References
- Mobley, R.K., 2002, An Introduction to Predictive Maintenance, New York, Elsevier Science.
- Wireman, T., 1990, World Class Maintenance Management, New York, Industrial Press.
- Chan, F.T.S, Lau, H.C.W., Ip, R.W.L., Chan, H.K., and Kong, S., 2005, “Implementation of total productive maintenance: Acase study,” International Journal of Production Economics, Vol. 95, pp. 71-94. https://doi.org/10.1016/j.ijpe.2003.10.021
- Campbell, J.D., 1995, Uptime: Strategies for Excellence in Maintenance Management, Productivity Press, USA.
- Waeyenbergh, G., and Pintelon, L., 2002, “A framework for maintenance concept development,” International Journal ofProduction Economics, Vol. 77, pp. 299-313. https://doi.org/10.1016/S0925-5273(01)00156-6
- Tsang, A.H.C., 1995, “Condition-based maintenance: tools and decision making,” Journal of Quality in MaintenanceEngineering, Vol. 1, pp. 3-17.
- Venkatasubrsmanian, V., 1944, “Towards integrated process supervision: current status and future directions,” Proceedings ofthe IFAC International Conference on Computer Software Structures, Sweden, pp. 1-13.
- Chen, J. and Patton, R.J., 1999, Robust Model-based Fault Diagnosis for Dynamic Systems, Boston, Kluwer.
- Frank, P.M., 1990, “Fault diagnosis in dynamic systems using analytical and knowledge-based redundancy,” Automatica, Vol.26, pp. 459-474. https://doi.org/10.1016/0005-1098(90)90018-D
- Gertler, J., 1998, Fault Detection and Diagnosis in Engineering Systems, New York, Marcel Dekker.
- Himmelblau, D.M., 1978, Fault-Detection and Diagnosis in Chemical and Petrochemical Processes, Amsterdam, Elsevier.
- Isermann, R., 1984, “Process fault detection based on modeling and estimation methods – a survey,” Automatica, Vol. 20, pp.387-404. https://doi.org/10.1016/0005-1098(84)90098-0
- Isermann, R., 1997, “Supervision, fault detection and fault diagnosis methods – an introduction,” Control EngineeringPractice, Vol. 5, pp. 639-652. https://doi.org/10.1016/S0967-0661(97)00046-4
- Patton, R.J., Frank, P.M., and Clark (Eds.), P.N., 2000, Issues of Fault Diagnosis for Dynamic Systems, Berlin, Springer.
- Gertler, J.J., 1988, “Survey of model-based failure detection and isolation in complex plants,” IEEE Control SystemsMagazine, Vol. 8, No. 6, pp. 3-11. https://doi.org/10.1109/37.9163
- Preparata, F.P., Metze, G., and Chien, R.T., 1967, “On the connection assignment problem of diagnosable systems,” IEEETrans. Electronic Computers, Vol. EC-16, No. 6, pp. 848-854. https://doi.org/10.1109/PGEC.1967.264748
- Umeda, T., Kuriyama, T., OShima, E., and Matsuyama, H., 1980, “A graphical approach to cause and effect analysis ofchemical processing systems,” Chemical Engineering Science, Vol.35, No.12, pp. 2379-2388. https://doi.org/10.1016/0009-2509(80)85051-2
- Becker, L.A. and Kinigadner, A., 1989, “Manufacturing process representations for distributed diagnosis of execution errors,Expert systems: strategies and solutions in manufacturing design and planning,” Manufacture Engineering, pp. 347-367
- Davis, R., 1984, “Diagnostic reasoning based on structure and behavior,” Artificial Intelligence, Vol. 24, pp. 347-410. https://doi.org/10.1016/0004-3702(84)90042-0
- Holloway, L.E. and Krogh, B.H., 1990, “Fault detection and diagnosis in manufacturing systems: a behavioral modelapproach,” Proceedings of Rensselaer’s 2nd International Conference on Computer Integrated Manufacturing, New York, pp. 252-259.
- Paul, C.J., Holloway, L.E., Yan, D., Strosnider, J.K., and Krogh, B.H., 1992, “An intelligent reactive monitoring andscheduling system,” IEEE Control Systems Magazine, Vol. 12, No. 3, pp. 78-86. https://doi.org/10.1109/37.165523
- Howard, I., Jia, S., and Wang, J., 2001, “The dynamic modeling of a spur gear in mesh including friction and a crack,”Mechanical Systems and Signal Processing, Vol. 15, pp. 831-838. https://doi.org/10.1006/mssp.2001.1414
- Wang, W.Y., 2002, “Towards dynamic model-based prognostics for transmission gears,” Component and SystemsDiagnostics, Prognostics, and Health Management II, Vol. 4733, Bellingham, pp. 157-167.
- Baillie, D.C. and Mathew, J., 1994, “Nonlinear model-based fault diagnosis of bearings,” Proceedings of InternationalConference on Condition Monitoring, Swansea, UK, pp. 241-252.
- K.A. Loparo, M.L. Adams, W. Lin, M.F. Abdel-Magied, N. Afshari, 2000, Fault detection and diagnosis of rotatingmachinery, IEEE Trans. Industrial Electronics, Vol. 47, pp. 1005-1014. https://doi.org/10.1109/41.873208
- Loparo, K.A., Falah, A.H., and Adams, M.L., 2003, “Model-based fault detection and diagnosis in rotating machinery,”Proceedings of the Tenth International Congress on Sound and Vibration, Stockholm, Sweden, pp. 1299-1306.
- Oppenheimer, C.H., and Loparo, K.A., 2002, “Physically based diagnosis and prognosis of cracked rotor shafts,”Component and Systems Diagnostics, Prognostics, and Health Management II, Vol. 4733, Bellingham, pp. 122-132.
- Sekhar, A.S., 2004, “Model-based identification of two cracks in a rotor system,” Mechanical Systems and Signal Processing,Vol. 18, pp. 977-983. https://doi.org/10.1016/S0888-3270(03)00041-4
- Choi, G.H. and Choi, G.S., 1996, “Application of minimum cross entropy to model-based monitoring in diamond turning,”Mechanical Systems and Signal Processing, Vol. 10, pp. 615-631. https://doi.org/10.1006/mssp.1996.0042
- Bartelmus, W., 2001, “Mathematical modeling and computer simulations as an aid to gearbox diagnostics,” MechanicalSystems and Signal Processing, Vol. 15, pp. 855-871. https://doi.org/10.1006/mssp.2001.1411
- Bartelmus, W., 2003, “Diagnostic information on gearbox condition for mechatronic systems,” Trans. of the Institute ofMeasurement and Control, Vol. 25, pp. 451-465. https://doi.org/10.1191/0142331203tm0099oa
- Hansen, R.J., Hall, D.L., and Kurtz, S.K., 1995, “A new approach to the challenge of machinery prognostics,” Journal ofEngineering for Gas Turbines and Power, Vol. 117, pp. 320-325. https://doi.org/10.1115/1.2814097
- Vania, A. and Pennacchi, P., 2004, “Experimental and theoretical application of fault identification measures of accuracy inrotating machine diagnostics,” Mechanical Systems and Signal Processing, Vol. 18, pp. 329-352. https://doi.org/10.1016/S0888-3270(03)00014-1
- Su, H. and Chong, K.T., 2007, “Induction machine condition monitoring using neural network modeling,” IEEE Trans.Industrial Electronics, Vol. 54, No. 1, pp. 241-249. https://doi.org/10.1109/TIE.2006.888786
- Liang, J. and Du, R., 2007, “Model-based fault detection and diagnosis of HVAC systems using support vector machinemethod,” International Journal of Refrigeration, Vol. 30, pp. 1104-1114. https://doi.org/10.1016/j.ijrefrig.2006.12.012
- Debebe, K., Rajagopalan, V., and Sankar, T.S., 1991, “Expert systems for fault diagnosis of VSI fedAC drive,” Proceeding ofIEEE-IAS Annual Meeting, pp. 368–373.
- Szczeny, R., Kurzunski, P., Piquet, H., and Iwan, K., 1996, “Knowledge-base system approach to power electronic systemfault diagnosis,” Proceeding of International Symposium Industrial Electronics, pp. 1005-1010.
- Filippetti, F., Martelli, M., Franceschini, G., and Tassoni, C., 1992, “Development of expert system knowledge base to on-linediagnosis of rotor electrical faults of induction motors,” Proceeding of IEEE-IAS Annual Meeting, pp. 92-99.
- Moyes, A., Burt, G.M., McDonald, J.R., Capener, J.R., Dray, J., and Goodfellow, R., 1995, “The application of expertsystems to fault diagnosis in alternators,” Proceeding of International Conference on Electrical Machines and Drives, pp. 171-175.
- Wu, J. D., Chiang, P. H., Chang, Y. W., and Shiao, Y., 2008, “An expert system for fault diagnosis in internal combustionengines using probability neural network,” Expert Systems with Applications, Vol. 34, No. 4, pp. 2704-2713. https://doi.org/10.1016/j.eswa.2007.05.010
- Wu, J.D., Wang, Y.H., and Bai, M.R., 2007, “Development of an expert system for fault diagnosis in scooter engine platformusing fuzzy-logic inference,” Expert Systems with Applications, Vol. 33, No. 4, pp. 1063-1075. https://doi.org/10.1016/j.eswa.2006.08.011
- Yang, B.S., Lim, D.S., and Tan, A.C.C., 2005, “VIBEX: an expert system for vibration fault diagnosis of rotating machineryusing decision tree and decision table,” Expert Systems with Applications, Vol. 28, No. 4, pp. 735-742. https://doi.org/10.1016/j.eswa.2004.12.030
- Yoon, Y.H., Yoon, E.S., and Chang, K.S., 1993, “Process fault diagnostics using the integrated graph model,” On-Line Fault Detection and Supervision in the Chemical Process Industries, Oxford, pp. 89-94.
- Hansen, C.H., Autar, R.K., and Pickles, J.M., 1994, “Expert systems for machine fault diagnosis,” Acoustics Australia, Vol.22, pp. 85-90.
- Baig, M.F. and Sayeed, N., 1998, “Model-based reasoning for fault diagnosis of twin-spool turbofans,” Proceedings of theInstitution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, Vol. 212, pp. 109-116. https://doi.org/10.1243/0954410981532171
- Wen, Z.Y., Crossman, J., Cardillo, J., and Murphey, Y.L., 2003, “Case base reasoning in vehicle fault diagnostics,”Proceedings of the International Joint Conference on Neural Networks 2003, Vol. 14, New York, pp. 2679-2684.
- Bengtsson, M., Olsson, E., Funk, P., and Jackson, M., 2004, “Technical design of condition based maintenance system – Acase study using sound analysis and case-based reasoning,” Proceedings of the Eighth Maintenance and Reliability Conference,Knoxville, USA.
- Araiza, M.L., Kent, R., and Espinosa, R., 2002, “Real-time, embedded diagnostics and prognostics in advanced artillerysystems,” IEEE Proceedings of Autotestcon, Systems Readiness Technology Conference, New York, pp. 818-841.
- Hall, D.L., Hansen, R.J., and Lang, D.C., 1997, “The negative information problem in mechanical diagnostics,” Trans. ASMEJournal of Engineering for Gas Turbines and Power, Vol. 119, pp. 370-377. https://doi.org/10.1115/1.2815584
- Stanek, M., Morari, M., and Frohlich, K., 2001, “Model-aided diagnosis: An inexpensive combination of model-based andcase-based condition assessment,” IEEE Trans. Systems, Man and Cybernetics Part C: Applications and Reviews, Vol. 31, pp.137-145.
- Mitchel, J., 1991, “Diagnostic expert system techniques for improving hydraulic maintenance of a continuous miningmachine,” Mining Engineering, Vol. 43, No. 4, pp. 419-422.
- Cawley, J.C., 1991, “On-line diagnostic maintenance systems for continuous mining machines,” Mining Engineering, Vol. 43,No. 12, pp. 1444-1448.
- Propes, N.C., 2003, “A fuzzy Petri net based mode identification algorithm for fault diagnosis of complex systems,” SystemDiagnosis and Prognosis: Security and Condition Monitoring, 5107 (III), pp. 44-53. https://doi.org/10.1117/12.486972
- Yang, S.K., 2003, “A condition – based failure-prediction and processing-scheme for preventive maintenance,” IEEE Trans.Reliability, Vol. 52, pp. 373–383. https://doi.org/10.1109/TR.2003.816402
- Yang, B.S., Jeong, S.K., Oh, Y.M., and Tan, A.C.C., 2004, “Case-based reasoning system with Petri nets for induction motorfault diagnosis,” Expert Systems with Applications, Vol. 27, pp. 301-311. https://doi.org/10.1016/j.eswa.2004.02.004
- Siddique, A., Yadava, G.S., and Singh, B., 2003, “Applications of artificial intelligence techniques for induction machinestator fault diagnostics: Review,” Proceedings of the IEEE International Symposium on Diagnostics for Electric Machines, PowerElectronics and Drives, New York, pp. 29-34.
- Roemer, M.J., Hong, C., and Hesler, S.H., 1996, “Machine health monitoring and life management using finite element-basedneural networks,” Trans. ASME Journal of Engineering for Gas Turbines and Power, Vol. 118, pp. 830-835. https://doi.org/10.1115/1.2817002
- Larson, E.C., Wipf, D.P., and Parker, B.E., 1997, “Gear and bearing diagnostics using neural network-based amplitude andphase demodulation,” Proceedings of the 51st Meeting of the Society for Machinery Failure Prevention Technology, VirginiaBeach, pp. 511-521.
- Li, B., Chow, M.Y., Tipsuwan, Y., and Hung, J.C., 2000, “Neural-network-based motor rolling bearing fault diagnosis,” IEEETrans. Industrial Electronics, Vol. 47, pp. 1060-1069. https://doi.org/10.1109/41.873214
- Fan, Y. and Li, C.J., 2002, “Diagnostic rule extraction from trained feedforward neural networks,” Mechanical Systems andSignal Processing, Vol. 16, pp. 1073-1081. https://doi.org/10.1006/mssp.2001.1396
- Yang, D.M., Stronach, A.F., Macconnell, P., and Penman, J., 2002, “Third-order spectral techniques for the diagnosis ofmotor bearing condition using artificial neural networks,” Mechanical Systems and Signal Processing, Vol. 16, pp. 391-411. https://doi.org/10.1006/mssp.2001.1469
- Paya, B.A., Esat, I.I., and Badi, M.N.M., 1997, “Artificial neural network based fault diagnostics of rotating machinery usingwavelet transforms as a preprocessor,” Mechanical Systems and Signal Processing, Vol. 11, pp. 751-765. https://doi.org/10.1006/mssp.1997.0090
- Samanta, B. and Al-Balushi, K.R., 2003, “Artificial neural network based fault diagnostics of rolling element bearings usingtime-domain features,” Mechanical Systems and Signal Processing, Vol. 17, pp. 317-328. https://doi.org/10.1006/mssp.2001.1462
- Spoerre, J.K., 1997, “Application of the cascade correlation algorithm (CCA) to bearing fault classification problems,”Computers in Industry, Vol. 32, pp. 295–304. https://doi.org/10.1016/S0166-3615(96)00080-2
- Baillie, D.C. and Mathew, J., 1996, “A comparison of autoregressive modeling techniques for fault diagnosis of rollingelement bearings,” Mechanical Systems and Signal Processing, Vol. 10, pp. 1-17. https://doi.org/10.1006/mssp.1996.0001
- Dong, D.W., Hopfield, J.J., and Unnikrishnan, K.P., 1997, “Neural networks for engine fault diagnostics,” Neural Networksfor Signal Processing VII, New York, pp. 636-644.
- Li, C.J. and Huang, T.Y., 1999, “Automatic structure and parameter training methods for modeling of mechanical systems byrecurrent neural networks,” Applied Mathematical Modelling, Vol. 23, pp. 933-944. https://doi.org/10.1016/S0307-904X(99)00020-7
- Deuszkiewicz, P. and Radkowski, S., 2003, “On-line condition monitoring of a power transmission unit of a rail vehicle,”Mechanical Systems and Signal Processing, Vol. 17, pp. 1321-1334. https://doi.org/10.1006/mssp.2002.1578
- Wang, C.C. and Too, G.P.J., 2002, “Rotating machine fault detection based on HOS and artificial neural networks,” Journal ofIntelligent Manufacturing, Vol. 13, pp. 283-293. https://doi.org/10.1023/A:1016024428793
- Tallam, R.M., Habetler, T.G., and Harley, R.G., 2002, “Self-commissioning training algorithms for neural networks withapplications to electric machine fault diagnostics,” IEEE Trans. Power Electronics, Vol. 17, pp. 1089-1095. https://doi.org/10.1109/TPEL.2002.805611
- Sohn, H., Worden, K., and Farrar, C.R., 2002, “Statistical damage classification under changing environmental andoperational conditions,” Journal of Intelligent Material Systems and Structures, Vol. 13, pp. 561-574. https://doi.org/10.1106/104538902030904
- Silva, R.G., Reuben, R.L., Baker, K.J., and Wilcox, S.J., 1998, “Tool wear monitoring of turning operations by neuralnetwork and expert system classification of a feature set generated from multiple sensors,” Mechanical Systems and SignalProcessing, Vol. 12, pp. 319-332. https://doi.org/10.1006/mssp.1997.0123
- DePold, H.R. and Gass, F.D., 1999, “The application of expert systems and neural networks to gas turbine prognostics anddiagnostics,” Journal of Engineering for Gas Turbines and Power, Vol. 121, pp. 607-612. https://doi.org/10.1115/1.2818515
- Yang, B.S., Han, T., and Kim, Y.S., 2004, “Integration of ART-Kohonen neural network and case-based reasoning forintelligent fault diagnosis,” Expert Systems with Applications, Vol. 26, pp. 387-395. https://doi.org/10.1016/j.eswa.2003.09.009
- Garga, A.K., McClintic, K.T., Campbell, R.L., Yang, C.C., Lebold, M.S., Hay, T.A., and Byington, C.S., 2001, “Hybridreasoning for prognostic learning in CBM systems,” Proceeding of IEEE Aerospace Conference, Vols. 1-7, New York, pp. 2957-2969.
- Mechefske, C.K., 1998, “Objective machinery fault diagnosis using fuzzy logic,” Mechanical Systems and Signal Processing,Vol. 12, pp. 855-862. https://doi.org/10.1006/mssp.1998.0173
- Du, R. and Yeung, K., 2004, “Fuzzy transition probability: A new method for monitoring progressive faults. Part 1: Thetheory,” Engineering Applications of Artificial Intelligence, Vol. 17, pp. 457-467. https://doi.org/10.1016/j.engappai.2004.04.019
- Zhang, S., Asakura, T., Xu, X.L., and Xu, B.J., 2003, “Fault diagnosis system for rotary machine based on fuzzy neuralnetworks,” JSME International Journal, Mechanical Systems, Machine Elements and Manufacturing, Vol. 46, pp. 1035-1041.
- Lou, X. and Loparo, K.A., 2004, “Bearing fault diagnosis based on wavelet transform and fuzzy inference,” MechanicalSystems and Signal Processing, Vol. 18, pp. 1077-1095. https://doi.org/10.1016/S0888-3270(03)00077-3
- T.I. Liu, J.H. Singonahalli, N.R. Iyer, 1996, Detection of roller bearing defects using expert system and fuzzy logic,Mechanical Systems and Signal Processing, Vol. 10, pp. 595-614. https://doi.org/10.1006/mssp.1996.0041
- Chang, S.H., Kang, K.S., Choi, S.S., Kim, H.G., Jeong, H.K., and Yi, C.U., 1995, “Development of the on-line operator aidsystem OASYS using a rule-based expert system and fuzzy logic for nuclear power plants,” Nuclear Technology, Vol. 112, pp.266-294. https://doi.org/10.13182/NT95-A35179
- Chen, Z.Y., He, Y.Y., Chu, F.L., and Huang, J.Y., 2003, “Evolutionary strategy for classification problems and its applicationin fault diagnostics,” Engineering Applications of Artificial Intelligence, Vol. 16, pp. 31-38. https://doi.org/10.1016/S0952-1976(03)00027-7
- Huang, Y.C. and Huang, C.M., 2002, “Evolving wavelet networks for power transformer condition monitoring,” IEEE Trans.Power Delivery, Vol. 17, pp. 412-416. https://doi.org/10.1109/61.997908
- Yan, G.T. and Ma, G.F., 2004, “Fault diagnosis of diesel engine combustion system based on neural networks,” Proceedingsof the 2004 International Conference on Machine Learning and Cybernetics, Vol. 5, Shanghai, China, pp. 3111-3114.
- Widodo, A. and Yang, B.S., 2007, “Support vector machine in machine condition monitoring and fault diagnosis,”Mechanical Systems and Signal Processing, Vol. 21, pp. 2560-2574. https://doi.org/10.1016/j.ymssp.2006.12.007
- Shukri, M., Khalid, M., Yusuf, R., and Shafawi, M., 2004, “Induction Machine Diagnostic using Adaptive Neuron FuzzyInference System,” M. Gh. Negoita et al. (Eds.), KES 2004, pp. 380-387.
- Lou, X. and Loparo, K.A., 2004, “Bearing Fault Diagnosis Based on Wavelet Transform and Fuzzy Inference,” MechanicalSystems and Signal Processing, Vol. 18, pp. 1077-1095. https://doi.org/10.1016/S0888-3270(03)00077-3
- Tran, V.T., Yang, B.S., Oh, M.S., and Tan, A.C.C., 2009, “Fault diagnosis of induction motor based on decision trees andadaptive neuro-fuzzy inference,” Expert Systems with Applications, Vol. 36, No. 2, pp. 1840-1849. https://doi.org/10.1016/j.eswa.2007.12.010
- Ye, Z., Sadeghian, A., and Wu, B., 2006, “Mechanical fault diagnosis for induction motor with variable speed drives usingadaptive neuro-fuzzy inference system,” Electric Power Systems Research, Vol. 76, pp. 742-752. https://doi.org/10.1016/j.epsr.2005.10.011
- Lei, Y., He, Z., Zi, Y., and Hu, Q., 2007, “Fault Diagnosis of Rotating Machinery Based on Multiple ANFIS Combinationwith GAs,” Mechanical Systems and Signal Processing, Vol. 21, No. 5, pp. 2280-2294. https://doi.org/10.1016/j.ymssp.2006.11.003
- Wang, W., Ismail, F., and Golnaraghi, F., 2004, “A Neuro-Fuzzy Approach to Gear System Monitoring,” IEEE Trans. FuzzySystems, Vol. 12, No. 5, pp. 710-723. https://doi.org/10.1109/TFUZZ.2004.834807
- Zio, E. and Gola, G., 2008, “A neuro-fuzzy technique for fault diagnosis and its application to rotating machinery,” ReliabilityEngineering and System Safety, Vol. 94, No. 1, pp. 78-88.
- Juez, J., Sainz, G.I., Moya, E.J., and Perán, J.R., 2001, “Early Detection and Diagnosis of Faults in an AC Motor Using NeuroFuzzy Techniques: FasArt + Fuzzy k Nearest Neighbors,” LNCS 2085, pp. 571-578.
- Shukri, M., Khalid, M., Yusuf, R., and Shafawi, M., 2004, “Induction Machine Diagnostic Using Adaptive Neuro Fuzzy Inferencing System,” LNAI 3215, pp. 380-387.
- Yan, J., Koc, M., and Lee, J., 2004, “A prognostic algorithm for machine performance assessment and its application,”Production Planning and Control, Vol. 15, pp. 796-801. https://doi.org/10.1080/09537280412331309208
- Phelps, E., Willett, P., and Kirubarajan, T., 2001, “A statistical approach to prognostics,” Component and Systems Diagnostics, Prognosis and Health Management, Vol. 4389, pp. 23-34.
- Banjevic, D. and Jardine, A.K.S., 2005, “Calculation of reliability function and remaining useful life for a Markov failuretime process,” IMA Journal of Management Mathematics, to appear, doi:10.1093/imaman/dpi029.
- Vlok, P.J., Wnek, M., and Zygmunt, M., 2004, “Utilising statistical residual life estimates of bearings to quantify theinfluence of preventive maintenance actions,” Mechanical Systems and Signal Processing, Vol. 18, pp. 833-847. https://doi.org/10.1016/j.ymssp.2003.09.003
- Chinnam, R.B. and Baruah, P., 2003, “Autonomous diagnostics and prognostics through competitive learning driven HMMbasedclustering,” Proceedings of the International Joint Conference on Neural Networks, Vols. 1-4, New York, pp. 2466-2471.
- Kwan, C., Zhang, X., Xu, R., and Haynes, L., 2003, “A novel approach to fault diagnostics and prognostics,” Proceedings ofthe 2003 IEEE International Conference on Robotics and Automation, Vols. 1-3, New York, pp. 604-609.
- Lin, D. and Makis, V., 2004, “Filters and parameter estimation for a partially observable system subject to random failurewith continuous range observations,” Advances in Applied Probability, Vol. 36, pp. 1212-1230. https://doi.org/10.1239/aap/1103662964
- Wang, W., Scarf, P.A., and Smith, M.A.J., 2000, “On the application of a model of condition-based maintenance,” Journal ofthe Operational Research Society, Vol. 51, pp. 1218-1227. https://doi.org/10.1057/palgrave.jors.2601042
- Wang, W., 2002, “A model to predict the residual life of rolling element bearings given monitored condition information todate,” IMA Journal of Management Mathematics, Vol. 13, pp. 3-16. https://doi.org/10.1093/imaman/13.1.3
- Ray, A. and Tangirala, S., 1996, “Stochastic modeling of fatigue crack dynamics for on-line failure prognostics,” IEEETrans. Control Systems Technology, Vol. 4, pp. 443-451. https://doi.org/10.1109/87.508893
- Li, Y., Billington, S., Zhang, C., Kurfess, T., Danyluk, S., and Liang, S., 1999, “Adaptive prognostics for rolling elementbearing condition,” Mechanical Systems and Signal Processing, Vol. 13, pp. 103-113. https://doi.org/10.1006/mssp.1998.0183
- Li, Y., Kurfess, T.R., and Liang, S.Y., 2000, “Stochastic prognostics for rolling element bearings,” Mechanical Systems andSignal Processing, Vol. 14, pp. 747-762. https://doi.org/10.1006/mssp.2000.1301
- Oppenheimer, C.H., and Loparo, K.A., 2002, “Physically based diagnosis and prognosis of cracked rotor shafts,”Component and Systems Diagnostics, Prognostics, and Health Management II 4733, pp. 122-132.
- Chelidze, D. and Cusumano, J.P., 2004, “A dynamical systems approach to failure prognosis,” Journal of Vibration andAcoustics, Vol. 126, pp. 2-8. https://doi.org/10.1115/1.1640638
- Luo, J., Bixby, A., Pattipati, K., Qiao, L., Kawamoto, M., and Chigusa, S., 2003, “An interacting multiple model approachto model-based prognostics,” System Security and Assurance, Vol. 1, pp. 189-194.
- Kacprzynski, G.J., Sarlashkar, A., and Roemer, M.J., 2004, “Predicting remaining life by fusing the physics of failuremodeling with diagnostics,” Journal of Metal, Vol. 56, pp. 29-35.
- Cempel, C., Natke, H.G., and Tabaszewski, M., 1997, “A passive diagnostic experiment with ergodic properties,”Mechanical Systems and Signal Processing, Vol. 11, pp. 107-117. https://doi.org/10.1006/mssp.1996.0064
- Zhang, Q.C., Seth, B.B., and Liang, S.Y., 2002, “Damage mechanics approach for bearing lifetime prognostics,” MechanicalSystems and Signal Processing, Vol. 16, pp. 817-829. https://doi.org/10.1006/mssp.2002.1483
- Lesieutre, G.A., Fang, L., and Lee, U., 1997, “Hierarchical failure simulation for machinery prognostics,” Critical Link:Diagnosis to Prognosis, Haymarket, pp. 103-110.
- Engel, S.J., Gilmartin, B.J., Bongort, K., and Hess, A., 2000, “Prognostics, the real issues involved with predicting liferemaining,” IEEE Aerospace Conference Proceedings, Vol. 6, New York, pp. 457-469.
- Zhang, S. and Ganesan, R., 1997, “Multivariable trend analysis using neural networks for intelligent diagnostics of rotatingmachinery,” Trans. ASME Journal of Engineering for Gas Turbines and Power, Vol. 119, pp. 378-384. https://doi.org/10.1115/1.2815585
- Wang, P. and Vachtsevanos, G., 2001, “Fault prognostics using dynamic wavelet neural networks,” AI EDAM-ArtificialIntelligence for Engineering Design Analysis and Manufacturing, Vol. 15, pp. 349-365. https://doi.org/10.1017/S0890060401154089
- Huang, R., Xi, L., Li, X., Liu, C.R., Qiu, H., and Lee, J., 2007, “Residual life prediction for ball bearings based on self-organizingmap and back propagation neural network methods,” Mechanical Systems and Signal Processing, Vol. 21, pp. 193-207. https://doi.org/10.1016/j.ymssp.2005.11.008
- Wang, W.Q., Golnaraghi, M.F., and Ismail, F., 2004, “Prognosis of machine health condition using neuro-fuzzy system,”Mechanical System and Signal Processing, Vol. 18, pp. 813-831. https://doi.org/10.1016/S0888-3270(03)00079-7
- Yam, R.C.M., Tse, P.W., Li, L., and Tu, P., 2001, “Intelligent predictive decision support system for condition-basedmaintenance,” International Journal of Advanced Manufacturing Technology, Vol. 17, pp. 383-391. https://doi.org/10.1007/s001700170173
- Dong, Y.L., Gu, Y.J., Yang, K., and Zhang, W.K., 2004, “A combining condition prediction model and its application inpower plant,” Proceedings of the International Conference on Machine Learning and Cybernetics, Shanghai, China, Vol. 6, pp.3474-3478.
- Tran, V.T., Yang, B.S., Oh, M.S., and Tan, A.C.C., 2008, “Machine condition prognosis based on regression trees and one-step-ahead prediction,” Mechanical Systems and Signal Processing, Vol. 22, No. 5, pp. 1179-1193. https://doi.org/10.1016/j.ymssp.2007.11.012
- Liu, J., Wang, W., and Golnaraghi, F., in press, “A multi-step predictor with a variable input pattern for system stateforecasting,” Mechanical Systems and Signal Processing.
- Lee, J., Ni, J., Djurdjanovic, D., Qiu, H., and Liao, H., 2006, “Intelligent prognostics tools and e-maintenance,” Computersin Industry, Vol. 57, pp. 476-489. https://doi.org/10.1016/j.compind.2006.02.014
- Djurdjanovic, D., Lee, J., and Ni, J., 2003, “Watchdog Agent-an infotronics-based prognostics approach for productperformance degradation assessment and prediction,” Advanced Engineering Informatics, Vol. 17, pp. 109-125. https://doi.org/10.1016/j.aei.2004.07.005
- http://www.imscenter.net
Cited by
- Impact performance for high frequency hydraulic rock drill drifter with sleeve valve vol.9, pp.1, 2016, https://doi.org/10.5293/IJFMS.2016.9.1.039
- A locally adaptive ensemble approach for data-driven prognostics of heterogeneous fleets vol.231, pp.4, 2017, https://doi.org/10.1177/1748006X17693519
- Energy Harvesting Technologies for Achieving Self-Powered Wireless Sensor Networks in Machine Condition Monitoring: A Review vol.18, pp.12, 2018, https://doi.org/10.3390/s18124113