DOI QR코드

DOI QR Code

Wind-tunnel blockage effect on drag coefficient of circular cylinders

  • Anthoine, J. (Von Karman Institute for Fluid Dynamics) ;
  • Olivari, D. (AirSR, Belgium and von Karman Institute for Fluid Dynamics) ;
  • Portugaels, D. (Service Public de Wallonie)
  • 투고 : 2009.04.08
  • 심사 : 2009.08.20
  • 발행 : 2009.11.25

초록

This paper explains how to correctly measure the drag coefficient of a circular cylinder in wind tunnels with large blockage ratios and for the sub-critical to the super-critical flow regimes. When dealing with large blockage ratios, the drag has to be corrected for wall constraints. Different formulations for correcting blockage effect are compared for each flow regime based on drag measurements of smooth circular cylinders performed in a wind tunnel for three different blockage ratios. None of the correction model known in the literature is valid for all the flow regimes. To optimize the correction and reduce the scatter of the results, different correction models should be combined depending on the flow regime. In the sub-critical regime, the best results are obtained using Allen and Vincenti's formula or Maskell's theory with ${\varepsilon}$=0.96. In the super-critical regime, one should prefer using Glauert's formula with G=0.6 or the model of Modi and El-Sherbiny. The change in the formulations appears at the flow transition with a variation of the wake pattern when passing from sub-critical to super-critical flow regimes. This parameter being not considered in the known blockage corrections, these theories are not valid for all the flow regimes.

키워드

참고문헌

  1. Achenbach, E. (1968), "Distribution of local pressure and skin friction around a circular cylinder in cross flow up to $R=5{\times}10^6$", J. Fluid Mech., 34, 625-639. https://doi.org/10.1017/S0022112068002120
  2. Allen, H.J. and Vincenti, W.G. (1944), "Wall interference in a two-Dimensional flow wind tunnel, with consideration for the effect of compressibility", NACA Tech. Rep., No. 782.
  3. Batchelor, G.K. (1967), An introduction to Fluid Dynamics, Cambridge University Press.
  4. Chen, P.Y. and Doepker, P.E. (1975), "Flow-induced forces on a cylinder for different wall confinements at high Reynolds numbers ($3.5{\times}10^5$)$1.2{\times}10^6$)", J. Press. Vess. T., 85, 110-117.
  5. Cheung, C.K. and Melbourne, W.H. (1980), "Wind tunnel blockage effects on a circular cylinder in turbulent flows", Proc. of the 7th Australian Hydraulics and Fluid Mechanics Conf., Brisbane, 127-130.
  6. Comolet, R. (1994), Mecanique experimentale des fluides. Tome 2, dynamique des fluides reels, turbomachines, 4eme edition, Masson, Paris.
  7. Cooper, K.R. (1998), "Bluff-body blockage corrections in closed- and open-test-section wind tunnels", AGARGograph 336 "Wind Tunnel Wall Corrections", chapter 6, NATO.
  8. Coutanceau, M. and Defaye, J.R. (1991), "Circular cylinder wake configurations: a flow visualization survey", Appl. Mech. Rev., 44, 255-305. https://doi.org/10.1115/1.3119504
  9. Cowdrey, F. (1967), "The application of Maskell's theory of wind-tunnel blockage to very large solid models", NPL Aero Rep., No. 1247.
  10. Fage, A. (1929), "On the two dimensional flow past a body of symmetrical cross-section mounted in a channel of finite breadth", Brit. Aero. Res. Council, Rep. and Memo., No. 1223.
  11. Farell, C., Carrasquel, S., Guven, O. and Patel, V.C. (1977), "Effect of wind-tunnel walls on the flow past circular cylinders and cooling tower models", J. Fluids Eng., 99, 470-479. https://doi.org/10.1115/1.3448820
  12. Fox, K.A. and West, G.S. (1990), "On the use of end plates with circular cylinders", Exp. Fluids, 9, 237-239. https://doi.org/10.1007/BF00190426
  13. Glauert, H. (1933), "Wind tunnel interference on wings, bodies and airscrews", Brit. Aero. Res. Council, Rep. and Memo., No. 1566.
  14. Gould, R.W.F. (1970), "Wake blockage corrections in a closed wind tunnel for one or two wall-mounted models subject to separated flow", Brit. Aero. Res. Council, Rep. and Memo., No. 3649.
  15. Hackett, J.E. and Cooper, K.R. (2001), "Extensions to Maskell's theory for blockage effects on bluff bodies in a closed wind tunnel", Aeronaut. J., 105, 409-418. https://doi.org/10.1017/S0001924000012380
  16. Hoerner, S. (1965), Fluid dynamic drag, published by the author.
  17. Houghton, E.L. and Carpenter, P.W. (2003), Aerodynamics for engineering students, 5th edition, Butterworth & Heinemann, Oxford.
  18. Kong, L. and Parkinson, G.V. (1995), "Road vehicle testing in a blockage tolerant wind tunnel", J. Wind Eng. Ind. Aerod., 57, 137-143. https://doi.org/10.1016/0167-6105(94)00108-P
  19. Kubo, Y., Miyazaki, M. and Kato, K. (1989), "Effects of end plates and blockage of structural members on drag force", J. Wind Eng. Ind. Aerod., 32, 329-342. https://doi.org/10.1016/0167-6105(89)90006-8
  20. Lock, C.N.H. (1929), "The interference of a wind tunnel on a symmetric body", Brit. Aero. Res. Council, Rep. and Memo. No. 1275.
  21. Maskell, E.C. (1965), "A theory of the blockage effects on bluff bodies and stalled wings in a closed wind tunnel", Brit. Aero. Res. Council, Rep. and Memo., No. 3400.
  22. Modi, V.J. and El-Sherbiny, S.E. (1973), On the wall confinement effects in the industrial aerodynamics studies, BNES Vibration in Nuclear Plant, paper 116, ed. Wakefield, J., Keswick, UK.
  23. Norberg, C. (1994), "An experimental investigation of the flow around a circular cylinder: influence of aspect ratio", J. Fluid Mech., 258, 287-316. https://doi.org/10.1017/S0022112094003332
  24. Parkinson, G.V. (1984), "A tolerant wind tunnel for industrial aerodynamics", J. Wind Eng. Ind. Aerod., 16, 293-300. https://doi.org/10.1016/0167-6105(84)90012-6
  25. Roshko, A. (1961), "Experiments on the flow past a circular cylinder at very high Reynolds numbers", J. Fluid Mech., 10, 345-356. https://doi.org/10.1017/S0022112061000950
  26. Roshko, A. (1993), "Perspectives on bluff body aerodynamics", J. Wind Eng. Ind. Aerod., 49, 79-100. https://doi.org/10.1016/0167-6105(93)90007-B
  27. Simiu, E. and Scanlan, R.H. (1996), Wind effects on structures: fundamentals and applications to design, 3rd edition, John Wiley, New York.
  28. Slaouti, A. and Gerrard, J.H. (1981), "An experimental investigation of the end effects on the wake of a circular cylinder towed through water at low Reynolds numbers", J. Fluid Mech., 112, 297-314. https://doi.org/10.1017/S0022112081000414
  29. Wieselberger, C. (1923), Der Widerstand verschiedener Korper, Ergebnisse der Aerodynamischen Versuchsanstalt zu Gottingen, II. Lieferung, ${\cdot}{\cdot}{\cdot}$, S. 33-34.
  30. Williamson, C.H.K. (1996), "Vortex dynamics in the cylinder wake", Ann. Rev. Fluid. Mech., 28, 477-539. https://doi.org/10.1146/annurev.fl.28.010196.002401
  31. Zdravkovich, M.M. (1997), Flow around circular cylinders, Vol. 1: Fundamentals, Oxford Science Publications, Oxford.
  32. Zdravkovich, M.M. (2003), Flow around circular cylinders, Vol. 2: Applications, Oxford Science Publications, Oxford.

피인용 문헌

  1. Experimental Investigation of Debris-Induced Loading in Tsunami-Like Flood Events vol.7, pp.3, 2017, https://doi.org/10.3390/geosciences7030074
  2. Active aerodynamic drag reduction on morphable cylinders vol.2, pp.12, 2017, https://doi.org/10.1103/PhysRevFluids.2.123903
  3. Drag on pairs of square section obstacles in free-surface flows vol.3, pp.12, 2009, https://doi.org/10.1103/physrevfluids.3.123802