DOI QR코드

DOI QR Code

흑연표면의 열방사율 측정시 결정립 배향성의 영향

Thermal Emissivity Changes as a Function of Degree of Flakes Alignment on the Graphite Surface

  • 노재승 (금오공과대학교 신소재시스템공학부) ;
  • 안재상 (금오공과대학교 신소재시스템공학부) ;
  • 김범준 (금오공과대학교 신소재시스템공학부) ;
  • 전호연 (금오공과대학교 신소재시스템공학부) ;
  • 서승국 (금오공과대학교 신소재시스템공학부) ;
  • 김석환 (금오공과대학교 신소재시스템공학부) ;
  • 이상우 (금오공과대학교 신소재시스템공학부)
  • Roh, Jae-Seung (School of Advanced Materials and System Engineering, Kumoh National Institute of Technology) ;
  • Ahn, Jai-Sang (School of Advanced Materials and System Engineering, Kumoh National Institute of Technology) ;
  • Kim, Beom-Jun (School of Advanced Materials and System Engineering, Kumoh National Institute of Technology) ;
  • Jeon, Ho-Yeon (School of Advanced Materials and System Engineering, Kumoh National Institute of Technology) ;
  • Seo, Seung-Kuk (School of Advanced Materials and System Engineering, Kumoh National Institute of Technology) ;
  • Kim, Suk-Hwan (School of Advanced Materials and System Engineering, Kumoh National Institute of Technology) ;
  • Lee, Sang-Woo (School of Advanced Materials and System Engineering, Kumoh National Institute of Technology)
  • 발행 : 2009.04.30

초록

This study is the research on the thermal emissivity depending on the bulk graphite's alignment degree. Bulk graphites were manufactured by uni-axial pressing and subsequent heat treatment of natural graphite flakes with organic binder. The samples were prepared to be $0^{\circ}$ (relative to the 002 c-face), $45^{\circ}$, and $90^{\circ}$ (relative to the 100 a-face) for measuring alignment degree. The alignment degree of the sample was measured by XRD. The thermal emissivity was measured by infrared thermal image camera at $100^{\circ}C$ and compared with the value obtained by Infrared spectroscopy. The alignment degree and thermal emissivity of $0^{\circ}$ sample were measured to be 0 and 0.70 respectively. And those of $90^{\circ}$ sample were 0.73 and 0.80 respectively. The emissivity value was correlated with obtained by IR spectroscopy. Therefore it was considered that the thermal emissivity of the bulk graphite is correlated with the alignment degree.

키워드

참고문헌

  1. X. Jack Hu, Matthew A. Panzer, Kenneth E. Goodson, J. Heat Transfer, 129 (2007) 91 https://doi.org/10.1115/1.2401202
  2. S. P. Rawal, D. M. Barnett, D. E. Martin, Advanced Packaging, 22 (1999) 379 https://doi.org/10.1109/6040.784489
  3. Alberto Castellazzia, Martin Honsberg-Riedlb, Gerhard Wachutka, Microelectronics Journal, 37 (2006) 145 https://doi.org/10.1016/j.mejo.2005.02.123
  4. A. Kurumada, T. Oku, K. Harada, K. Kawamata, S. Sato, T. Hiraoka, B. McEaney, Carbon, 35 (1997) 1157 https://doi.org/10.1016/S0008-6223(97)00088-2
  5. Charls T. Lynch, Practical Handbook of Materials Science, CRC press, Florida (1989) 393
  6. Bruce W. Gonser, Modern Materials, Vol. 7, Academic Press, New York (1970) 165
  7. C. Y. Zhao, T. J. Lu, H. P. Hodson, International Journal of Heat and Mass Transfer, 47 (2004) 2927 https://doi.org/10.1016/j.ijheatmasstransfer.2004.03.006
  8. J. Zueco, F. Alhama, Journal of Quantitative Spectroscopy & Radiative Transfer, 101 (2006) 73 https://doi.org/10.1016/j.jqsrt.2005.11.005
  9. M. Ball, H. Pinkerton, A. J. L. Harris, Journal of Volcanology and Geothermal Research, 173 (2008) 148 https://doi.org/10.1016/j.jvolgeores.2008.01.004
  10. L. Gardner, K. T. Ng, Fire Safety Journal, 41 (2006) 185 https://doi.org/10.1016/j.firesaf.2005.11.009
  11. Jian Yi, XiaoDong He, Yue Sun, YaoLi, Applied Surface Science, 253 (2007) 4361 https://doi.org/10.1016/j.apsusc.2006.09.063
  12. S. Bellayer, J. W. Gilman, S. S. Rahatekar, S. Bourbigot, X. Flambard, L. M. Hanssen, H. Guo, S. Kumar, Carbon, 45 (2007) 2417 https://doi.org/10.1016/j.carbon.2007.06.057
  13. K. S. Oh, S. C. Bae, KSME Fall Meeting B (2001) 54
  14. J. S. Roh, Carbon Science, 5 (2004) 27
  15. Bruce W. Gonser, Mordern Materials, Vol. 7, Academic Press, New York (1970) 185
  16. G. W. Autio, E. Scala, Carbon, 4 (1966) 13 https://doi.org/10.1016/0008-6223(66)90005-4
  17. T. J. W. van Thoor, L. W. Codd, K. Dijhoff, J. H. Fearon, C. J. van Oss, H. G. Roebersen, E. G. Stanford, Materials and Technology, Vol. 2, Longman and J. H. Debusy, London (1971) 424
  18. G. W. Autio, E. Scala, Carbon, 6 (1968) 41 https://doi.org/10.1016/0008-6223(68)90049-3

피인용 문헌

  1. The Preparation and Property of Carbon Foams from Carbon Black Embedded Pitch Using PU Template vol.54, pp.2, 2016, https://doi.org/10.9713/kcer.2016.54.2.268
  2. Investigation of the effects of graphite flake alignment on thermal emissivity by applying a magnetic field during coating of an aluminum sheet vol.40, pp.7, 2014, https://doi.org/10.1007/s11164-014-1652-3
  3. Characteristics of Thermal Radiation Pastes Containing Graphite and Carbon Nanotube vol.49, pp.2, 2016, https://doi.org/10.5695/JKISE.2016.49.2.218