Abstract
The precursor polyimide of the photoreactive polyimides(PI-SP6 and PI-SP12) was prepared from a derivative of 2, 2, 2-trifluoroethane dianhydride and 3,3'-dihydroxy-4,4'-diaminobiphenyl. PI-SP6 and PI-SP12 were then prepared by the polymer reactions of the precursor polyimide with photoreactive 2-styrylpyridine alkylene (hexylene and dodecylene) derivatives, respectively. The photoreactive polymers were soluble in organic solvents. The polymers showed the initial decomposition temperatures around $350^{\circ}C$. The glass transition temperatures of PI-SP6 and PI-SP12 were found to be $130^{\circ}C$ and $85^{\circ}C$, respectively. This result means that the latter polymer is more flexible than the former polymer. Their transmittance in the film state was 90% at $250^{\circ}C$, which indicates that the photosensitive polyimides with thermal stability have high optical transparency even at the high temperature. The respective dichroic ratios of PI-SP6 and PI-SP12 were found to be 0.01 and 0.03 at an exposure energy of $1.5\;J/cm^2$. This result suggests that the latter polymer with larger flexibility compared to the former polymer is more effective for the photoalignment.
감광성 폴리이미드의 전구체 폴리이미드는 2, 2, 2-트리플루오르에탄 디안하이드라이드의 유도체와 3,3'-디히드록시-4,4'-디아미노비페닐로부터 제조하였다. 감광성 폴리이미드(PI-SP6와 PI-SP12)는 전구체 폴리이미드와 감광성 2-스티릴피리딘알킬렌(헥실렌과 도데실렌)유도체로부터 제조하였다. 합성한 광반응성 폴리이미드는 여러 가지 유기 용매에 잘 녹았다. 감광성 폴리이미드의 초기 열분해온도는 $350^{\circ}C$였다. PI-SP6와 PI-SP12의 유리전이온도는 $130^{\circ}C$와 $85^{\circ}C$였다. 이는 헥실렌기를 가지는 PI-SP6 보다 도데실렌기를 가지는 PI-SP12가 유연하다는 것을 의미한다. 이들 감광성 고분자의 필름은 $250^{\circ}C$에서도 90%의 투과율을 유지하였다. 이 결과는 이들 감광성 폴리이미드가 투명성 및 내열성이 우수한 고분자라는 것을 의미한다. PI-SP6와 PI-SP12는 $1.5\;J/cm^2$ 광량에서 이색비가 각각 0.01과 0.03이었다. 이 결과는 광배향에 유연한 알킬렌 스페이서를 가지는 감광성 폴리이미드가 보다 효과적이라는 것을 뜻한다.