소성∙가공 (Transactions of Materials Processing)

  • 제18권2호
  • /
  • Pages.135-143
  • /
  • 2009
  • /
  • 1225-696X(pISSN)
  • /
  • 2287-6359(eISSN)
한국소성∙가공학회 (The Korean Society for Technology of Plasticity and materials processing)
권호 표지
DOI QR코드

DOI QR Code

모델러와 CAE 를 활용한 최적 금형 방안 설계 기술 개발

The Development of the Optimum Mould Design System by Utilizing Simulation and Modeler

  • 임채호 (한국생산기술연구원 사이버설계지원) ;
  • 곽시영 (한국생산기술연구원 사이버설계지원센터) ;
  • 조인성 (한국생산기술연구원 사이버설계지원센터) ;
  • 황호영 (한국생산기술연구원 사이버설계지원센터)
  • 발행 : 2009.04.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In the casting industry field, a lot of researches have been carried out to maximize soundness and productivity and improve quality of mass produced products. The researches on the optimum mould design by using computer simulation have achieved a lot of accomplishments in the die-casting process especially. Their results are utilized to mass-produce sound products in their field. But there are some difficulties to use the simulation in order to make the design of product and mould. In general, repetitive calculations of computer simulation require much analyzing time in order to make sound design of them. Another difficulty is that only expertise technicians can analyze results of the simulation. In order to solve such a problem, we are building mould design optimization system which consists of knowledge-based module, simulation, optimization module and interactive modeler(it is based on the commercial modeler). By using and interacting between these modules of that system, we can easily make an optimum design of mould and construct the database. This study introduce the general process of the system and connection method between the modules is mentioned above and some examples to apply it to real product.

키워드

참고문헌

  1. C. H. Lim, Y. C. Lee, J. K. Choi, 2004, Intelligent expert system for casting design using simulation and optimization, WFC66, Sept., Istanbul Turkey
  2. C. H. Lim, Y. C. Lee, J. K. Choi, 2005, Int. J. Cast. Met. Res., Vol. 18, pp. 195-201 https://doi.org/10.1179/136404605225022937
  3. K. H. Lee, B. S. Kang, J. S. Park, G. J. Park, 2003, Finite element in analysis and design, Vol. 40, pp. 121-135 https://doi.org/10.1016/S0168-874X(03)00095-7
  4. C. H. Lim, Y. C. Lee, J. K. Choi, 2006, Int. J. Cast. Met. Res., Vol. 4, pp. 259-264
  5. Jasbir S. Arora, Introduction to optimum design: McGRAW-HILL
  6. J. C. Sturm, 2004, Optimisation integration casting property prediction, WFC66, Sept., Istanbul Turkey
  7. C. H. Lim, I. S. Cho, S. Y. Yoo, J. K. Choi, June 2006, Intelligent riser/chill/gating design system using simulations and discrete optimization algorithm, WFC67, UK., p. 173
  8. C. H. Lim, I. S. Cho, S. Y. Yoo, J. K. Choi, 2007, The construction of the casting expert system based on the database by utilizing simulation and modeler, MCSP7, Dailen, China, pp. 361-370
  9. J. S. Arora, M. W. Huang, 1994, Structural Optimization, Vol. 8, pp. 69-85 https://doi.org/10.1007/BF01743302
  10. M. W. Huang, J. S. Arora, 1997, Int. J. for Numerical Method Eng., Vol. 40, pp. 165-188 https://doi.org/10.1002/(SICI)1097-0207(19970115)40:1<165::AID-NME60>3.0.CO;2-I
  11. P. B.Thaneda, G. N. Vanderplaats, 1994, J. of Structural Eng., Vol. 121, pp. 301-306 https://doi.org/10.1061/(ASCE)0733-9445(1995)121:2(301)
  12. J. W. Yi, 2004, A sequential Algorithm using OA in discrete space, PhD. Thesis, Hangyang Univ. Korea
  13. J. W. Yi, J. S. Park, K. H. Lee, G. J. Park, 2001, Trans. oft he KSME, Vol. 25, pp. 1651-1656
  14. J. W. Yi, G. J. Park, 2004, Trans. of the KSME(A), Vol.28, pp. 1399-1407
  15. D. T. Pham, D. Karaboga, 1997, Intelligent optimization techniques, Springer-Verlag, NewYork
  16. I. H. Osman, J. P. Kelly, Meta-Heuristics, Kluwer Academic Publishers, Boston
  17. M. Gen, R. Cheng, 2000, Genetic Algorithm and Engineering Optimization, John-Wiley & Sons Inc., NewYork
  18. R. M. McDavid, J. A. Dantzig, 1998, Int. J. for Numerical Method in fluid, Vol. 28. pp. 419-442 https://doi.org/10.1002/(SICI)1097-0363(19980915)28:3<419::AID-FLD721>3.0.CO;2-4
  19. N. Hofinann, S. Olive, G. Laschet, F. Hediger, J. Wolf, P. R. Sahm, 1997, Modeling and Simulation in Material Science and Engineering 5, Vol. 1, pp. 22-34 https://doi.org/10.1088/0965-0393/5/1/002