DOI QR코드

DOI QR Code

참깨 탈립 작업기계 개발에 관한 연구(II) - 건조대 제작 및 성능평가 -

Development of Shattering Machine for Sesame (II) - Manufacture and Performance Evaluation of Drying Stand for Sesame -

  • Lee, Jong-Su (Dept. of Gas Safety Engineering, Kundong University) ;
  • Kim, Ki-Bok (Korea Research Institute of Standards and Science)
  • 발행 : 2009.12.25

초록

Since the sesame pod gets open gradually from the lower to upper parts of the stem due to its different maturity during cutting and binding of sesame, at the conventional work for shattering, the procedures of drying and shattering are repeated two or three times. Therefore, in this study, a drying stand with transparent plastic cover was developed to complete the drying and shattering at the same time. Owing to the developed drying stand, simple drying work, the area for drying was reduced prevention of sesame seeds from loss and rain are available. The performance of developed drying stand was evaluated. Before the drying stand was developed, the conventional method and shattering machine for shattering sesame required at least three times of operation for complete shattering. But After drying stand was developed, the complete shattering works was possible with only one time shattering operation. Finally, the developed drying stand could prevent approximately 5% of the total sesame seed production from loss during drying and shattering works.

키워드

참고문헌

  1. Ahn, B. E. 2000. The Science of Sesame. pp. 3-18. Hanlim Publisher, Seoul, Korea
  2. Cho, E. G. 2008. The Research of Korean Traditional Food. pp. 301-304. Sungshin Women's University, Seoul, Korea
  3. Hwang, D. J. 2008. Studies on the mechanized transplanting and harvest techniques of sesame. Report of National Institute of Crop Science. pp. 576-580. (In Korean)
  4. Kang, C. H. 1997. Integrated mechanization system on polyethylene film mulching culture in sesame. Journal of Crop Science 42(5):489-496. (In Korean)
  5. Lee, J. S. and K. K. Kim 2007. Development of shattering machine for sesame (I) - Design and Fabrication of prototype machine -. Journal of Biosystems Engineering 32(5):301-308. (In Korean) https://doi.org/10.5307/JBE.2007.32.5.301
  6. Lee, S. H. 1990. Sesame Thresher. Patent No.0169293. Korean Intellectual Property Office

피인용 문헌

  1. Development of Threshing Machine for Shatter-Resistant Sesame vol.40, pp.2, 2015, https://doi.org/10.5307/JBE.2015.40.2.110
  2. Separation Characteristic of Shatter Resistant Sesame After Threshing vol.39, pp.4, 2014, https://doi.org/10.5307/JBE.2014.39.4.299