영상증폭관을 위한 고전압 전원장치 개발

Development of High Voltage Power Supply for Image Intensifier Tube

  • 발행 : 2009.04.20

초록

본 논문에서는 영상증폭관 (image intensifier tube) 구동을 위한 초소형 경량의 고전압 전원장치의 개발에 대하여 기술하였다. 영상증폭관은 미세한 빛을 증폭하여 야간에도 물체를 식별할 수 있도록 하며, 휴대용 야간 투시경에 사용된다. 영상증폭관을 구동하기 위해서는 배터리 전원을 승압하여, 작은 사이즈에서 수천 볼트의 고전압을 발생하는 전원장치가 필요하다. 본 논문에서는 이를 위한 고전압 전원장치의 설계와 제작에 대해 설명하였으며, 시작품에 대한 실험을 통하여 성능을 검증하였다.

This paper describes the development of a miniature high voltage power supply for driving an image intensifier tube (IIT). The IIT is used for portable night vision devices to observe an object in the dark. A small-sized high voltage power supply generating thousands volts from the battery power source is needed to drive the IIT. This paper presents the design and implementation of the high voltage power supply for the IIT. The experimental results are provided to verify the operation of the developed power supply.

키워드

참고문헌

  1. 홍석민. (2006). 전자광학 영상센서. 물리학과 첨단기술 1/2월호. 11-18
  2. Photonics. Introduction to Image Intensifier Tubes
  3. MIL-P-49452, Military Specification, Power Supply, 18mm Microcharmel wafer, Gen III, 1989
  4. VMI. Multipliers Design Guide section 13. pp. 213-294
  5. C. T. McLyman. (1988). Transformer and Inductor Design Handbook. Marcel Dekker
  6. MAGNETICS. Power Design section 4
  7. P. M. Lin and L. O. Chua, 'Topological generation and analysis of voltage multiplier circuits', IEEE Trans. Circuit and systems, Vol. 24, No. 10, pp. 517-530, 1977 https://doi.org/10.1109/TCS.1977.1084273
  8. F. Belloni, P. Maranesi, and M. Riva, 'Parameters optimization for improved dynamics of voltage multipliers for space', Conf. Rec. IEEE PESC 2004, pp. 439-443, 2004