Nuclear Engineering and Technology

Korean Nuclear Society (한국원자력학회)
권호 표지
DOI QR코드

DOI QR Code

FREE VIBRATION ANALYSIS OF CIRCULAR PLATE WITH ECCENTRIC HOLE SUBMERGED IN FLUID

  • Jhung, Myung-Jo (Safety Research Division, Korea Institute of Nuclear Safety) ;
  • Choi, Young-Hwan (Safety Research Division, Korea Institute of Nuclear Safety) ;
  • Ryu, Yong-Ho (Safety Research Division, Korea Institute of Nuclear Safety)
  • Published : 2009.04.30
Download PDF
⟨ Previous Next ⟩

Abstract

Circular plates with holes are extensively used in mechanical components. The existence of a hole in a circular plate results in a significant change in the natural frequencies and mode shapes of the structure. Especially if the hole is located eccentrically, the vibration behavior of these structures is expected to deviate significantly from that of a plate with a concentric hole. In addition, if the plate is in contact with or submerged in fluid, the situation is more complex. Therefore, in this study, an analytical method to determine the modal characteristics of a plate submerged in fluid is developed based on the finite Fourier-Bessel series expansion and Rayleigh-Ritz method and is verified by the finite element analysis using a commercial program. Also, the relationship between parameter variations and vibration modes is investigated. These results can be used as guidance for the modal analysis and damage detection of a circular plate with a hole.

Keywords

References

  1. So, J. and Leissa, A.W., “Three-dimensional vibrations of thick circular and annular plates,” Journal of Sound and Vibration, Vol.209, pp.15-41, (1998) https://doi.org/10.1006/jsvi.1997.1228
  2. Liu, C.F. and Lee, Y.T., “Finite element analysis of threedimensional vibrations of thick circular and annular plates,” Journal of Sound and Vibration, Vol.233, pp.63-80, (2000) https://doi.org/10.1006/jsvi.1999.2791
  3. Wong, W.O., Yam, L.H., Li, Y.Y., Law, L.Y. and Chan, K.T., “Vibration analysis of annular plates using mode subtraction method,” Journal of Sound and Vibration, Vol.232, pp.807-822, (2000) https://doi.org/10.1006/jsvi.1999.2787
  4. Jhung, M.J., Choi, Y.H. and Kim, H.J., Jeong, K.H., “Natural vibration characteristics of a clamped circular plate in contact with fluid,” Structural Engineering and Mechanics, Vol.21, No.2, pp.169-184, (2005) https://doi.org/10.12989/sem.2005.21.2.169
  5. Bauer, H.F., “Coupled frequencies of a liquid in a circular cylindrical container with elastic liquid surface cover,” Journal of Sound and Vibration, Vol.180, pp.689-704, (1995) https://doi.org/10.1006/jsvi.1995.0109
  6. ANSYS, 2005, ANSYS Structural Analysis Guide, ANSYS, Inc., Houston
  7. Grimes, R.G., Lewis, J.G. and Simon, H.D., “A Shifted Block Lanczos Algorithm for Solving Sparse Symmetric Generalized Eigenproblems,” SIAM Journal on Matrix Analysis and Applications, Vol.15, No.1, pp.228-272, (1994) https://doi.org/10.1137/S0895479888151111
  8. Jeong, K.H. and Kim, K.J., “Free vibration of a circular cylindrical shell coupled with bounded compressible fluid,” Journal of Sound and Vibration, Vol.217, No.2, pp.197- 221, (1998) https://doi.org/10.1006/jsvi.1998.1741
  9. Jhung, M.J. and Jo, J.C., “Equivalent material properties of perforated plate with triangular or square penetration pattern for dynamic analysis,” Nuclear Engineering and Technology, Vol.38, No.7, pp.689-696, (2006)
  10. Jhung, M.J., Jeong, K.H. and Hwang, W.G., “Modal analysis of eccentric shells with fluid-filled annulus,” Structural Engineering and Mechanics, Vol.14, No.1, pp.1-20, (2002) https://doi.org/10.12989/sem.2002.14.1.001

Cited by

  1. Free vibration studies on plates with central cut-out pp.1869-5590, 2018, https://doi.org/10.1007/s13272-018-0339-7
  2. Enhancement of low cycle vibration induced fatigue life of composite beam having central hole using CNT reinforcement: An experimental study pp.1537-6532, 2020, https://doi.org/10.1080/15376494.2018.1541489