References
- R. Jeremy, The Hydrogen Economy, (2002)
- Energy Information Administration, http://www.eia.doe.gov/
- K.J. Bu, “National Vision for Hydrogen Economy and Its Action plan Set up,” Energy Economy Research, 4(2), 129-147, (2005)
- J. Chang, Y.W. Kim, K.Y. Lee, Y.W. Lee, W.J. Lee, J.M. Noh, M.H. Kim, H.S. Lim, Y.J. Shin, K.K. Bae, and K.D. Jung, “A Study of a Nuclear Hydrogen production Demonstration Plant,” Nuclear Engineering and Technology, 39(2), 111-122, (2007) https://doi.org/10.5516/NET.2007.39.2.111
- M. Richards and A. Shenoy, “H2-MHR Pre-conceptual Design Summary for Hydrogen Production,” Nuclear Engineering and Technology, 39(1), 1-8(2007) https://doi.org/10.5516/NET.2007.39.1.001
- H. Nabielek, W. Kuhnlein, W. Schenk, W. Heit, A. Christ, H. Ragoss, “Development of Advanced HTR Fuel Elements,” Nuclear Engineering and Design, 121, 199-210, (1990) https://doi.org/10.1016/0029-5493(90)90105-7
- R. A. Simon and P. D. Capp, “Operating Experience with the Dragon High Temperature Reactor Experiment) by Reverses Osmosis(RO),” Proceedings of 1st International Topical Meeting on HTR, Petten, April.22-24, (2002)
- K.I. Kingrey, Fuel Summary for Peach Bottom Unit 1 High- Temperature Gas-Cooled Reactor Cores 1 and 2, INEEL/ EXT-03-00103, (2003)
- E. Wahlen and P. Pohl, AVR Operational Experience, Overview, FZJ, (2001)
- S. Saito et al. Design of High Temperature Engineering Test Reactor (HTTR), JAERI-1332, (1994)
- D. Zhong and Y. Xu, Progress of the HTR-10 project, IAEATECDOC- 899, (1995)
- F.A.Silady, J.C.Cunliffe, and L.P.Walker, “The Licensing Experience of the Modular High-Temperature Gas-Cooled Reactor (MHTGR),” Proc. of TCM, SanDiego, 21-23 Sept. (1988)
- A. Shenoy, Gas Turbine Modular Helium Reactor (GT-MHR) Conceptual Design Description Report, GA report 910720, (1996)
- Z. Wu and Y. Dong, “Introduction of HTR-PM Demonstration Project,” Proceedings of IAEA TM on Safety Aspects of Modular HTGRs, Beijing, 23-26 Oct. (2007)
- K. Weaver, et.al, NGNP Preliminary Project Management Plan, INL/EXT-05-00952, (2006)
- K. Kunitomi, et al., 'JAEA's VHTR for Hydrogen and Electricity Cogeneration: GTHTR300C,' Nuclear Engineering and Technology, 39(1), 9-20, (2007)' https://doi.org/10.5516/NET.2007.39.1.009
- S.A. Wright and P.S. Pickard, “Impact of Closed Brayton Cycle Test Results on Gas Cooled Reactor Operation and Safety,” Proceedings of ICAPP 2007, Nice, France, May 13-18, (2007)
- M. Richards, et al., “VHTR Deep Burn Applications,” Proceedings of PBNC-16, Aomori, Japan, Oct. 13-18, (2008)
- D. Hinttner, et al., “A New Impetus for Developing Industrial Process Heat Applications of HTR in Europe,” Proceedings of HTR 2008, Washington DC, Sept30-Oct.1, (2008) https://doi.org/10.1115/HTR2008-58259
- Y.W. Kim, et al., “Gas Cooled Reactor, Its Potential Applications for Process Heat” IAEA TM on Non electric Applications of Nuclear Energy, Daejeon, March 3-6, (2009)
- W. Kriel, et al., “The Potential of the PBMR for Process Heat Applications,” Proceedings HTR-2006, Johannesburg, RSA, Oct.1-4, 2006
- J. Chang “Challenges for Production of Hydrogen Using Nuclear Energy,” IAEA TM on Non electric Applications of Nuclear Energy, Daejeon, March 3-6, (2009)
- M. Ogawa, Nishihara, “Japan's HTTR, Tetsuo,” Nuclear Engineering and Design, 233(1-3), 5-10, (2004) https://doi.org/10.1016/j.nucengdes.2004.07.018
- R. Elder and R. Allen, “Nuclear Heat for Hydrogen Production : Coupling a Very High/High Temperature Reactor to a Hydrogen Production Plant,” Progress in Nuclear Energy, 51, 500-525, (2009) https://doi.org/10.1016/j.pnucene.2008.11.001
- R. Kuhr, “HTR’s Role in Process Heat Application,” Nuclear Engineering and Design, 238(11) 3013-3017, (2008) https://doi.org/10.1016/j.nucengdes.2008.02.018
- H. Ohashi et al., “Development of Control Technology for HTTR Hydrogen Production System with Mock-up Test Facility - System Controllability Test for Loss of Chemical Reaction.” Nuclear Engineering and Design 236, 1396- 1410, (2006) https://doi.org/10.1016/j.nucengdes.2006.01.005
- K. Suruoka, T. Inatani, T. Miyasugi, and M. Mizuno, “Design Study of Nuclear Steelmaking System,” Transaction of the Iron and Steel Institute of Japan, 23(12), 1091-1101, (1983) https://doi.org/10.2355/isijinternational1966.23.1091
- J. Astier, J.C. Krug and Y. De Lassat de Pressigny, 'Technico- Economic Potentialities of Hydrogen Utilization for Steel Production,' Int. J. Hydrogen Energy, 7(8), 671-679, (1982) https://doi.org/10.1016/0360-3199(82)90192-6
- C. O. Bolthrunis, R. Kuhr, A.E. Finan, “Using a PBMR to Heat a Steam-Methane Reformer: Technology and Economics,” Proceedings of the 3rd International Topical Meeting on High Temperature Reactor Technology, Paper 100000118, (2006)
- W.J. Lee, et al., “Status of Nuclear Hydrogen Project in Korea”, ANS Embedded Topical on ST-NH2, Boston, USA, Jun 24~28 (2007)
- C.K. Jo and J.M Noh, “Preliminary Core Design Analysis of a 200MWth Pebble Bed-type VHTR,” Proceedings. of the Korean Nuclear Society Spring Meeting, Jeju, Korea, (2007)
- M.H. Kim, et al. “Computational Assessment of the Vessel Cooling Design Options for a VHTR,” Proceedings of the Korean Nuclear Society Autumn Meeting, Pyeongchang, Oct.30-31, Korea, (2008)
- Y. Shin, Pre-evaluation of Nuclear Hydrogen process, NHDD-HI-CA-08-06, KAERI Report, (2008)
Cited by
- A Practical Method for Whole-Core Thermal Analysis of a Prismatic Gas-Cooled Reactor vol.177, pp.3, 2012, https://doi.org/10.13182/NT12-A13480
- High-Temperature Structural Analysis of a Small-Scale PHE Prototype under the Test Condition of a Small-Scale Gas Loop vol.2012, pp.1687-6083, 2012, https://doi.org/10.1155/2012/312080
- Macroscopic Structural Analysis on a 10 kW Class Lab-Scale Process Heat Exchanger Prototype under a High-Temperature Gas Loop Condition vol.05, pp.01, 2013, https://doi.org/10.4236/eng.2013.51A017
- Macroscopic High-Temperature Structural Analysis Model of Small-Scale PCHE Prototype (II) vol.35, pp.9, 2011, https://doi.org/10.3795/KSME-A.2011.35.9.1137
- High-Temperature Structural Analysis of a Small-Scale Prototype of a Process Heat Exchanger (IV) - Macroscopic High-Temperature Elastic-Plastic Analysis - vol.35, pp.10, 2011, https://doi.org/10.3795/KSME-A.2011.35.10.1249
- Macroscopic High-Temperature Structural Analysis Model for a Small-Scale PCHE Prototype (I) vol.35, pp.11, 2011, https://doi.org/10.3795/KSME-A.2011.35.11.1499
- Macroscopic High-Temperature Structural Analysis of PHE Prototypes Considering Weld Material Properties vol.36, pp.9, 2012, https://doi.org/10.3795/KSME-A.2012.36.9.1095
- High-Temperature Structural Analysis of a Small-Scale PHE Prototype - Analysis Considering Material Properties in Weld Zone - vol.36, pp.10, 2012, https://doi.org/10.3795/KSME-A.2012.36.10.1289
- High-Temperature Structural Analysis of a Medium-Scale Process Heat Exchanger Prototype vol.36, pp.10, 2012, https://doi.org/10.3795/KSME-A.2012.36.10.1283
- Evaluation of Elastic Structural Integrity of a 70 kW Class Lab-Scale PCHE Prototype under the Test Conditions of HELP vol.577-578, pp.1662-9795, 2013, https://doi.org/10.4028/www.scientific.net/KEM.577-578.333
- Evaluation of High-Temperature Structural Integrity Using Lab-Scale PCHE Prototype vol.37, pp.9, 2013, https://doi.org/10.3795/KSME-A.2013.37.9.1189