DOI QR코드

DOI QR Code

Health monitoring of a bridge system using strong motion data

  • Mosalam, K.M. (Department of Civil Engineering, University of California) ;
  • Arici, Y. (Middle East Technical University)
  • 투고 : 2008.09.14
  • 심사 : 2008.10.23
  • 발행 : 2009.07.25

초록

In this paper, the acceptability of system identification results for health monitoring of instrumented bridges is addressed. This is conducted by comparing the confidence intervals of identified modal parameters for a bridge in California, namely Truckee I80/Truckee river bridge, with the change of these parameters caused by several damage scenarios. A challenge to the accuracy of the identified modal parameters involves consequences regarding the damage detection and health monitoring, as some of the identified modal information is essentially not useable for acquiring a reliable damage diagnosis of the bridge system. Use of strong motion data has limitations that should not be ignored. The results and conclusions underline these limitations while presenting the opportunities offered by system identification using strong motion data for better understanding and monitoring the health of bridge systems.

키워드

참고문헌

  1. ACI Committee 318-02 (2003), Building Code Requirements for Structural Concrete and Commentary, American Concrete Institute, Detroit.
  2. Arici, Y. and Mosalam, K.M. (2006), "Modal identification and health monitoring of instrumented bridges using seismic acceleration records", Technical Report, EERC 2006-2, Earthquake Engineering Research Center, University of California, Berkeley.
  3. Arici, Y. and Mosalam, K.M. (2003), "System identification of instrumented bridge systems", Earthq. Eng. Struct. D., 32(7), 999-1020. https://doi.org/10.1002/eqe.259
  4. Arici, Y. and Mosalam, K.M. (2005a), "Statistical significance of modal parameters of bridge systems identified from strong motion data", Earthq. Eng. Struct. D., 34(10), 1323-1341. https://doi.org/10.1002/eqe.482
  5. Arici, Y. and Mosalam, K.M. (2005b), "Modal identification of bridge systems using state-space methods", J. Struct. Control Health Monit., 12(3-4), 381-404. https://doi.org/10.1002/stc.76
  6. Beck, J.L. (1983), "System identification applied to strong motion records from structures", Earthquake Ground Motion and Its Effect on Strucucture, AMD, 53, 109-133.
  7. Cakmak, A.S., Rodriguez-Gomez, S. and DiPasquale, E. (1991), "Seismic damage assessment for reinforced concrete structures", Proc. of the 5th Int. Conf. on Soil Dynamics and Earthquake Engineering, Germany, Sept. 23-26, 515-544.
  8. De Witte, F.C. (2003), DIANA User's Manual: Release 8.1., TNO DIANA Bv.
  9. DiPasquale, E. and Cakmak, A.S. (1990), "Seismic damage assessment using linear models", Soil Dyn. Earthq. Eng., 9(4), 194-215. https://doi.org/10.1016/S0267-7261(05)80010-7
  10. Farrar, C. and Jauregui, D. (1996), "Damage detection algorithms applied to experimental and numerical modal data from the I-40 bridge", Technical Report, LA-13074-MS, Los Alamos.
  11. Goel, R.K. and Chopra, A.K. (1995), "Seismic response study of the Hwy 101/Painter street overpass near Eureka using strong motion records", Data Utilization Report CSMIP/95-01, CSMIP.
  12. Loh, C.H., Chen, I.H. and Lin, C.Y. (1998), "System identification of frames under earthquake loading", Asia- Pacific Workshop on Seismic Design and Retrofit of Structures, Taipei.
  13. Mander, J.B., Priestley, M.J.N. and Park, R. (1988), "Theoretical stress-strain model for confined concrete", J. Struct. Eng. ASCE, 114(8), 1804-1826. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804)
  14. Maroney, B.H. and Chai, Y.H. (1994), "Bridge abutment stiffness and strength under earthquake loadings", Proc. 2nd Int. Workshop on Seismic Design & Retrofitting of R.C. Bridges, New Zealand.
  15. Mau, S.T. and Revadigar, S. (1994), "Detecting structural damage from building seismic records", Proc.5th U.S. National Conf. on Earthquake Engineering, EERI, Oakland, California, 2, 331-340.
  16. Mazzoni, S., McKenna, F., Scott, M.H. and Fenves, G.L. (2004), OpenSees User's Manual, Pacific Earthquake Engineering Center, University of California, Berkeley, http://opensees.berkeley.edu.
  17. Safak, E. (1999), "Wave-propagation formulation of seismic response of multistory buildings", J. Struct. Eng. ASCE, 125(4), 426-437. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:4(426)
  18. Wood, M.G. (1992), "Damage analysis of bridge structures using vibrational techniques", Ph.D. Dissertation, Aston University, UK.

피인용 문헌

  1. Damage Detection Using Improved Direct Stiffness Calculations — A Case Study vol.16, pp.01, 2016, https://doi.org/10.1142/S0219455416400022