DOI QR코드

DOI QR Code

Post earthquake performance monitoring of a typical highway overpass bridge

  • Iranmanesh, A. (Department of Civil and Materials Engineering, University of Illinois at Chicago) ;
  • Bassam, A. (Department of Civil and Materials Engineering, University of Illinois at Chicago) ;
  • Ansari, F. (Department of Civil and Materials Engineering, University of Illinois at Chicago)
  • Received : 2008.08.19
  • Accepted : 2008.10.10
  • Published : 2009.07.25

Abstract

Bridges form crucial links in the transportation network especially in high seismic risk regions. This research aims to provide a quantitative methodology for post-earthquake performance evaluation of the bridges. The experimental portion of the research involved shake table tests of a 4-span bridge which was subjected to progressively increasing amplitudes of seismic motions recorded from the Northridge earthquake. As part of this project, a high resolution long gauge fiber optic displacement sensor was developed for post-seismic evaluation of damage in the columns of the bridge. The nonlinear finite element model was developed using Opensees program to simulate the response of the bridge and the abutments to the seismic loads. The model was modified to predict the bent displacements of the bridge commensurate with the measured bent displacements obtained from experimental analysis results. Following seismic events, the tangential stiffness matrix of the whole structure is reduced due to reduction in structural strength. The nonlinear static push over analysis using current damaged stiffness matrix provides the longitudinal and transverse ultimate capacities of the bridge. Capacity loss in the transverse and longitudinal directions following the seismic events was correlated to the maximum displacements of the deck recorded during the events.

Keywords

Acknowledgement

Supported by : National Science Foundation

References

  1. Ansari, F. (2007), "Practical implementation of optical fiber sensors in civil structural health monitoring", J. Intel. Mat. Syst. Str., 18(8), 879-889. https://doi.org/10.1177/1045389X06075760
  2. Ansari, F. (2005), Sensing Issues in Civil Structural Health Monitoring, Springer Publishing Co., The Netherlands.
  3. Applied Technology Council (ATC) (2006), Next-Generation Performance Based Seismic Design Guidelines, Program Plan for New and Existing Buildings, FEMA-445.
  4. Applied Technology Council (ATC) (2005), Improvement of Inelastic Analysis Procedures, FEMA-440.
  5. ATC/MCEER (2001), Recommended LRFD guidelines for the seismic design of highway bridges (2002) Part 1: specifications, MCEER-02-SP01, MCEER/ATC joint venture, NCHRP 12-49 Project Team.
  6. Bazant, Z.P. (2005), Scaling of Structural Strength, 336 pages, Elsevier.
  7. Buckle, I.G. (1994), The Northridge California Earthquake of January 17, 1994: Performance of Highway Bridges, NCEER-94-0008, National Centre for Earthquake Engineering Research, Buffalo, NY.
  8. Chaboche, J. (1988), "Continuum damage mechanics. I - General concepts. II - Damage growth, crack initiation, and crack growth", J. Appl. Mech.-T., ASME, 55, 59-724. https://doi.org/10.1115/1.3173661
  9. Davis, P.J. and Rabinowitz, P. (1984), Methods of Numerical Integration, 2nd ed., Academic Press, New York.
  10. Karsan, I.D. and Jirsa, J.O. (1969), ''Behavior of concrete under compressive loadings", J. Struct. Div. ASCE, 95(12), 2543-2563.
  11. Kratziga, W.B. and Petrynab, Y.S. (2005), "Structural damage and life-time estimates by nonlinear FE simulation", Eng. Struct., 27, 1726-1740. https://doi.org/10.1016/j.engstruct.2005.04.015
  12. Luco, N., Bazzurro, P. and Cornell, C.A. (2004), "Dynamic versus static computation of the residual capacity of a mainshock-damaged building to withstand an aftershock", Proc. of 13th WCEE, Paper 2405, Vancouver, B.C., Canada, August 1-6.
  13. Mander, J., Priestley, N. and Park, R. (1988), "Theoretical stress-strain model for confined concrete", J. Struct. Eng. ASCE, 114(8), 1804-1849. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804)
  14. Mazzoni, S., McKenna, F. and Fenves, G.L. (2005), OpenSees Command Language Manual, Berkeley, CA.
  15. McKenna, F. and Fenves, G.L. (2000), "An object-oriented software design for parallel structural analysis", Proc. of the SEI/ASCE Structures Congress, Philadelphia, PA.
  16. Nelson, R.B., Saiidi, M.S. and Zadeh, S. (2007), "Experimental evaluation of performance of conventional bridge systems", Report No. CCEER-07-04, Center for Civil Engineering Earthquake Research, University of Nevada, Reno, NV.
  17. Newmark, N.M. (1959), "A method of computation for structural dynamics", J. Eng. Mech. Div. ASCE, 85, 67-94.
  18. Wehbe, N. and Saiidi, M. (2003), "User's Manual for RCMC v. 2.0, A Computer Program for Moment-Curvature Analysis of Confined and Unconfined Reinforced Concrete Sections", Report No. CCEER 03-2, Civil Engineering Department, University of Nevada, Reno, NV.
  19. Zadeh, M.S. and Saiidi, M.S. (2007), "Pre-test analytical studies of NEESR-SG 4-Span bridge model using opensees", Report No. CCEER-07-3, Center for Civil Engineering Earthquake Research, University of Nevada, Reno, NV.

Cited by

  1. Vibration-Based Method and Sensor for Monitoring of Bridge Scour vol.17, pp.6, 2012, https://doi.org/10.1061/(ASCE)BE.1943-5592.0000362
  2. Modal analysis of structures based on distributed measurement of dynamic strains with optical fibers vol.159, pp.None, 2021, https://doi.org/10.1016/j.ymssp.2021.107835