A Hydraulic-Oil Pump System using SR Drive with a Direct Torque Control Scheme

  • Lee, Dong-Hee (Dept. of Electrical and Mechatronics Engineering, Kyungsung University) ;
  • Kim, Tae-Hyoung (Dept. of Electrical and Mechatronics Engineering, Kyungsung University) ;
  • Ahn, Jin-Woo (Dept. of Electrical and Mechatronics Engineering, Kyungsung University)
  • Published : 2009.05.20

Abstract

The hydraulic-oil pump is widely used for building machinery, brake systems of vehicles and automatic control systems due to its high dynamic force and smooth linear force control performance. This paper presents a novel direct instantaneous pressure control of the hydraulic pump system with SRM drive. The proposed hydraulic pump system embeds the pressure controller and direct instantaneous torque controller. Due to the proportional relationship between pump pressure and torque, pressure can be controlled by the motor torque directly. The proposed direct torque controller can reduce inherent torque ripple of SRM, and develop a smooth torque, which can increase the stability of the hydraulic pump. The proposed hydraulic pump system has also fast step response and load response. The proposed hydraulic pump system is verified by computer simulation and experimental results.

Keywords

References

  1. J. L. Johnson et al, Introduction to Fluid Power, Science & Technology, 2004
  2. Peter Chapple, "Principles of Hydraulic System design," Coxmoor Publishing Company, 2003
  3. Du, Hongliu, "An E/H Displacement and Power Control Design for Hydraulic Variable Displacement Pumps," in the Proceedings of the ASME International Mechanical Engineering Congress and Exposition, New York, NY, Nov. 2001
  4. J. W. Ahn, "Switched Reluctance Motor", Osung Media, 2004
  5. J.F. Gieras, J.H Choi, "Design of High-Speed High Power Switched Reluctance motor," Journal of Power Electronics, Vol. 1, No. 1, pp.19-25, 2001
  6. B.C. Kim, D.H. Lee, J.W. Ahn, "Performance of SR drive for hydraulic pump," Proceedings of ICEMS 2005, Vol.1, pp.659 - 663, 27-29, Sept. 2005
  7. J. Liang, Z. G. Lee, D. H. Lee, J. W. Ahn, "DITC of SRM Drive System Using 4-Level Converter," Proceedings of ICEMS 2006, Vol. 1, pp. 21-23, Nov. 2006
  8. Inderka, R.B., De Doncker, R.W., "DITC-direct instantaneous torque control of switched reluctance drives," 37th IAS Annual Meeting. Vol. 3, pp. 1605 – 1609, Oct. 2002
  9. R. C. Kavanagh, J. M. D. Murphy, and M. G. Egan, "Torque ripple minimization in switched reluctance drives using self-learning techniques," in Proc. IEEE-IECON Conf. Rec.'91, pp. 289-294, 1991
  10. D. S. Schramm, B. W. Williams, and T. C. Green, "Torque ripple reduction of switched reluctance motors by phase current optimal profiling," in Proc. IEEE-PESC Conf. Rec.'92, pp. 857-860, 1992
  11. J. C. Moreira, "Torque ripple minimization in switched reluctance motors via bi-cubic spline interpolation", in Proc. IEEE-PESC Conf. Rec.'92, pp. 851-856, 1992
  12. M.H. Kim, "Direct Torque Control System of a Reluctance Synchronous Motor Using a Neural Network," Journal of Power Electronics, Vol. 5, No. 1, pp.36-44, 2005