참고문헌
- S. Eiamsa and P. Promvonge, "Review of Ranque-Hilsch Effect In Vortex Tube" Renewable & Sustainable Energy Reviews 12, pp.1822-1842, 2008. https://doi.org/10.1016/j.rser.2007.03.006
- R. Hilsch, "The Use of the Expansion of Gases in a Centrifugal Field as Cooling Process" The Review of Scientific Instruments, Vol 18, No. 2, pp.108-113, 1947. https://doi.org/10.1063/1.1740893
- B. Ahlborn and J. Gordon, "The Vortex Tube as a Classic Thermodynamic Refrigeration Cycle" Journal of Applied Physics Vol. 88, No. 6, pp. 3645-3653, 2000. https://doi.org/10.1063/1.1289524
- J. Lewins and A. Bejan, "Vortex Tube Optimization Theory" Energy 24, pp. 931-943, 1999. https://doi.org/10.1016/S0360-5442(99)00039-0
- S. Piralishvili and A. Fuzeeva, "Similarity of the Energy-Separation Process in Vortex Ranque Tube" Journal of Engineering Physics and Thermodynamics, Vol. 79, No. 1, pp. 27-32, 2006. https://doi.org/10.1007/s10891-006-0062-9
- M. Saidi and M. Allaf Yazdi, "Energy Model of a Vortex Tube System with Experimental Reslts" Energy 24, pp.625-632, 1999. https://doi.org/10.1016/S0360-5442(98)00076-0
- B. Ahlborn and S. Groves, "Secondary Flow in a Vortex Tube" Fluid Dynamics Research 21, pp.73-86, 1997. https://doi.org/10.1016/S0169-5983(97)00003-8
- K. Dincer, S. Baskaya, B. Uysal and I. Ucgul, "Experimental Investigation of the Performance of a Ranque-Hilsch Vortex Tube with regard to a Plug Located as the Hot Gas" International Journal of Refrigeration 32, pp.87-94, 2009. https://doi.org/10.1016/j.ijrefrig.2008.06.002
- W. Peng, A. Hoffmann, H. Dries, M. Regelink and L. Stein, "Experimental Study of the Vortex End in Centrifugal Separator: The Nature of the Vortex End" Chemical Engineering Science 60, pp.6919-6928, 2005 https://doi.org/10.1016/j.ces.2005.06.009
- O. Aydin and M. Baki, "An Experimental Study on the Design Paramenters of a Counterflow Vortex Tube" Energy 31, pp.2763-2772, 2006. https://doi.org/10.1016/j.energy.2005.11.017
- X. Li, H. Yan, J. Meng and Z. Li, "Visualization of Longitudinal Vortex Flow in an Enhanced Heat Transfer Tube" Experimental Thermal and Fluid Science 31, pp.601-608, 2007. https://doi.org/10.1016/j.expthermflusci.2006.06.007
- H.M. Skye, G.F. Nellis, S.A. Klein "Comparison of CFD analysis to empirical data in a commercial vortex tube" International Journal of Refrigeration 29, pp.71-80, 2006. https://doi.org/10.1016/j.ijrefrig.2005.05.004
- U. Behera, P.J. Paul, S. Kasthurirengan, R. Karunanithi, S.N. Ram, K. Dinesh, S. Jacob(2005), "CFD analysis and experimental investigations towards optimizing the parameters of Ranque-Hilsch vortex tube" International Journal of Heat and Mass Transfer 48, pp.1961-1973, 2005. https://doi.org/10.1016/j.ijheatmasstransfer.2004.12.046
- S. Eiamsa-ard and P. Promvonge, "Numerical Investigation of the Thermal Separation m a Ranque-Hilsch Vortex Tube" International Journal of Heat and Mass Transfer 50, pp.821-832, 2007. https://doi.org/10.1016/j.ijheatmasstransfer.2006.08.018
- T. Farouk and B. Farouk, "Large Eddy Simulations of the Flow Field and Temperature Separation in the Ranque-Hilsch Vortex Tube" International Journal of Heat and Mass Transfer 50, pp.4724-4735, 2007. https://doi.org/10.1016/j.ijheatmasstransfer.2007.03.048
- NIKA GmbH, "COSMOS-FloWorks User's Manual", 2007.