References
- S. Kawamura, J. Sakurai, M. Nakano, and M. Takagi “Recrystallization of Si on amorphous substrates by doughnut-shaped cw Ar laser beam”, Appl. Phys. Lett. 40, pp394, 1982. https://doi.org/10.1063/1.93114
- J. Hinze, and K. Ellmer, “In situ measurement of mechanical stress in polycrystalline zinc-oxide thin films prepared by magnetron sputtering”, J. Appl. Phys., 88, pp.2443, 2000. https://doi.org/10.1063/1.1288162
- G.A. Hirata, J. McKittrick, T. Cheeks, J.M. Siqueiros, J.A. Diaz, O. Contreras and O.A. Lopez, “Synthesis and optoelectronic characterization of gallium doped zinc oxide transparent electrodes”, Thin Solid Films , 288, pp 29, 1996. https://doi.org/10.1016/S0040-6090(96)08862-1
- T. Sasabayashi, N. Ito, E. Nishimura, M. Kon, P. K. Song, K. Utsumi, A. Kaijo, and Y. Shigesato, “Comparative study on structure and internal stress in tindoped indium oxide and indium-zinc oxide films deposited by r.f. magnetron sputtering,” Thin Solid Films, 445, pp.219, 2003. https://doi.org/10.1016/j.tsf.2003.08.047
-
T. Moriga, M. Mikawa, Y. Sakakibara, Y. Misaki, K.
I. Murai, I. Nakabayashi, K. Tominaga, and J. B.
Metson, “Effects of introduction of argon on structural
and transparent conducting properties of ZnO–
$In_2O_3$ thin films prepared by pulsed laser deposition”, Thin Solid Films, 486, pp53, 2005. https://doi.org/10.1016/j.tsf.2004.11.241 - F. K. Shan and Y. S. Yu, “Band gap energy of pure and Al-doped ZnO thin films”, J. European Ceram. Soc., 24, pp1869, 2004. https://doi.org/10.1016/S0955-2219(03)00490-4
- J. Hu and R. G. Gordon, “Textured aluminum-doped zinc oxide thin films from atmospheric pressure chemical-vapor deposition”, J. Appl. Phys., 71, pp880, 1992. https://doi.org/10.1063/1.351309
- X. Jiang, F. L. Wong, M. K. Fung, and S. T. Lee, “Aluminum-doped zinc oxide films as transparent conductive electrode for organic light-emitting devices”, Appl. Phys. Lett., 83, pp1875, 2002..
- Y. Choi, “Growth and Preferred Orientation of ITO Thin Film Deposited by D.C. Magnetron Sputtering”, J. Kor. Inst. Met. & Mater., 45, pp. 559-586, 2007.
- J. H. Heo, D. S. Han, Y. L. Lee, K. M. Lee, and I. W. Kim, “Electrical and structural characteristics of ITO thin films deposited under different ambient gases,” J. Semi. & Disp. Equip. Tech., 7, pp7, 2008.
- K. H. Yoon, J. W. Choi, D.H. Lee, “Characteristics of ZnO thin films deposited onto Al/Si substrates by r.f. magnetron sputtering,” Thin Solid Films, 302, pp. 116, 1997. https://doi.org/10.1016/S0040-6090(96)09568-5
- S. S. Lin, J. L. Huang, P. Sajgalik, “Effects of substrate temperature on the properties of heavily Al-doped ZnO films by simultaneous r.f. and d.c. magnetron sputtering,” Surf. and Coat. Tech., 190, pp. 39, 2005. https://doi.org/10.1016/j.surfcoat.2004.03.022
- Van de Walle CG., “Hydrogen as a cause of doping in zinc oxide,” Phys Rev Lett., 85, pp. 1012, 2000. https://doi.org/10.1103/PhysRevLett.85.1012
- Y. Morinaga, K. Sakuragi, N. Fujimura, and T. Ito, “Effect of Ce doping on the growth of ZnO thin films,” J. Cryst. Growth, 174, pp. 691, 1997. https://doi.org/10.1016/S0022-0248(97)00045-6