DOI QR코드

DOI QR Code

Predicting the flexural capacity of RC beam with partially unbonded steel reinforcement

  • Wang, Xiao-Hui (Department of Civil Engineering, Shanghai Jiaotong University) ;
  • Liu, Xi-La (Department of Civil Engineering, Shanghai Jiaotong University)
  • 투고 : 2008.10.07
  • 심사 : 2009.06.15
  • 발행 : 2009.06.25

초록

Due to the reduction of bond strength resulting from the high corrosion level of reinforcing bars, influence of this reduction on flexural capacity of reinforced concrete (RC) beam should be considered. An extreme case is considered, where bond strength is complete lost and/or the tensile steel are exposed due to heavy corrosion over a fraction of the beam length. A compatibility condition of deformations of the RC beam with partially unbonded length is proposed. Flexural capacity of this kind of RC beam is predicted by combining the proposed compatibility condition of deformations with equilibrium condition of forces. Comparison between the model's predictions with the experimental results published in the literature shows the practicability of the proposed model. Finally, influence of some parameters on the flexural capacity of RC beam with partially unbonded length is discussed. It is concluded that the flexural capacity of the beam may not be influenced by the completely loss of bond of the whole beam span as long as the tensile steel can yield; whether or not the reduction of the flexural capacity of the beam resulting from the loss of bond over certain length may occur depends on the detailed parameters of the given beam.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China

참고문헌

  1. Almusallam, A.A., Al-Gahtani, A.S., Aziz, A.R., Dakhil, F.H. and Rasheeduzzafar. (1996), "Effect of reinforcement corrosion on flexural behavior of concrete slabs", J. Mater. Civil Eng., ASCE, 8(3), 123-127. https://doi.org/10.1061/(ASCE)0899-1561(1996)8:3(123)
  2. Al-Sulaimani, G.J., Kaleemullah, M., Basunbul, I.A. and Rasheeduzzafar. (1990), "Influence of corrosion and cracking on bond behaviour and strength of reinforced concrete members", Struct. J., ACI, 87(2), 220-231.
  3. American Concrete Institute (1983), Building Code Requirements for Reinforced Concrete (ACI) 318-83, Detroit, ACI.
  4. Au, F.T.K. and Du, J.S. (2004), "Prediction of ultimate stress in unbonded prestressed tendons", Mag. Concrete Res., 56 (1), 1-11. https://doi.org/10.1680/macr.2004.56.1.1
  5. Cairns, J. and Zhao, Z. (1993), "Behaviour of concrete beams with exposed reinforcement", P. I. Civil Eng-Str. B., 99(2), 141-154.
  6. Castel, A., Francois, R. and Arliguie, G. (2000), "Mechanical behaviour of corroded reinforced concrete beams Part 1: experimental study of corroded beams", Mater. Struct., 33(9), 539-544. https://doi.org/10.1007/BF02480533
  7. Coronell, D. and Gambarova, P. (2004), "Structural assessment of corroded reinforced concrete beams: modeling guidelines", J. Struct. Eng., ASCE, 130(8), 1214-1224. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:8(1214)
  8. Dekoster, M., Buyle-Bodin, F., Maurel, O. and Delmas, Y. (2003), "Modelling of the flexural behaviour of RC beams subjected to localised and uniform corrosion", Eng. Struct., 25(10), 1333-1341. https://doi.org/10.1016/S0141-0296(03)00108-1
  9. Du, Y., Clark, L.A. and Chan, A.H.C. (2007), "Impact of reinforcement corrosion on ductile behavior of reinforced concrete beams", Struct. J., ACI, 104(3), 285-293.
  10. EI Maaddawy, T., Soudki, K. and Topper, T. (2005), "Long-term performance of corrosion-damaged reinforced concrete beams", Struct. J., ACI, 102(5), 649-656.
  11. Eyre, J.R. and Nokhasteh, M.A. (1992), "Strength assessment of corrosion damaged reinforced concrete slabs and beams", P. I. Civil Eng-Str. B., 94(2), 197-203.
  12. Li, L.F. (2005), Analysis on bearing capacity of corroded reinforcement members in bending, MSc thesis, Xi'an University of Architecture & Technology, P. R. China.
  13. Mangat, P.S. and Elgarf, M.S. (1999), "Flexural strength of concrete beams with corroding reinforcement", Struct. J., ACI, 96(1), 149-159.
  14. Nokhasteh, M.A., Eyre, J.R. and McLeish, A. (1992), The effect of reinforcement corrosion on the strength of reinforced concrete members, In: Conference on Structural Integrity Assessment, University of Manchester, UK, 314-325.
  15. Pannell, F.N. (1969), "The ultimate moment of resistance of unbonded prestressed concrete beam", Mag. Concrete Res., 21(66), 43-54. https://doi.org/10.1680/macr.1969.21.66.43
  16. Park, R. and Paulay T. (1975), Reinforced concrete Structures, John Wiley & Sons, New York.
  17. Raoof, M. and Lin, Z. (1997), "Structural characteristics of RC beams with exposed main steel", P. I. Civil Eng-Str. B., 122(1), 35-51.
  18. Rodriguez, J., Ortega, L.M. and Casal, J. (1997), "Load carrying capacity of concrete structures with corroded reinforcement", Constr. Build. Mater., 11(4), 239-248. https://doi.org/10.1016/S0950-0618(97)00043-3
  19. Torres-Acosta, A.A., Fabela-Gallegos, M.J., Munoz-Noval, A., Vazquez-Vega, D., Hernandez-Jimenez, J.R. and Martínez-Madrid, M. (2004), "Influence of corrosion on the structural stiffness of reinforced concrete beams", Corros., 60(9), 862-872. https://doi.org/10.5006/1.3287868
  20. Torres-Acosta, A.A., Navarro-Gutierreza, S. and Teran-Guillen, J. (2007), "Residual flexure capacity of corroded reinforced concrete beams", Eng. Struct., 29(6), 1145-1152. https://doi.org/10.1016/j.engstruct.2006.07.018
  21. Vidal, T., Castel, A. and Francois, R. (2007), "Corrosion process and structural performance of a 17 year old reinforced concrete beam stored in chloride environment", Cement Concrete Res., 37(11), 1551-1561. https://doi.org/10.1016/j.cemconres.2007.08.004
  22. Wang, Q.L., Chi, Y.L. and Niu, D.T. (2001), "Analysis study and simulative experiment on unbonded reinforced concrete beams with corroded reinforcement", China Build Struct., 31(4), 51-53.
  23. Zhang, S. and Raoof, M. (1995), "Prediction of the behaviour of RC beams with exposed reinforcement", Mag. Concrete Res., 47(173), 335-344. https://doi.org/10.1680/macr.1995.47.173.335

피인용 문헌

  1. Maximum concrete stress developed in unconfined flexural RC members vol.8, pp.2, 2011, https://doi.org/10.12989/cac.2011.8.2.207
  2. Minimum deformability design of high-strength concrete beams in non-seismic regions vol.8, pp.4, 2011, https://doi.org/10.12989/cac.2011.8.4.445
  3. Investigating the effect of bond slip on the seismic response of RC structures vol.46, pp.5, 2013, https://doi.org/10.12989/sem.2013.46.5.695
  4. Effect of bond and corrosion within partial length on shear behaviour and load capacity of RC beam vol.25, pp.4, 2011, https://doi.org/10.1016/j.conbuildmat.2010.11.081
  5. Analysis of RC beam with unbonded or exposed tensile steel reinforcements and defective stirrup anchorages for shear strength vol.10, pp.1, 2012, https://doi.org/10.12989/cac.2012.10.1.059