Mechanical Properties of Hwangtoh-Based Alkali-Activated Concrete

  • Yang, Keun-Hyeok (Department of Architecture Engineering, Mokpo National University) ;
  • Hwang, Hey-Zoo (Department of Architecture, Mokpo National University) ;
  • Lee, Seol (Department of Architecture Engineering, Mokpo National University)
  • 투고 : 2009.02.06
  • 발행 : 2009.06.30

초록

This study presents the testing of 15 hwangtoh-based cementless concrete mixes to explore the significance and limitations of the development of eco-friendly concrete without carbon dioxide emissions while maintaining various beneficial effects. Hwangtoh, which is a kind of kaolin, was incorporated with inorganic materials, such as calcium hydroxide, to produce a cement-less binder. The main variables investigated were the water-to-binder ratio and fine aggregate-to-total aggregate ratio to ascertain the reliable mixing design of hwangtoh-based cementless concrete. The variation of slump with elapsed time was recorded in fresh concrete specimens. Mechanical properties of hardened concrete were also measured: including compressive strength gain, splitting tensile strength, moduli of rupture and elasticity, stress-strain relationship, and bond resistance. In addition, mechanical properties of hwangtoh-based cement-less concrete were compared with those of ordinary portland cement (OPC) concrete and predictions obtained from the design equations specified in ACI 318-05 and CEB-FIP for OPC concrete, wherever possible. Test results show that the mechanical properties of hwangtoh-based concrete were significantly influenced by the water-to-binder ratio and to less extend by fine aggregate-to-total aggregate ratio. The moduli of rupture and elasticity of hwangtoh-based concrete were generally lower than those of OPC concrete. In addition, the stress-strain and bond stress-slip relationships measured from hwangtoh-based concrete showed little agreement with the design model specified in CEB-FIP. However, the measured moduli of rupture and elasticity, and bond strength were higher than those given in ACI 318-05 and CEB-FIP. Overall, the test results suggest that the hwangtoh-based concrete shows highly effective performance and great potential as an environmental-friendly building material.

키워드

참고문헌

  1. Malhotra V. M (2002) "Introduction: sustainable development and concrete technology." Concrete International, 24(7): 1-22
  2. Wang S. D., Pu X. C., Scrivener K. L. and Pratt P. L. (1995) "Alkali-activated slag cement and concrete: a review of properties and problems." Advances in Cement Research, 27: 93-102
  3. Xu H. and van Deventer J. S. J. (2000) "The geopolymerisation of alumino-silicate minerals." International Journal of Mineral Processing, 59: 247-266 https://doi.org/10.1016/S0301-7516(99)00074-5
  4. Pacheco-Torgal F., Castro-Gomes J. and Jalali S. (2007) "Alkali-activated binders; A review: Part 2 About materials and binder manufacture." Construction and Building Materials https://doi.org/10.1016/j.conbuildmat.2007.03.019
  5. De Silva P., Sagoe-Crenstil K. and Sirivivatnanon V. (2007) "Kinetics of geopolymerization: Role of Al2O3 and SiO2." Cement and Concrete Research, 37: 512-518 https://doi.org/10.1016/j.cemconres.2007.01.003
  6. Xu H. and van Deventer J. S. J. (200) "Geopolymerisaton of multiple minerals." Minerals Engineering, 15: 1131-1139 https://doi.org/10.1016/S0892-6875(02)00255-8
  7. Shi C. and Day R. L. (2001) "Comparison of different methods for enhancing reactivity of pozzolans." Cement and Concrete Research, 31: 813-818 https://doi.org/10.1016/S0008-8846(01)00481-1
  8. Yang K. H., Hwang H. Z., Kim S. Y. and Song J. G. (2007) "Development of a cementless mortar using hwangtoh binder." Building and Environment, 42(10): 3717-3725 https://doi.org/10.1016/j.buildenv.2006.09.006
  9. Hwang H. Z. (1997) "A study on the method activating kaolin and mortar & concrete mixed with active kaolin." Ph. D. Thesis, Seoul National University
  10. Choi H. Y., Hwang H. Z., Kim M. M. and Kim M. M. (2006) "A study on the development of hwangtoh admixture for the application of cement mortar." Journal of the Korean Architecture Institute, 16( 6): 95-102
  11. ACI Committee 318 (2005) "Building Code Requirements for Structural Concrete (ACI 318-05) and Commentary (ACI 318R-05)", American Concrete Institute
  12. CEB-FIP (1999) "Structural Concrete : Testbook on behaviour, Design and Performance", FIB, Switzerland
  13. Neville A. M. (1995) "Properties of concrete", Longman
  14. Korean Standards Information Center. (2006) "Korean industrial standard: Testing Concrete: KS F 2402-KS F 2414", South Korea
  15. MacGregor J. G. and Wight J. K. (2005) "Reinforced concrete: Mechanics and design", Prentice-Hall Inc
  16. ACI 209R-92. (1994) "Prediction of creep shrinkage, and temperature effects in concrete structures." ACI Manual of Concrete Practice Part 1: Materials and general properties of concrete
  17. SPSS Inc. (2004) "SPSS 13.0: Regression Models", Prentice Hall, USA
  18. Oluokun F. A. (1991) "Prediction of concrete tensile strength from compressive strength: evaluation of existing relations for normal weight concrete." ACI Materials Journal, 83( 2): 302-309