DOI QR코드

DOI QR Code

Diagnostic/prognostic health monitoring system and evaluation of a composite bridge

  • Mosallam, A. (University of California, Civil and Environmental Engineering Department) ;
  • Miraj, R. (University of California, Civil and Environmental Engineering Department) ;
  • Abdi, F. (AlphaSTAR Corporation)
  • 투고 : 2008.10.03
  • 심사 : 2008.11.01
  • 발행 : 2009.07.25

초록

Composite bridges offer many advantages compared to current steel and aluminum bridges. This paper presents the results of a comprehensive on-going research program to develop innovative Diagnostic Prognostic System (DPS) and a structural evaluation of Composite Army Bridge (CAB) system. The DPS is founded on three technologies: optical fiber sensing, remote data transmission, and virtual testing. In developing this system, both laboratory and virtual test were used in different damage scenarios. Health monitoring with DPS entailed comparing live strain data to archived strained data in various bridge locations. For field repairs, a family of composite chords was subjected to simple ramp loads in search of ultimate strength. As such, composite bridge specimens showcased their strengths, heralded the viability of virtual testing, highlighted the efficacy of field repair, and confirmed the merits of health monitoring.

키워드

참고문헌

  1. Abdi, F., Surdenas, J., Mosallam, A. and Wang, J.J. (2003), Field repair technology for composite bridges, phase I final report, Submitted to U.S. Army TACOM.
  2. Advanced Composites for Bridge Infrastructure Renewal-Phase II (2000), DARPA Agreement 0030, Volume IITask No. MDA972-94-3-14, Submitted to DARPA by Advanced Composites Technology Transfer/Bridge Infrastructure Renewal Consortium.
  3. Chamis, C.C. (1969), Failure Criteria for Filamentary Composites, Composite Materials Testing and Design: ASTM STP 460, (American Society for Testing and Materials).
  4. Chamis, C.C. and Sinclair, J.H. (1979), Micromechanics of Intraply Hybrid Composites: Elastic and Thermal Properties, NASA TM-79253.
  5. Hill, R. (1950), The Mathematical Theory of Plasticity, Oxford University Press, Oxford.
  6. Morrow, J. (1968), Fatigue Design Handbook, Society of Automotive Engineers, Graham.
  7. Mosallam, A.S. and Haroun M.A. (2003), "Tructural evaluation, repair and construction of a composite highway bridge deck", 2nd Int. Workshop on Structural Composites for Infrastructure Applications, NSF/HBRC, Cairo, Egypt, December 17-18.
  8. Mosallam, A., Ramki, I. and Abdi, F. (2005), Progressive Failure Analysis of Composite Army Bridge, CICE Publications, Australia.
  9. Murthy, P.L.N. and Chamis, C.C. (1986), "Integrated composite analyzer (ICAN): users and programmers manual", NASA Technical Paper 2515.
  10. Nakazawa, S., Dias, J.B. and Spiegel, M.S. (1987), MHOST Users' Manual, Prepared for NASA Lewis Research Center by MARC Analysis Research Corp.
  11. Ramki, I., Mosallam, A. and Abdi, F. (2004), "Progressive failure analysis of composite army bridge", The Second Int. Conf. on FRP Composites in Civil Engineering, Adelaide, Australia, December 8-10.
  12. Tsai, S.W. (1968), Strength Theories of Filamentary Structures, in Fundamental Aspects of Fiber Reinforced Plastic Composites, edited by R.T. Schwartz and H.S. Schwartz, Eds., Interscience, New York.

피인용 문헌

  1. A comparative study on static and dynamic responses of FRP composite and steel suspension bridges vol.30, pp.15, 2011, https://doi.org/10.1177/0731684411418391
  2. The combined deterministic stochastic subspace based system identification in buildings vol.38, pp.3, 2009, https://doi.org/10.12989/sem.2011.38.3.315