산업공학부 신소재공학) ;
  • 박용준 (경기대학교 첨단산업공학부 신소재공학)
  • 투고 : 2009.07.15
  • 심사 : 2009.09.17
  • 발행 : 2009.10.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Li(Ni, Co, Mn)$O_2$ has been known as one of the most promising cathode materials for lithium secondary batteries. However, it has some problems to overcome for commercialization such as inferior rate capability and unstable thermal stability. In order to address these problems, surface modification of cathode materials by coating has been investigated. In the coating techniques, selection of coating material is a key factor of obtaining enhanced properties of cathode materials. In this work, we introduced solid electrolyte (Li-La-Ti-O) as a coating material on the surface of $Li[Ni_{0.3}Co_{0.4}Mn_{0.3}]O_2$ cathode. Specially, we focused on a rate performance of Li-La-Ti-O coated $Li[Ni_{0.3}Co_{0.4}Mn_{0.3}]O_2$ cathode. Both bare and Li-La-Ti-O 2 wt.% coated sample showed similar discharge capacity at 0.5C rate. However, as the increase of charge-discharge rate to 3C, the coated samples displayed better discharge capacity and cyclic performance than those of bare sample.

키워드

참고문헌

  1. B. L. Cushing and J. B. Goodenough, "Influence of carbon coating on the performance of a $LiMn_{0.5}Ni_{0.5}O_{2}$ cathode", Solid State Sciences, Vol. 4, p. 1487, 2002. https://doi.org/10.1016/S1293-2558(02)00044-4
  2. J. T. Son, K. S. Park, H. G. Kim, and H. T. Chung, "Surface-modification of $LiMn_{2}O_{4}$ with a silver-metal coating", J. Power Sources, Vol. 126, p. 182, 2004. https://doi.org/10.1016/j.jpowsour.2003.07.010
  3. Y. J. Park, "High rate performance of $Li[Co_{0.5}Li_{0.17}Mn_{0.33}]O_{2}$ cathode", J. of KIEEME (in Korean), Vol. 19, No. 8, p. 737, 2006. https://doi.org/10.4313/JKEM.2006.19.8.737
  4. C. Li, H. P. Zhang, L. J. Fu, H. Liu, Y. P. Wu, E. Rahm, R. Holze, and H. Q. Wu, “Cathode materials modified by surface coating for lithium ion batteries”, Electrochimica Acta, Vol. 51, p. 3872, 2006. https://doi.org/10.1016/j.electacta.2005.11.015
  5. H. B. Kim, B. C. Park, S. T. Myung, K. Amine, J. Prakash, and Y. K. Sun, "Electrochemical and thermal characterization of $AlF_{3}$-coated $Li[Ni_{0.8}Co_{0.15}Al_{0.55}]O_{2}$ cathode in lithium-ion cells", J. Power Sources, Vol. 179, p. 347, 2008. https://doi.org/10.1016/j.jpowsour.2007.12.109
  6. S. H. Lee, B. K. Koo, J. C. Kim, and K. M. Kim, "Effect of $Co_{3}(PO_{4})_{2}$ coating on $Li[Co_{0.1}Ni_{0.15}Li_{0.2}Mn_{0.55}]O_{2}$ cathode material for lithium rechargeable batteries", J. Power Sources, Vol. 184, p. 276, 2008. https://doi.org/10.1016/j.jpowsour.2008.05.091
  7. T. Tsurui, T. Katsumata, and Y. Inaguma, "Microstructural analysis of $La_{2/3-x}Li_{2/3-x}Li_{3x}TiO_{3}$ single crystals and quenched samples observed by high resolution transmission electron microscopy", Solid State Ionics, Vol. 180, p. 607, 2008. https://doi.org/10.1016/j.ssi.2008.10.023
  8. J. Li, Z. Wen, X. Xu, and J. Zhang, "Synthesis and characterization of Li ion conducting $La_{2/3x}Li_{3x}TiO_{3}$ by a polymerizable complex method", Ceramics International, Vol. 33, p. 1591, 2007. https://doi.org/10.1016/j.ceramint.2006.06.008
  9. Y. J. Park, "Stability of $Li[Co_{0.1}Ni_{0.15}Li_{0.2}Mn_{0.55}]O_{2}$ cathode material for lithium secondary battery", J. of KIEEME(in Korean), Vol. 20, No. 5, p. 443, 2007. https://doi.org/10.4313/JKEM.2007.20.5.443
  10. H. T. Chung and D. S. Cheong, “The microscopoc features of $(Li_{0.5}La_{0.5})TiO_{3}$”, Solid State Ionics, Vol. 120, p. 199, 1999.
  11. G. T. K. Feya, C. Z. Lua, T. P. Kumara, and Y. C. Changb, “$TiO_{2}$ coating for long-cycling $LiCoO_{2}$: A comparison of coating procedures”, Surface & Coatings Technology, Vol. 199, p. 22, 2005. https://doi.org/10.1016/j.surfcoat.2005.03.021
  12. A. D. Robertson and P. G. Bruce, “Mechanism of electrochemical activity in $Li_{2}MnO_{3}$”, Chem. Mater., Vol. 15, p. 1984, 2003. https://doi.org/10.1021/cm030047u
  13. S. T. Myung, K. Izumi, S. Komaba, H. Yashiro, H. J. Bang, Y. K. Sun, and Naoaki Kumagai, "Funtionality of oxide coating for $Li[Co_{0.05}Ni_{0.4}Co_{0.15}Mn_{0.4}]O_{2}$" as positive electrode materials for litium-ion secondary batteries", J. Phys. Chem., Vol. 111, p. 4061, 2007.
  14. J. H. Ryu, S. B. Kim, and Y. J. Park, "Ag doping effect on $Li[Ni_{0.2}Li_{0.2}Mn_{0.6}]O_{2}$ cathode material", J. of KIEEME(in Korean), Vol. 21, No. 3, p. 249, 2008. https://doi.org/10.4313/JKEM.2008.21.3.249
  15. J. Choi and A. Manthiram, "Role of chemical and structural stabilties on the electrochemical properties of layered $LiNi_{1/3}Mn_{1/3}Co_{1/3}O_{2}$ cathodes", J. Electrochemical Society, Vol. 152, p. A1714, 2005. https://doi.org/10.1149/1.1954927