References
- 김성렬, 정성교, 이봉열 (2008), "잔류하중을 고려한 장대 PHC 말뚝의 양방향 재하시험 결과분석", 한국 지반공학회 논문집, 24(6), pp.85-93
- 김지환, 김민기, 이준환 (2007), "CPT 결과를 이용한 말뚝지지력 예측법의 평가 및 신뢰성 분석", 대한토목학회 논문집, 27(1C), pp.1-9
- 윤길림 (1997), "CPT를 이용한 말뚝지지력 산정식의 신뢰성", 대한토목학회 논문집, 17(III-1), pp.101-109
- Abu-Farsakh, M.Y. and Titi, H.H. (2004), "Assessment of Direct Cone Penetration Test Methods for Predicting the Ultimate Capacity of Friction Driven Piles", Journal of Geotechnical Engineering, ASCE, Vol.130, GT9, pp.935-944 https://doi.org/10.1061/(ASCE)1090-0241(2004)130:9(935)
- Aoki, N., and De Alencar, D. (1975), "An approximate method to estimate the bearing capacity of piles", Proc., 5th Pan-American Conf. of Soil Mechanics and Foundation Engineering, Buenos Aires, Vol.1, pp.367-376
- Bustamante, M., and Gianeselli, L. (1982), "Pile bearing capacity predictions by means of static penetrometer CPT", Proc., 2nd European Symp. on Penetration Testing, ESOPT-II, Amsterdam, The Netherlands, Vol.2, pp.493-500
- Briaud, J.-L., and Tucker, L. M. (1988), "Measured and predicted axial response of 98 piles", Journal of Geotechnical Engineering, ASCE, 114(9), pp.984-1001 https://doi.org/10.1061/(ASCE)0733-9410(1988)114:9(984)
- Chung, S.G., Giao, P.H., Kim, G.J., and Leroueil, S. (2002), "Geotechnical properties of Pusanclays", Canadian Geotechnical Journal, 39(5), pp.1050-1060 https://doi.org/10.1139/t02-055
- Chung, S.G., Ryu, C.K., Jo, K.Y. and Huh, D.Y. (2005), "Geological and geotechnical characteristics of marine clays at the Busan new port", Marine Georesources and Geotechnology, 23(3), pp. 235-251 https://doi.org/10.1080/10641190500225712
- Chung, S.G., Kim, G.J., Kim, M.S. and Ryu, C.K.(2007), "Undrained shear strength from field vane test on Busan clay", Marine Georesources and Geotechnology, 25(3) pp.167-179 https://doi.org/10.1080/10641190701699350
- Clisby, M. B., Scholtes, R. M., Corey, M. W., Cole, H. A., Teng, P., and Webb, J. D. (1978), "An evaluation of pile bearing capacities", Final Report, Mississippi State Highway Department, Volume 1
- Eslami, A., and Fellenius, B.H. (1997), "Pile capacity by direct CPT and CPTU methods applied to 102 case histories", Canadian Geotechnical Journal, 34(6), pp.886-904 https://doi.org/10.1139/cgj-34-6-886
- Jardine, R.J., Chow, F.C., Overy, R.F., Standing, J.R. (2005), "ICP design methods for driven piles in sands and clays", Thomas Telford, London
- Lehane, B.M., Schneider, J.A., and Xu, X. (2005), "CPT based design of driven piles in sand for offshore structures", UWA Report, GEO: 05345, University of Western Australia, Australia
- Likins, G.E., Rausche, F., Thendean, G. and Svinkin, M. (1996), "CAPWAP Correlation Studies", Proc. of the 5th Int'l Conf. on the Application of Stresswave Theory to Piles, University of Florida, Orlando Florida USA
- Likins, G.E., and Rausche, F. (2004), "Correlation of CAPWAP with Static Load Tests", Proc. of 7th Int'l Conf. on the Application of Stresswave Theory to Piles, Petaling Jaya, Selangor, Malaysia. pp. 153-165
- Long, J. H., and Wysockey, M. H. (1999), "Accuracy of methods for predicting axial capacity of deep foundations", Proc., OTRC '99 Conf.: Analysis, Design, Construction, and Testing of Deep Foundation, GSP No. 88, ASCE, Reston, Va., pp.190-195
- Meyerhof, G. G. (1983), "Scale effects of pile capacity", Journal of Geotechnical Engineering, ASCE, 108(3), pp.195-228
- Philipponnat, G. (1980), "Methode pratique de calcul d'un pieu isole a l'aide du penetrometre statique", Rev. Fr. Geotech., Vol.10, pp.55-64
- Robertson, P.K. and Campanella, R.G. (1988), "Guidelines for Use, Interpretation and Application of the CPT and CPTU", UBC, Soil Mechanics Series No. 105, Civil Eng. Dept., Vancouver, B.C., V6T 1W5, Canada, pp.197
- RockWare Inc. (2006), Rockworks program
- Schmertmann, J.H. (1978), "Guidelines for cone penetration test, performance and design", Report No. FHWA-TS-78-209, US. Department of Transportation, Washington, D.C., pp.145
- Zhou, J., Xie, Y., Zuo, Z.S., Luo, M.Y. and Tang, X.J. (1982), "Prediction of limit load of driven pile by CPT", Proc. of the 2nd European Symp. on Penetration Testing, Amsterdam, The Netherlands, Vol.2, pp.957-961