References
- L. Tong, A. P. Mouritz and M. K. Bannister, 3D Fiber Reinforced Polymer Composites. Elsevier Science Ltd., Oxford, UK (2002)
- K. Dransfield, C. Baillie and Y.W.Mai, Improving the delamination resistance of CFRP by stitching-a review, Compos. Sci. Technol. 50, 305–317 (1994) https://doi.org/10.1016/0266-3538(94)90019-1
- L. Jain and Y. W. Mai, On the effect of stitching on mode I delamination toughness of laminated composites, Compos. Sci. Technol. 51, 331–345 (1994) https://doi.org/10.1016/0266-3538(94)90103-1
- L. Jain and Y. W. Mai, Determination of mode II delamination toughness of stitched laminated composites, Compos. Sci. Technol. 55, 241–253 (1995) https://doi.org/10.1016/0266-3538(95)00089-5
- A. P. Mouritz, J. Gallagher and A. A. Goodwin, Flexural strength and interlaminar shear strength of stitched GRP laminates following repeated impacts, Compos. Sci. Technol. 57, 509–522 (1997) https://doi.org/10.1016/S0266-3538(96)00164-9
- F. Larsson, Damage tolerance of a stitched carbon/epoxy laminate, Composites Part A 28A, 923–934 (1997) https://doi.org/10.1016/S1359-835X(97)00063-8
- K. A. Dransfield, L. K. Jain and Y. W. Mai, On the effects of stitching in CFRPs-I. Mode I delamination toughness, Compos. Sci. Technol. 58, 815–827 (1998) https://doi.org/10.1016/S0266-3538(97)00229-7
- L. K. Jain, K. A. Dransfield and Y. W. Mai, On the effects of stitching in CFRPs-II. Mode II delamination toughness, Compos. Sci. Technol. 58, 829–837 (1998) https://doi.org/10.1016/S0266-3538(97)00186-3
- Y. Iwahori, T. Ishikawa, Y. Hayashi and N. Watanabe, Study of interlaminar fracture toughness improvement on stitched CFRP laminates, J. Japan Soc. Compos. Mater. 26, 90–100 (2000)
- A. P. Mouritz, Ballistic impact and explosive blast resistance of stitched composites, Composites Part B 32B, 431–439 (2001) https://doi.org/10.1016/S1359-8368(01)00015-4
- Y. Iwahori, S. Sugimoto, Y. Hayashi, S. Horikawa, T. Ishikawa and H. Fukuda, Study of mechanical properties under through-the-thickness loads for stitched CFRP laminates by using tension test specimens with a single stitch thread, J. Japan Soc. Compos. Mater. 32, 22–31 (2006)
- D. Liu, Delamination resistance in stitched and unstitched composite plates subjected to impact loading, J. Reinf. Plast. Compos. 9, 59–69 (1990) https://doi.org/10.1177/073168449000900104
- E. Wu and J. Liau, Impact of unstitched and stitched laminates by line loading, J. Compos. Mater. 28, 1640–1658 (1994) https://doi.org/10.1177/002199839402801702
- E. Wu and J. Wang, Behavior of stitched laminates under in-plane tensile and transverse impact loading, J. Compos. Mater. 29, 2254–2279 (1995) https://doi.org/10.1177/002199839502901702
- M. V. Hosur, M. Adya, J. Alexander, S. Jeelani, U. Vaidya and A. Mayer, Studies on impact damage resistance of affordable stitched woven/epoxy composite laminates, J. Reinf. Plast. Compos. 22, 927–952 (2003)
- I. Herszberg and T. Weller, Impact damage resistance of buckled carbon/epoxy panels, Compos. Struct. 73, 130–137 (2006) https://doi.org/10.1016/j.compstruct.2005.11.049
- R. Kamiya, B. A. Cheeseman, P. Popper and C. T. Wei, Some recent advantages in the fabrication and design of three-dimensional textile preforms: a review, Compos. Sci. Technol. 60, 33–47 (2000) https://doi.org/10.1016/S0266-3538(99)00093-7
- M. O. W. Richardson and M. J. Wisheart, Review of low-velocity impact properties of composite materials, Composites Part A 27A, 1123–1131 (1996) https://doi.org/10.1016/1359-835X(96)00074-7
- A. T. Nettles and M. J. Douglas, A comparison of quasi-static indentation to low-velocity impact, NASA TP-2000-210481 (2000)
- D. D. R. Cartie, B. N. Cox and N. A. Fleck, Mechanisms of crack bridging by composite and metallic rods, Composites Part A 35A, 1325–1336 (2004) https://doi.org/10.1016/j.compositesa.2004.03.006