초록
이 논문에서는 표면으로부터 내부로 진전된 CT피로시험편의 노치 피로균열을 대상으로 회절초음파를 이용하여 균열깊이를 평가하기 위한 방법을 제안하고 그 타당성을 실험에 의해 검증하였다. 특히 균열선단 이외에 노치와 같은 또 다른 회절파 발생요소가 존재하는 상황에서 회절파 성분들을 정확하게 규명하기 위해 탐촉자 스캔에 의한 영상화 및 전파경로 분석을 실시하였다. 실험은 균열이 없는 시험편과 균열이 있는 시험편에 적용하였다. 실험 및 분석의 결과 주파수가 클수록 그리고 탐촉자의 굴절각이 클수록 정확한 측정이 가능했고, 4MHz의 $60^{\circ}-60^{\circ}$ 탐촉자 조합의 경우 오차 0.38 mm 이내로 균열깊이가 측정되었다. 제안 기법은 균열 선단부가 미세하여 회절파 세기가 미약하더라도 적용이 가능하다는 특징을 가지므로 미세 균열의 검사 및 깊이 평가에 활용할 수 있을 것으로 기대된다.
This paper proposed a methodology based on ultrasonic diffraction technique to inspect the depth of a crack initiated from a notch of CT specimen by fatigue test, and its usefulness was verified by experiments. Especially, in order to identify accurately the diffractive waves from the crack tip in the situation where there are extra diffractive elements such as a notch, we have tried imaging by transducer scan and analyzed the propagation path of diffracted wave. Two specimens with and without a crack were experimented. Higher frequency and larger refractive angle of transducer showed a tendency to decrease the error in the measurements, and the measured crack depth showed an error less than 0.38 mm in case of 4 MHz $60^{\circ}-60^{\circ}$. The proposed methodology is applicable to weak diffractive sources, and so that it would be useful to inspect micro cracks and for their depth sizing.