Journal of Advanced Marine Engineering and Technology

  • 제33권4호
  • /
  • Pages.533-538
  • /
  • 2009
  • /
  • 2234-7925(pISSN)
  • /
  • 2234-8352(eISSN)
한국마린엔지니어링학회 (The Korean Society of Marine Engineering)
권호 표지
DOI QR코드

DOI QR Code

균열선단 변위측정위치에 따른 STS 316L의 구속효과 A2 거동

Experimental Behaviors of the Constraint Effects A2 Depending on Displacement at Various Measuring Positions near Crack Front for STS 316L CT Specimen

  • 한민수 (목포해양대학교 기관시스템공학부) ;
  • 장석기 (목포해양대학교 기관시스템공학부)
  • 발행 : 2009.05.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The magnitude of constraint effect $A_2$ values on the non-linear elastic plastic fracture toughness was experimentally estimated by using displacement at various measuring positions near crack tip. Constraint effect $A_2$ value was dependent on specimen configuration and on the measured displacement near crack front. The crack tip opening displacement in the vicinity of the crack tip front should be estimated within plastic region when appropriately constraint effect was calculated. It was found that the magnitude of constrain effect |$A_2$| is below 8.0 at the crack tip. But an appropriate location to measure the effective constraint effects $A_2$ at the critical value of J that crack initiation is characterizable by is r = 2mm and ${\theta}=90^{\circ}$ away from original crack tip, and the constraint effect |$A_2$| estimated is 5.3.

키워드

참고문헌

  1. Zhonghua Li and K. H. Schwalbe, "Engineering treatment model for creep crack driving force estimation: CTOD in terms of $\delta_5$>", Engineering Fracture Mechanics, Vol. 68, pp. 221-233, 2001 https://doi.org/10.1016/S0013-7944(00)00065-5
  2. 한민수, 장석기, 이돈출, 김성종, 박종식, "균열선단 개구변위를 이용한 파괴인성평가와 구속효과와의 관계", 2006년도 한국마린엔지니어링학회 전기학술대회, pp. 91-92, 2006
  3. 한민수, 장석기, '실험적 변위측정위치에 따른 구속효과 A2의 거동', 대한금속･재료학회지, 제 46권, 제 6호, pp. 345-350, 2008
  4. S. Yang, Y. J. Chao and M. A. Sutton, "Higher order asymptotic crack tip fields in a power-low hardernig material", Engineering Fracture Mechanics, Vol. 45, No. 1, pp. 1-20, 1993 https://doi.org/10.1016/0013-7944(93)90002-A
  5. Y. L. Chao, S. Yang and M. A. Sutton, "On the fracture of solids characterized by one or two parameters : Theory and practice", J. Mech. Phys. Solids, Vol. 42, No. 4, pp. 629-647, 1994 https://doi.org/10.1016/0022-5096(94)90055-8
  6. Y. J. Chao and P. S. Lam., "On the use of constraint parameter $A_2$ determined from displacement in predicting fracture event", Engineering Fracture Mechanics, Vol. 61, pp. 487-502, 1998 https://doi.org/10.1016/S0013-7944(98)00078-2
  7. G. P. Nikishkov, J. Heerens, K. H. Schwalbe, "Transformation of CTOD $\delta_5$ to CTOD $\delta_{BS}$ and J-integral for 3PBand CT-specimens", Engineering Fracture Mechanics, Vol. 63, pp. 573-589, 1999 https://doi.org/10.1016/S0013-7944(99)00039-9
  8. J. R. Rice, "A path independent integral and the approximate analysis of strain concentration by notches and cracks", Journal of Applied Mechanics, Vol. 1, pp. 379-386, 1968
  9. Y. J. Chao and L. Zhang, 'Table of plane strain crack tip filds : HRR and high order terms', ME-report 97-1, University of South Carolina, 1996
  10. 한민수, 장석기, 김성종, 고재용, 오영철, "균열선단 개구변위와 유한요소해석을 이용한 구속효과 평가", 2007년도 한국마린엔지니어링학회, 전기학술대회, pp. 359 -360, 2007