Computers and Concrete

  • 제6권6호
  • /
  • Pages.451-472
  • /
  • 2009
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Flexural ductility of prestressed concrete beams with unbonded tendons

  • Au, F.T.K. (Department of Civil Engineering, The University of Hong Kong) ;
  • Chan, K.H.E. (Department of Civil Engineering, The University of Hong Kong) ;
  • Kwan, A.K.H. (Department of Civil Engineering, The University of Hong Kong) ;
  • Du, J.S. (School of Civil Engineering, Beijing Jiao Tong University)
  • 투고 : 2008.05.06
  • 심사 : 2009.09.14
  • 발행 : 2009.12.25
⟨ 이전 논문 다음 논문 ⟩

초록

Based on a numerical method to analyse the full-range behaviour of prestressed concrete beams with unbonded tendons, parametric studies are carried out to investigate the influence of 11 parameters on the curvature ductility of unbonded prestressed concrete (UPC) beams. It is found that, among various parameters studied, the depth to prestressing tendons, depth to non-prestressed tension steel, partial prestressing ratio, yield strength of non-prestressed tension steel and concrete compressive strength have substantial effects on the curvature ductility. Although the curvature ductility of UPC beams is affected by a large number of factors, rather simple equations can be formulated for reasonably accurate estimation of curvature ductility. Conversion factors are introduced to cope with the difference in partial safety factors, shapes of equivalent stress blocks and the equations to predict the ultimate tendon stress in BS8110, EC2 and ACI318. The same equations can also be used to provide conservative estimates of ductility of UPC beams with compression steel.

키워드

참고문헌

  1. ACI Committee 318 (2005), Building Code Requirements for Reinforced Concrete (ACI 318-05) and Commentary (ACI 318R-05), American Concrete Institute, Farmington Hills, MI, USA.
  2. Allouche, E.N., Campbell, T.I., Green, M.F. and Soudki, K.A (1998), "Tendon stress in continuous unbonded prestressed concrete members - Part 1: review of literature", PCI J., 43(6), 86-93. https://doi.org/10.15554/pcij.11011998.86.93
  3. Attard, M.M. and Setunge, S. (1996), "The stress-strain relationship of confined and unconfined concrete", ACI Mater. J., 93(5), 432-442.
  4. Au, F.T.K. and Du, J.S. (2004), "Partially prestressed concrete", Prog. Struct. Eng. Mater., 6(2), 127-135. https://doi.org/10.1002/pse.168
  5. Au, F.T.K., Su, R.K.L., Tso, K. and Chan K.H.E. (2008), "Behaviour of partially prestressed concrete beams with external tendons", Mag. Concrete Res., 60(6), 455-467. https://doi.org/10.1680/macr.2008.60.6.455
  6. Bahn, B.T. and Hsu, C.T. (1998), "Stress-strain behavior of concrete under cyclic loading", ACI Mater. J., 95(2), 178-193.
  7. British Standards Institution (1997), BS8110: Part 1: Structural Use of Concrete: Code of Practice for Design and Construction, BSI, London, UK.
  8. Du, J.S. and Au, F.T.K. (2009), "Estimation of ultimate stress in external FRP tendons", Proceedings of the Institution of Civil Engineers-Structures and Buildings, 162(4), 213-220.
  9. Du, J.S., Au, F.T.K., Cheung, Y.K. and Kwan, A.K.H. (2008), "Ductility analysis of prestressed concrete beams with unbounded tendons", Eng. Struct., 30(1), 13-21. https://doi.org/10.1016/j.engstruct.2007.02.015
  10. Du, G.C. and Tao, X.K. (1985), "Ultimate stress of unbounded tendons in partially prestressed concrete beams", PCI J., 30(6), 72-91. https://doi.org/10.15554/pcij.11011985.72.91
  11. European Committee for Standardisation (2004), Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules for buildings, European Committee for Standardisation, Brussels, Belgium.
  12. Harajli, M.H. (1990), "Effect of span-depth ratio on the ultimate steel stress in unbonded prestressed concrete members", ACI Struct. J., 87(3), 305-312.
  13. Harajli, M., Khairallah, N. and Nassif, H. (1999), "Externally prestressed members: evaluation of second-order effects", J. Struct. Eng-ASCE, 125(10), 1151-1161. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:10(1151)
  14. Ho, J.C.M., Kwan, A.K.H. and Pam, H.J. (2002), "Ultimate concrete strain and equivalent rectangular stress block for design of high-strength concrete beams", Struct. Eng., 80(16), 26-32.
  15. Jo, B.W., Tae, G.H. and Kwon, B.Y. (2004), "Ductility evaluation of prestressed concrete beams with CFRP tendons", J. Reinf. Plast. Comp., 23(8), 843-859. https://doi.org/10.1177/0731684404033492
  16. Lin, T.Y. and Burns, N.H. (1981), Design of Prestressed Concrete Structures, 3rd Edition, John Wiley & Sons, New York, USA.
  17. Mattock, A.H. (1967), "Discussion of 'rotational capacity of concrete beams' by Corley W", J. Struct. Div. 93(2), 519-522.
  18. Menegotto, M. and Pinto, P.E. (1973), "Method of analysis for cyclically loaded R.C. plane frames, including changes in geometry and non-elastic behaviour or elements under combined normal force and bending", IABSE Preliminary Report for Symposium on Resistance and Ultimate Deformability of Structures Acted on by Well-Defined Repeated Loads, 15-22.
  19. Naaman, A.E. (1985), "Partially prestressed concrete: review and recommendations", PCI J., 30(6), 31-71.
  20. Naaman, A.E. and Alkhairi, F.M. (1991), "Stress at unbonded post-tensioned tendons: Part 1 - evaluation of the state-of-the-art", ACI Struct. J., 88(5), 641-651.
  21. Naaman, A.E., Harajli, M.H. and Wight, J.K. (1986), "Analysis of ductility in partially prestressed concrete flexural members", PCI J., 31(3), 64-87. https://doi.org/10.15554/pcij.05011986.64.87
  22. Ozkul, O., Nassif, H., Tanchan, P. and Harajli, M. (2008), "Rational approach for predicting stress in beams with unbonded tendons", ACI Struct. J., 105(3), 338-347.
  23. Park, R. and Paulay, T. (1975), Reinforced Concrete Structures. John Wiley & Sons, New York, USA.

피인용 문헌

  1. Fiber method analysis of rc beam retrofitted with turnbuckle external post-tensioning vol.17, pp.1, 2016, https://doi.org/10.12989/cac.2016.17.1.067
  2. Flexural ductility and deformability of reinforced and prestressed concrete sections vol.8, pp.4, 2011, https://doi.org/10.12989/cac.2011.8.4.473
  3. Flexural ductility of RC beam sections at high strain rates vol.12, pp.4, 2013, https://doi.org/10.12989/cac.2013.12.4.537
  4. Predictions of curvature ductility factor of doubly reinforced concrete beams with high strength materials vol.12, pp.6, 2013, https://doi.org/10.12989/cac.2013.12.6.831
  5. Flexural Strength and Deformability Design of Reinforced Concrete Beams vol.14, 2011, https://doi.org/10.1016/j.proeng.2011.07.176
  6. Design procedure for prestressed concrete beams vol.13, pp.2, 2014, https://doi.org/10.12989/cac.2014.13.2.235
  7. Behaviour of continuous prestressed concrete beams with external tendons vol.55, pp.6, 2015, https://doi.org/10.12989/sem.2015.55.6.1099
  8. Deformability design of high-performance concrete beams vol.22, pp.9, 2013, https://doi.org/10.1002/tal.728
  9. Limited Deformability Design of High-strength Concrete Beams in Low to Moderate Seismicity Regions vol.17, pp.3, 2011, https://doi.org/10.3846/13923730.2011.594219
  10. Flexural behavior model for post-tensioned concrete members with unbonded tendons vol.10, pp.3, 2012, https://doi.org/10.12989/cac.2012.10.3.241
  11. Minimum deformability design of high-strength concrete beams in non-seismic regions vol.8, pp.4, 2011, https://doi.org/10.12989/cac.2011.8.4.445
  12. Towards a model of dry shear keyed joints: modelling of panel tests vol.10, pp.5, 2012, https://doi.org/10.12989/cac.2012.10.5.469
  13. Normalised rotation capacity for deformability evaluation of high-performance concrete beams vol.1, pp.3, 2009, https://doi.org/10.12989/eas.2010.1.3.269
  14. Flexural strength of prestressed concrete members with unbonded tendons vol.38, pp.5, 2011, https://doi.org/10.12989/sem.2011.38.5.675
  15. Concurrent flexural strength and deformability design of high-performance concrete beams vol.40, pp.4, 2009, https://doi.org/10.12989/sem.2011.40.4.541
  16. Nonlinear shear strength of pre-stressed concrete beams vol.41, pp.4, 2009, https://doi.org/10.12989/sem.2012.41.4.441
  17. Numerical and Analytical Behavior of Beams Prestressed with Unbonded Internal or External Steel Tendons: A State-of-the-Art Review vol.44, pp.10, 2009, https://doi.org/10.1007/s13369-019-03934-3