Abstract
The ISO 18000-7 Active RFID standard, a single channel system operating in the 433Mhz, faces technical difficulties in supporting some recently introduced application demands because of its low transmission rates and radio interference between readers. We propose a new multi-channel active RFID system operating in the 2.4Ghz. The special feature of the proposed system is that a reader makes use of multiple interfaces to improve its performance like a multi-core processor. However if only a small part of interfaces are actually used, the performance improvement would not meet the expectation. To overcome this problem, a new multi-channel multi-interface active RFID protocol, which balances communication loads among all available interfaces, is necessary. 3 protocols, named as "Aggregated", "LP-Combined", "AP-Balanced", are proposed. Through simulation, we compare them for various conditions by changing number of tags, number of interfaces, tag data size. AP-Balanced shows the best performance and its performance increases almost linearly as the number of interface increases, which meets our expectation.
433Mhz에서 단일 채널을 사용하는 ISO 18000-7 능동형 RFID 표준은 낮은 전송 속도, 단일채널에 따른 간섭 문제 등으로 최근의 응용 요구를 충족시키는데 어려움이 있다. 2.4Ghz 대역에서 다수 채널을 사용하는 새로운 능동형 RFID 시스템을 제안한다. 이 시스템은 하나의 리더에 여러 개의 인터페이스를 장착하여 성능을 개선하는 방안이 특징이다. 그런데 다수의 인터페이스를 장착하여도 대부분의 태그들이 특정 인터페이스로 몰린다면 기대하는 성능 개선이 어렵다. 이를 극복하기 위해 인터페이스간 부하 배를 고려한 능동형 RFID 프로토콜이 필요하다. 우리는 단순결합, LP-조합, AP-균형이라는 세 가지 프로토콜을 제안하고 비교, 분석하였다. 태그의 수, 인터페이스 수, 태그의 부가 정보의 양 등을 변화시키면서 수행한 다양한 성능 평가 결과 AP-균형이 가장 우수한 성능을 보였다. AP-균형은 인터페이스 수에 거의 선형적으로 비례하여 성능이 증가하며 기대를 충족하였다.