DOI QR코드

DOI QR Code

Transmission and Sensing Characteristics of the Biconically Tapered Cladded Multimode Fibers

  • Kim, Kwang-Taek (Division of Electronic and Photonic Engineering, Honam University) ;
  • Hong, Ki-Bum (Division of Electronic and Photonic Engineering, Honam University) ;
  • Park, Jae-Hee (Department of Electronic Engineering, Keimyung University)
  • Received : 2009.12.19
  • Accepted : 2009.04.20
  • Published : 2009.06.25

Abstract

This paper presents a theoretical and experimental investigation of the transmission and sensing characteristics of the biconically tapered cladded multimode fibers. The beam propagation method was used to examine the transmission characteristics with various structural parameters. The results show that the transmission of the biconically tapered cladded multimode fibers is sensitive to the mode of the input optical beam and the refractive index of the external medium. A refractive index sensor for the external medium was proposed based on the theoretical analysis, and its feasibility was demonstrated experimentally.

Keywords

References

  1. M. Tabib-Azar, B. Sutapun, and R. Petrick, 'Highly sensitive hydrogen sensors using palladium coated fiber optics with exposed cores and evanescent field interactions,' Sensors and Actuators B : Chemical 56, 158-163 (1999) https://doi.org/10.1016/S0925-4005(99)00177-X
  2. D. Luna-Moreno and D. Monzon-Hernandez, 'Effect of the Pd-Au thin film thickness uniformity on the performance of an optical fiber hydrogen sensor,' Applied Surface Science 253, 8615-8619 (2007) https://doi.org/10.1016/j.apsusc.2007.04.059
  3. S. T. Lee, R. D. Kumar, and P. S. Kumar, 'Long period gratings in multimode optical fibers: application in chemical sensing,' Opt. Comm. 224, 237-241 (2003) https://doi.org/10.1016/S0030-4018(03)01597-9
  4. R. Orghici, U. Willer, and M. Gierszewska, 'Fiber optic evanescent field sensor for detection of explosives and CO2 dissolved in water,' Appl. Phys. B : Lasers and optics 90, 355-360 (2008) https://doi.org/10.1007/s00340-008-2932-7
  5. A. G. Mignani, 'Evanescent wave absorption spectroscopy by means of bi-taped multimode optical fiber,' Applied Spectroscopy 52, 546-551 (1998) https://doi.org/10.1366/0003702981943851
  6. S. Guo and S. Albin, 'Transmission property and evanescent wave absorption of cladded multimode fiber tapers,' Opt. Exp. 11, 215-223 (2003) https://doi.org/10.1364/OE.11.000215
  7. Y.-F. Li and J. W. Y. Lit, 'Transmission properties of a multimode optical-fiber taper,' J. Opt. Soc. Am. A 2, 464-468 (1985) https://doi.org/10.1364/JOSAA.2.000462
  8. Y. Yang, J. Lee, K. Reichard, P. Ruffin, F. Liang, D. Ditto, and S. Yin, 'Fabrication and implementation of a multi-to-single mode converter based on a tapered multimode fiber,' Opt. Comm. 249, 129-137 (2005) https://doi.org/10.1016/j.optcom.2005.01.001
  9. G. Keiser, Optical Fiber Communications (McGraw-Hill, USA, 1983), Chapter 2
  10. A. J. Fielding, K. Edinger, and C. C. Davis, 'Experimental observation of mode evolution in single-mode tapered optical fibers,' J. Lightwave Tech. 17, 1649-1656 (1999) https://doi.org/10.1109/50.788571
  11. A. C. Boucouvalas and G. Georgiou, 'Tapering of single -mode optical fibers,' IEE proceedings J, Optoelectronics 133, 385-392 (1986) https://doi.org/10.1049/ip-j.1986.0068
  12. A. Yacoubian, W. Lin, and J. H. Bechtel, 'Fabrication of polymer waveguide tapers to minimize insertion loss,' Proc. SPIE 4490, 22-31 (2001) https://doi.org/10.1117/12.455440
  13. K. T. Kim and K. H. Park, 'Fiber-optic temperature sensor based on single mode fused fiber coupler,' J. Opt. Soc. Korea 12, 152-156 (2008) https://doi.org/10.3807/JOSK.2008.12.3.152

Cited by

  1. Liquid sensors using refractive intensity at the end-face of a glass fiber connected to fiber-Bragg grating vol.158, pp.2, 2010, https://doi.org/10.1016/j.sna.2009.12.039