운전 중인 전력용 변압기(154kV)의 부하용량과 경년이 진동에 미치는 영향

Effect on Vibration According to the Load Capability and Elapsed Year of Power Transformer(154kV) in Operation

  • 발행 : 2009.06.01

초록

Most of the causes of the failures of power transformers in operations are mechanical defects due to vibration. To identify these causes, the vibration phenomenon was measured from the power transformers in operation in the substations under the Daejeon power transmission district office of KEPCO. The measurement was performed in a 6${times}$4 structure on one side of the transformer. The vibration of the measured points was presented in 2D and 3D, and analyzed. The results according to the period in use of the transformer and the load applied to the transformer were analyzed. These results will be used as basic data to establish the vibration standard for the power transformer, In addition, with a load capability and vibration phenomenon correlation and regression analysis to identify by way of function was reached. And the vibration phenomenon pass a years with changes and to analyze correlation, was estimated to bring in the function. And then through the analysis of power transformers to set standards based on vibration data was used to.

키워드

참고문헌

  1. Mou, Gang "Modeling and Control of a Magnetostrictice System for High Precision Actuation at a Particular Frequency", pp4~5, 2002
  2. R. V. Dukkipati, J. Srinivas, "Advanced Mechanical Vibration", pp. 99-103, 2007
  3. "Acceptance code for gears - part 2 : Determination of mechanical vibrations of gear units during acceptance testing", ISO Code 8579-2
  4. "Acoustis-Characterization of sources of structure-bone sound with respect to sound radiation from connected structures-Measurement of velocity at the contact points of machinery when resiliently mounted", ISO Code 9611
  5. "Mechanical vibration of non-reciprocating machines-Measurements on rdating shafts and evaluation criterial", ISO Code 7919-1
  6. "Mechanical vibration and shock-Mechanical mounting of accelerometer", ISO Code 5848
  7. "Aceptance code for gears - part1: Determination of air bone sound power levels emitted by gear units", ISO Code 8579-1
  8. David Jiles, "Introduction to magnetism and magnetic materials", Chapman and Hall, pp. 89-106, 1991
  9. M.J. Dapino, R. C. Smith, A.B. Flatau "An active and structural strain model for magnetostrictive transduers", SPIE symposium on Smart Structures and Materials, pp.#3329-24, 1998
  10. Ji Shengchang; Luo Yongfen; Li Yanming "Research on extraction technique of transformer core fundamental frequency vibration based on OLCM" IEEE Transactions on Power Delivery, Vol 21, No4, pp. 1981-1988, 2006 https://doi.org/10.1109/TPWRD.2006.876665
  11. Ji Shengchang; Shan Ping, Li Yanming, Xu Dake; Cao Junling "The vibration measuring system for monitoring core and winding condition of power transformer" Proceedings of 2001 Internationl Symposium on Electrical Insulating Materials (ISEIM 2001), pp. 849-852
  12. 정충영, 최이규, "SPSSWIN을 이용한 통계분석", 3rd-Edition, 무역경영사, 1996
  13. KS B 0714, 2001