DOI QR코드

DOI QR Code

Advanced analysis of cyclic behaviour of plane steel frames with semi-rigid connections

  • Saravanan, M. (Structural Engineering Research Centre, CSIR Campus) ;
  • Arul Jayachandran, S. (Structural Engineering Research Centre, CSIR Campus) ;
  • Marimuthu, V. (Structural Engineering Research Centre, CSIR Campus) ;
  • Prabha, P. (Structural Engineering Research Centre, CSIR Campus)
  • 투고 : 2008.11.11
  • 심사 : 2009.07.14
  • 발행 : 2009.07.25

초록

This paper presents the details of an advanced Finite Element (FE) analysis of a plane steel portal frame with semi-rigid beam-to-column connections subjected cyclic loading. In spite of several component models on cyclic behaviour of connections presented in the literature, works on numerical investigations on cyclic behaviour of full scale frames are rather scarce. This paper presents the evolution of an FE model which deals comprehensively with the issues related to cyclic behaviour of full scale steel frames using ABAQUS software. In the material modeling, combined kinematic/isotropic hardening model and isotropic hardening model along with Von Mises criteria are used. Connection non-linearity is also considered in the analysis. The bolt slip which happens in friction grip connection is modeled. The bolt load variation during loading, which is a pivotal issue in reality, has been taken care in the present model. This aspect, according to the knowledge of the authors, has been first time reported in the literature. The numerically predicted results using the methodology evolved in the present study, for the cyclic behaviour of a cantilever beam and a rigid frame, are validated with experimental results available in the literature. The moment-rotation and deflection responses of the evolved model, match well with experimental results. This proves that the methodology for evolving the steel frame and connection model presented in this paper is closer to real frame behaviour as evident from the good comparison and hence paves the way for further parametric studies on cyclic behaviour of flexibly connected frames.

키워드

참고문헌

  1. ABAQUS Analysis Users Manual (2008), Models for Metals Subjected to Cyclic Loading, Hibbit, Karlson & Sorensen, Inc., pp. 18.2.2.
  2. Adany, S. and Dunai, L. (2004), "Finite element simulation of the cyclic behaviour of end-plate joints", Comput. Struct., 82(23-26), 2131-2143. https://doi.org/10.1016/j.compstruc.2004.03.062
  3. ATC (1992), "Guidelines for cyclic Seismic Testing of Components of Steel Structures", Report No.24, Applied Technology Council, Redwood City, CA.
  4. Bjorhovde, R., Brozzetti, J. and Colson, A. (1990), "Classification System for Beam-to-Column Connections", Struct. Eng., 116(11), 3059-3076. https://doi.org/10.1061/(ASCE)0733-9445(1990)116:11(3059)
  5. Calado, L. (2003), "Non-linear cyclic model of top and seat with web angle for steel beam-to-column connections", Eng. Struct., 25, 1189-1197. https://doi.org/10.1016/S0141-0296(03)00067-1
  6. Citipitioglu, A.M., Haj-Ali, R.M. and White, D.W. (2002), "Refined 3D finite element modeling of partiallyrestrained connections including slip", J. Constr. Steel Res., 58(5), 995-1013. https://doi.org/10.1016/S0143-974X(01)00087-6
  7. Cronvall, O. and Sarajarvi, U. (2006), Simulation and Analysis of Data for Enhancing Low Cycle Fatigue Test Procedures, VTT Technical Research Centre of Finland, NKS-126, ISBN 87-7893-188-6.
  8. Dusicka, P., Itani, A.M. and Buckle, I.G. (2007), "Cyclic response of plate steels under large inelastic strains", J. Constr. Steel Res., 63(2), 156-164. https://doi.org/10.1016/j.jcsr.2006.03.006
  9. Elnashai, A.S., Elghazouli, A.Y. and Denesh-Ashtiani, F.A. (1998), "Response of semi-rigid steel frames to cyclic and earthquake loads", Struct. Eng., 124(8), 857-867. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:8(857)
  10. Hong, K., Yang, J.G. and Lee, S.K. (2002), "Moment rotation behavior of double angle connections subjected to shear load", Eng. Struct., 24(1), 125-132. https://doi.org/10.1016/S0141-0296(01)00014-1
  11. IS 800 (2007), General construction in steel code of practice (Third revision), BIS, New Delhi.
  12. Ivanyi, M. (2000), "Full-scale tests of steel frames with semi-rigid connections", Eng. Struct., 22(2), 168-179. https://doi.org/10.1016/S0141-0296(98)00106-0
  13. Kaufmann, E.J., Metrovich, B. and Pense, A.W. (2001), "Characterization of cyclic inelastic strain behaviour on properties of A572 Gr.50 and A913 Gr.50 Rolled Sections", Advanced Technology for Large Scale Structural Systems, ATLSS Report No.01-13, Lehigh University.
  14. Nader, N. and Astaneh, A. (1992), "Proposed Code Provision for Seismic Design of Steel semi-rigid Frames", submitted to AISC Engineering Journal for review and publication.
  15. Pucinotti, R. (2006), "Cyclic mechanical model of semi-rigid top and seat and double web angle connections", Steel Compos. Struct., 6(2), 139-157. https://doi.org/10.12989/scs.2006.6.2.139
  16. Yang, C.M. and Kim, Y.M. (2007), "Cyclic behaviour of beam-column connections in steel portals", Proc. of the Institution of Civil Engineers: Structures & Buildings, 160(SB5), 259-272. https://doi.org/10.1680/stbu.2007.160.5.259

피인용 문헌

  1. Seismic Performance of Steel Frames with Semirigid Connections vol.2017, 2017, https://doi.org/10.1155/2017/5284247
  2. The structural detailing effect on seismic behavior of steel moment resisting connections vol.35, pp.5, 2010, https://doi.org/10.12989/sem.2010.35.5.617
  3. Semi-rigid connection modeling for steel frameworks vol.35, pp.4, 2010, https://doi.org/10.12989/sem.2010.35.4.431
  4. Study of the seismic performance of steel frames in the elliptic bracing vol.18, pp.5, 2016, https://doi.org/10.21595/jve.2016.16858
  5. Moment-Rotation Model for Blind-Bolted Flush End-Plate Connections in Composite Frame Structures vol.141, pp.9, 2015, https://doi.org/10.1061/(ASCE)ST.1943-541X.0001147
  6. Experimental evaluation on the seismic performance of steel knee braced frame structures with energy dissipation mechanism vol.11, pp.1, 2011, https://doi.org/10.12989/scs.2011.11.1.077
  7. Nonlinear P-Δ analysis of steel frames with semi-rigid connections vol.14, pp.1, 2013, https://doi.org/10.12989/scs.2013.14.1.001
  8. Seismic performance of steel frames with controlled buckling mechanisms in knee braces vol.107, 2015, https://doi.org/10.1016/j.jcsr.2015.01.010
  9. Three-dimensional numerical and linearly distributed multi-parameter fitted analytical modeling of hybrid beam–column with partially welded flush end-plate connection vol.21, pp.12, 2018, https://doi.org/10.1177/1369433218754698
  10. Mechanical behavior investigation of steel connections using a modified component method vol.25, pp.1, 2009, https://doi.org/10.12989/scs.2017.25.1.117