DOI QR코드

DOI QR Code

Damage characterization of beam-column joints reinforced with GFRP under reversed cyclic loading

  • Said, A.M. (Dept. of Civil & Environmental Engineering, University of Nevada)
  • Received : 2008.09.20
  • Accepted : 2008.10.17
  • Published : 2009.07.25

Abstract

The use of fiber reinforced polymer (FRP) reinforcement in concrete structures has been on the rise due to its advantages over conventional steel reinforcement such as corrosion. Reinforcing steel corrosion has been the primary cause of deterioration of reinforced concrete (RC) structures, resulting in tremendous annual repair costs. One application of FRP reinforcement to be further explored is its use in RC frames. Nonetheless, due to FRP's inherently elastic behavior, FRP-reinforced (FRP-RC) members exhibit low ductility and energy dissipation as well as different damage mechanisms. Furthermore, current design standards for FRP-RC structures do not address seismic design in which the beam-column joint is a key issue. During an earthquake, the safety of beam-column joints is essential to the whole structure integrity. Thus, research is needed to gain better understanding of the behavior of FRP-RC structures and their damage mechanisms under seismic loading. In this study, two full-scale beam-column joint specimens reinforced with steel and GFRP configurations were tested under quasi-static loading. The control steel-reinforced specimen was detailed according to current design code provisions. The GFRP-RC specimen was detailed in a similar scheme. The damage in the two specimens is characterized to compare their performance under simulated seismic loading.

Keywords

References

  1. ACI Committee 440 (2006), Guide for the Design and Construction of Concrete Reinforced with FRP Bars, ACI 440.1R-06, ACI, Detroit.
  2. Alsayed, S.H., Al-Salloum, Y.A. and Almusallam, T.H. (1997), "Shear design of GFRP bars", Proc. of 3rd Int. Sym. on Non-Metallic Reinforcement for Concrete Structures, FRPRCS-3, Sapporo, Japan, 285-292.
  3. Canadian Highway Bridge Design Code (CHBDC) (1998), Fibre reinforced structures, Sec. 16, 687-705.
  4. Corley, W.G. (1995), "Ductility of columns, walls, and beams-how much is enough?", Proc. of The Thomas Paulay Sym., Recent Developments in Lateral Force Transfer in Buildings, ACI SP-157, 1993, 331-350.
  5. CSA A23.3-04 (2005), Design of Concrete Structures, Canadian Standards Association, Rexdale, Ontario, Canada.
  6. CSA S806-02 (2002), Design and Construction of Building Components using Fibre-Reinforced Polymers, Canadian Standards Association, Ontario, Canada.
  7. Dutta, P.K., Bailey, D.M., Tsai, S.W., Jensen, D.W., Hayes Jr., J.R., McDonald, W.E., Smart, C.W., Colwell, T., Earl, J.S. and Chen, H.J. (1998), "Composite grids for reinforcement of concrete structures", US Army Corps of Engineers, Construction Engineering Research Laboratories, USACERL Technical Report 98/81, 158 p.
  8. Fukuyama, H., Masuada, H., Sonobe, Y. and Tanigaki, M. (1995), "Structural performance of concrete frames reinforced with FRP reinforcement", Proc. of the 2nd Int. RILEM Sym. on Non-Metallic (FRP) Reinforcement for Concrete Structures, FRPRCS-2, Ghent, Belgium, 275-286.
  9. ISIS Canada (2001), Reinforcing Concrete Structures with Fibre Reinforced Polymers, Manual No. 3.
  10. Joint ACI-ASCE Committee 352 (2002), Recommendations for Design of Beam Column Connections in Monolithic Reinforced Concrete Structures, ACI, Detroit.
  11. JSCE (1997), Recommendations for the Design and Construction of Concrete Structures using Continuous Fiber Reinforcing Materials, Concrete Eng. Series 23.
  12. Kobayashi, K., Fukuyama, H., Fujisaki, T., Fukai, S. and Kanakubo, T. (2003), "Design practice of framed building structures based on AIJ design guideline 2002", Proc. of the 6th Int. Sym. on Fiber Reinforced Polymers in Concrete Structures, FRPRCS-6, Singapore, 1435-1444.
  13. Lemaitre, J. and Desmorat, R. (2005), Engineering Damage Mechanics: Ductile, Creep, Fatigue and Brittle Failures, Springer, The Netherlands.
  14. Nagasaka, T., Fukuyama, H. and Tanigaki, M. (1993), "Shear performance of concrete beams reinforced with FRP stirrups", Proc. of the Int. Sym. on Fiber Reinforced Plastic Reinforcement for Concrete Structures, ACI SP-138, 789-811.
  15. NEFCOM Corporation (1996), Mechanical Properties of NEFMAC, Tokyo.
  16. Priestly, M.J.N., Seible, F. and Calvi, G.M. (1996), Seismic Design and Retrofit of Bridges, Wiley Interscience, New York.
  17. Rahman, A.H., Kingsley, C.Y. and Kobayashi, K. (2000), "Service and ultimate load behavior of bridge deck reinforced with carbon FRP grid", J. Compos. Constr., 4(1), 16-23. https://doi.org/10.1061/(ASCE)1090-0268(2000)4:1(16)
  18. Sharbatdar, M.K. and Saatcioglu, M. (2004), "Behaviour of FRP reinforced concrete under simulated seismic loading", Proc. of the 13th World Conf. on Earthquake Engineering, Vancouver, Canada, Aug. 1-6, Paper No. 2717.
  19. Shehata, E.F.G. (1999), "Fibre-Reinforced Polymer (FRP) for Shear Reinforcement in Concrete Structures", Ph. D. Thesis, University of Manitoba, Canada.
  20. Sugita, M. (1993), NEFMAC grid type reinforcement, Alternative Materials for The Reinforcing and Prestressing of Concrete, Clarke, J. L. (Ed.), Blackie Academic and Professional, pp. 55-82.
  21. Uzumeri, S.M. and Seckin, M. (1974), "Behaviour of reinforced concrete beam-column joints subjected to slow load reversals", Report No. 74-05, Department of Civil Engineering, University of Toronto, 72 p.

Cited by

  1. Experimental investigation on joints between steel-reinforced concrete T-shaped column and reinforced concrete beam under bidirectional low-cyclic reversed loading vol.20, pp.3, 2017, https://doi.org/10.1177/1369433216653841
  2. Structural performance of steel-truss-reinforced composite joints under cyclic loading vol.171, pp.2, 2018, https://doi.org/10.1680/jstbu.16.00188
  3. Seismic behaviour of repaired superelastic shape memory alloy reinforced concrete beam-column joint vol.7, pp.5, 2011, https://doi.org/10.12989/sss.2011.7.5.329
  4. Seismic Performances of SRC Special-Shaped Columns and RC Beam Joints Under Double-Direction Low-Cyclic Reversed Loading vol.8, pp.None, 2009, https://doi.org/10.3389/fmats.2021.761376