References
- Y. H. Kim, T. W. Kim, Y. S. Lee, J. H. Lee, 2004, A Study on the Springback of High-Strength TRIP Steel, Transactions of Material Processing, Vol. 13, No. 5, pp. 409-414 https://doi.org/10.5228/KSPP.2004.13.5.409
- J. H. Song, H. Huh, S. H. Kim, S. H. Park, 2005, Springback Reduction in Stamping of Front Side Member with a Response Surface Method, Numisheet 2005, American Institute of Physics, CP778, Volume A, pp. 303-308
- Jae Ho Lee, Dong Woo Kim, Sung Man Sohn,, Mun Yong Lee, Young Hoon Moon, 2007, Analysis of Springback of Sheet Metal(Ⅰ): Based on the Residual Differential Strain, Transactions of Material Processing, Vol. 16, No. 7, pp. 509-515 https://doi.org/10.5228/KSPP.2007.16.7.509
- Jae Ho Lee, Dong Woo Kim, Sung Man Sohn,, Mun Yong Lee, Young Hoon Moon, 2007, Analysis of Springback of Sheet Metal(Ⅱ): Experimental Validation of Analytical Model, Transactions of Material Processing, Vol. 16, No. 7, pp. 516-520 https://doi.org/10.5228/KSPP.2007.16.7.516
- J. B. Yang,, B. H. Jeon, S. I. Oh, 2000, A Study of the Springback Reduction in aluminum Sheet Forming Using Response Surface Method, Transactions of Material Processing, Vol. 9, No. 5, pp. 526-532
- S. H. Chang, J. M. Shin, D. G. Seo, 2003, Springback Characteristics of Tailor-Welded Strips in U-bending, Transactions of Material Processing, Vol. 12, No. 5, pp. 440-448 https://doi.org/10.5228/KSPP.2003.12.5.440
- W. Y. Yang, S. Y. Lee, Y. T. Keum, J. Y. Hwang, C. S. Yoon, C. S. Shin, W. S. Cho, 2003, Springback Control in the Forming Processes for High-Strength Steel Sheets, Transactions of Material Processing , Vol. 12, No. 8, pp. 718-723 https://doi.org/10.5228/KSPP.2003.12.8.718
- F. Pourboghrat, E. Chu, 1995, Prediction of springback and side-wall curl in 2-D draw bending, Journal of Materials Processing Technology, Vol. 50, pp. 361-374 https://doi.org/10.1016/0924-0136(94)01398-K
- W. D. Carden, L. M. Geng, D. K. Matlock, R. H. Wagnor, 2002, Measurement of springback, International Journal of Mechanical Sciences Vol. 44, pp. 79-101 https://doi.org/10.1016/S0020-7403(01)00082-0
- Luc Papeleux, Jean-Philippe Ponthot, 2002, Finite element simulation of springback in sheet metal forming, Journal of Materials Processing Technology, Vol. 125-126, pp. 785-791 https://doi.org/10.1016/S0924-0136(02)00393-X
- W. Y. Yang, S. Y. Lee, Y. T. Keum, 2003, Initial Blank Design considering Springback Reduction, Transactions of Material Processing, Vol. 12, No.3, pp. 208-213 https://doi.org/10.5228/KSPP.2003.12.3.208
- J. J. Kang, S. K. Hong, H. K. Kim, Y. M. Heo, 2005, The Effect of Segmented Blank Holders on Reducing Asymmetric Springback of Anisotropic Sheet Metal in Shallow-Drawing, Transactions of Material Processing , Vol. 14, No. 4, pp. 392-398 https://doi.org/10.5228/KSPP.2005.14.4.392
- T. Dutton, R. Edwards, A. Blowey, 2005, Spring-back Prediction and Compensation for a High Strength Steel Side Impact Beam, Numisheet 2005, American Institute of Physics, CP778, Volume A, pp. 340-344
Cited by
- Automatic Tool Compensation for an UHSS Automotive Component Using a Compensation Module vol.25, pp.2, 2016, https://doi.org/10.5228/KSTP.25.2.109
- Study on design of progressive dies for manufacture of automobile structural member using DP980 advanced high strength steel vol.30, pp.2, 2016, https://doi.org/10.1007/s12206-016-0140-7
- Modeling the Behavior of Trapped Air in Die Cavity During Sheet Metal Forming vol.20, pp.5, 2011, https://doi.org/10.5228/KSTP.2011.20.5.377
- Compensation Design to Reduce Springback in Sheet Metal Forming of 1.2GPa Ultra High Strength Steel vol.25, pp.5, 2016, https://doi.org/10.5228/KSTP.2016.25.5.301
- Sheet metal forming simulation considering die deformation vol.14, pp.6, 2013, https://doi.org/10.1007/s12239-013-0103-2