Cross-sectional TEM Specimen Preparation of GaN-based Thinfilm Materials Using Alumina Dummy Filler

Alumina dummy 충전재를 이용한 GaN 기반 박막재료의 단면 TEM 시편준비

  • Received : 2009.08.14
  • Accepted : 2009.09.14
  • Published : 2009.09.30

Abstract

Practical difficulties for preparing a good crosssectional specimen of GaN-based materials for transmission electron microscopy have arisen due to large difference of mechanical properties between hard ceramic substrate and soft GaN-layered materials. Uneven polishing, sudden cracking, delamination, and selective sputtering during the conventional wedge polishing technique are often encountered as experimental hindrances. The preparation technique based on Strecker's method can be applied to overcome these difficulties, which eventually leads to mechanically stable TEM samples independent of the mechanical properties of materials. The basic idea is to use hard ceramic dummy filler for embedding the sample of interest into the dummy frame. In this study, we applied this technique into preparing cross-sectional TEM specimen of the GaN-based materials with mechanical instability and demonstrated usefulness of this hard dummy filler method in which the possible modifications of the sample of interest during the preparation must be avoidable. In addition, practical precautions during the preparation were discussed.

Keywords

References

  1. Barna $\acute{A}$, P$\acute{e}$cz B, Menyhard M: TEM sample preparation by ion milling/amorphization. Micron 30 : 267-276, 1999 https://doi.org/10.1016/S0968-4328(99)00011-6
  2. Drory MD, Ager III JW, Suski T, Grzegory I, Porowski S: Hardness and fracture toughness of bulk single crystal gallium nitride. Appl Phys Lett 69 : 4044-4046, 1996 https://doi.org/10.1063/1.117865
  3. Eberg E, Monsen ${\AA}$F, Tybell T, van Helvoort ATJ, Holmestad R: Comparison of TEM specimen preparation of perovskite thin films by tripod polishing and conventional ion milling. J Electron Microsc 57 : 175-179, 2008 https://doi.org/10.1093/jmicro/dfn018
  4. Egerton RF, Malac PLM: Radiation damage in the TEM and SEM. Micron 35 : 399-409, 2004 https://doi.org/10.1016/j.micron.2004.02.003
  5. Goodhew PJ: Thin foil preparation for electron microscopy. In:Glauert AM, ed, Practical Methods in Electron Microscopy, Elsevier, New York, 1985
  6. Kim YM, Hong SH, Chung SY, Lee JY, Kim YS, Kim YJ: Practical approaches to minimize specimen charging effect in HRTEM. Abstract book: the 39th Spring Meeting of Korean Microscopy Society (Daegu, May 28-30th), pp. 63-67, 2008
  7. Li J, Malis T, Dionne S: Recent advances in FIB-TEM specimen preparation techniques. Mater Charact 57 : 64-70, 2006 https://doi.org/10.1016/j.matchar.2005.12.007
  8. Mccaffrey JP, Hulse J: Transmitted color and interference fringes for TEM sample preparation of silicon. Micron 29 : 139-144, 1998 https://doi.org/10.1016/S0968-4328(97)00074-7
  9. Nakamura S: GaN growth using GaN buffer layer. Japanese J Appl Phys 30 : L1705-L1707, 1991 https://doi.org/10.1143/JJAP.30.L1705
  10. Newcomb SB, Baxter CS, Bithell EG: The preparation of crosssectional TEM specimens. Inst Phys Conf Ser 93 : 43, 1988
  11. Okuno H, Takeguchi M, Mitsuishi K, Guo XJ, Furuya K: Sample preparation of GaN-based materials on a sapphire substrate for STEM analysis. J Electron Microsc 57 : 1-5, 2008
  12. Strecker A, Salzberger U, Mayer J: Specimen preparation for transmission electron microscopy: Reliable method for cross-sections and brittle materials. Prakt Metallogr 30 : 482-495, 1993
  13. Weaver L: Cross-section TEM sample preparation of multilayer and poorly adhering films. Microsc Res Tech 36 : 368-371, 1997 https://doi.org/10.1002/(SICI)1097-0029(19970301)36:5<368::AID-JEMT4>3.0.CO;2-H
  14. Yonenage I: Hardness of bulk single-crystal GaN and AlN. MRS Internet J. Nitride Semicond Res 7 : 6, 2002 https://doi.org/10.1557/S1092578300000326
  15. Zilan L, Xiaodong H, Ke C, Ruijuan N, Xuhui L, Xiaoping Z, Tongjun Y, Bei Z, Song C, Zhijian Y, Zhizhong C, Guoyi Z: Preparation of GaN-based cross-sectional TEM specimens by laser lift-off. Micron 36 : 281-284, 2005 https://doi.org/10.1016/j.micron.2004.12.001