한국수소및신에너지학회논문집 (Journal of Hydrogen and New Energy)

  • 제20권2호
  • /
  • Pages.168-178
  • /
  • 2009
  • /
  • 1738-7264(pISSN)
  • /
  • 2288-7407(eISSN)
한국수소및신에너지학회 (The Korean Hydrogen and New Energy Society)
권호 표지

회수증진 수성가스화 시스템의 공정구성 및 조업조건 선정

Selection of Process Configuration and Operating Conditions for SEWGS System

  • 류호정 (한국에너지기술연구원 온실가스연구단)
  • Ryu, Ho-Jung (Greenhouse Gas Research Center, Korea Institute of Energy Research)
  • 발행 : 2009.04.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

To check feasibility of SEWGS(Sorption Enhanced Water Gas Shift) system, conceptual design and sensitivity analysis of operating variables have been investigated based on a design program of two-interconnected fluidized bed. Based on the conceptual design results, the optimum configuration for SEWGS was considered. Among three configurations, bubbling beds system was selected as the best configuration. Process design results indicate that the SEWGS system is compact and feasible. Based on the selected operating conditions, the effects of variables such as pressure, $CO_2$ capture capacity, solid inventory, CO conversion and $CO_2$ capture efficiency have been investigated as well.

키워드

참고문헌

  1. H. J. Ryu and G. T. Jin, 'Performance Estimation and Process Selection for Chemical-Looping Hydrogen Generation System', Trans. of the Korean Hydrogen and New Energy Society, Vol. 16, No. 3, 2005, pp. 209-218
  2. IEA report, 'Prospects for Hydrogen and Fuel Cells', IEA Books, 2005, pp. 49-55
  3. Ola Maurstad, 'An Overview of Coal Based Integrated Gasification Combined Cycle (IGCC) Technology', MIT report, Publication No. LFEE 2005-002 WP, 2008, pp. 1-43
  4. 윤왕래 외, '수소 station용 천연가스 수증기개질 수소 제조공급시스템 기술 개발', 연구보고서, KIER-A56401, 2006, p. 15
  5. H. J. Ryu, C. K. Yi, D. Shun, G. T. Jin, 'Conceptual Design and Performance Estinmation of SEWGS Process for Precobustion $CO_2$ Capture', Theories and Applications of Chem. Eng., Vol. 14, No. 2, 2008, p. 293
  6. H. J. Ryu and G. T. Jin, 'Conceptual Design of 50 kW thermal Chemical-Looping Combustor and Analysis of Variables', Energy Engg. J., Vol. 12, No. 4, 2003, pp. 289-301
  7. H. J. Ryu, N. Y. Lim, D. H. Bae and G. T. Jin, 'Minimum Fluidization Velocity and Transition Velocity to Fast Fluidization of Oxygen Carrier Particle for Chemical-Looping Combustor', HWAHAK KONGHAK, Vol. 41, No. 5, 2003, pp. 624-631
  8. G. B. Han, N. K. Park, S. O. Ryu and T. J. Lee, 'The Reactivity for $SO_2$ Reduction with CO and H2 over Sn-Zr Based Catalysts', Korean J. Chem. Eng. Res., Vol. 44, No. 4, 2006, pp. 356-362
  9. C. K. Yi, S. H. Jo, H. S. Kwon, K. B. Kim, H. K. Chae, G. T. Jin, and J. E. Son, 'Continuous Operation of Zinc-Titanate Sorbent for 100 Hours in a Fluidized Hot Gas Desulfurization Process for IGCC', HWAHAK KONGHAK, Vol. 40, No. 2, 2002, pp. 246-251
  10. S. H. Jo, B. H. Lee, J. B. Lee, C. K. Ryu, G. T. Jin and C. K. Yi, 'Multi-cyclic Test of a Air-Regenerated Sorbent in a Pressurized Fluidized Reactor for Hot Gas Desulfurization', HWAHAK KONGHAK, Vol. 40, No. 2, 2002, pp. 231-236
  11. 이창근, 조성호, 류호정, 이승용, 진경태, '건식 Sorbent를 이용한 배가스 $CO_2$ 회수공정 기반기술개발', 제1회 이산화탄소 저감 및 처리기술 Workshop, 2003, pp. 381-389