Progress in Superconductivity

The Korean Superconductivity Society (한국초전도학회)
권호 표지

Fabrication of BSCCO Superconductor Tube for Current Lead Application

전류인입선 응용을 위한 BSCCO 초전도 튜브의 제조

  • Choi, Jung-Suk (Neutron Science Division, Korea Atomic Energy Research Institute) ;
  • Jun, Byung-Hyuk (Neutron Science Division, Korea Atomic Energy Research Institute) ;
  • Hyun, Ok-Bae (Advanced Technology Center, Korea Electric Power Research Institute) ;
  • Kim, Chan-Joong (Neutron Science Division, Korea Atomic Energy Research Institute)
  • Published : 2009.04.30
Download PDF
⟨ Previous Next ⟩

Abstract

$Bi_2Sr_2Ca_1Cu_2O_x$(BSCCO 2212) superconductors for current lead were fabricated by centrifugal melting process(CMP). BSCCO 2212 powder was melted at $1200^{\circ}\C$ in a resistance furnace using a Pt crucible and poured in a rotating cylindrical mold preheated at $550^{\circ}\C$ for 2 hour. The solidified BSCCO-2212 samples were heat-treated by partial melting process in oxygen atmosphere. The current-voltage curves at 77 K of the samples were obtained by transport measurement, and the microstructure was investigated by scanning electron microscope. The $J_c$ values at 77 K of the tubes partially melted at $840^{\circ}C,\;860^{\circ}C\;and\;880^{\circ}C$ were 492, 430 and 398 $A/cm^2$, respectively. It was observed that the plate-like grains in BSCCO 2212 tube was more developed in the sample heat-treated at $840^{\circ}C$. It was found that the critical current of the BSCCO 2212 samples was dependent on the partial melting schedule regarding the grain shape and size of the BSCCO 2212.

Keywords

References

  1. Xuefeng Sun, Wenbin Wu, Liangbin Wang, GuienZhou, Xiao-Guang Li, Yuheng Zhang,“Superconductivity and structure of $Bi_2Sr_2Ca_1Cu_2O_y$Single crystals with various oxygen content”, Physica C, 282-287, 839-840 (1997) https://doi.org/10.1016/S0921-4534(97)00481-4
  2. Michiharu Ichikawa and Masayuki Okazaki, “AMagnetic Shielding Type Superconducting FaultCurrent Limiter using a Bi2212 Thick Film Cylinder”,IEEE Trans. Appl. Supercon., Vol. 5, No. 2, 1067-1070(1995) https://doi.org/10.1109/77.402736
  3. S. Elschner, F. Breuer, M. Noe, A. Wolf, J.Bock,“Qualification of MCP BSCCO 2212 bulk material foruse in resistive current limiters”, Physica C , 372-376,1668-1672 (2002) https://doi.org/10.1016/S0921-4534(02)01098-5
  4. E. Cecchetti, P. J. Ferreira, J. B. Bander Sande, “Theinfluence of elevated magnetic fields on the textureformation of melt-processed Bi-2212”, Physica C, 336,192-198 (2000) https://doi.org/10.1016/S0921-4534(00)00283-5
  5. J. bock, H. Bestgen, S. Elschner, and E. Preisler,“Large Shaped Parts of Melt Cast BSCCO forApplications in Electrical Engineering”, IEEE Trans. Appl. Supercon., 3[1] 1659-62 (1993) https://doi.org/10.1109/77.233913
  6. S. Stassen, A. Vanderschueren, R. Cloots, A. rulmont,M. Ausloos, “Texturation of Bi-based 2212superconducting bulk ceramics”, Journal of Crystal Growth, 166, 281-285 (1996) https://doi.org/10.1016/0022-0248(96)00129-7