전기학회논문지P (The Transactions of the Korean Institute of Electrical Engineers P)

  • 제58권3호
  • /
  • Pages.241-248
  • /
  • 2009
  • /
  • 1229-800X(pISSN)
  • /
  • 2586-7792(eISSN)
대한전기학회 (The Korean Institute of Electrical Engineers)
권호 표지

실시간 확률 모델링 기법을 이용한 유도기기의 고장검출 및 진단시스템

Fault Detection and Diagnosis Systems of Induction Machines using Real-Time Stochastic Modeling Approach

  • 이진우 (동아대학교 전기공학과) ;
  • 김광수 (동아대학교 전기공학과) ;
  • 조현철 (울산과학대학 전기전자학부) ;
  • 이영진 (한국폴리텍 항공대학 항공전기과) ;
  • 이권순 (동아대학교 전기공학과)
  • 발행 : 2009.09.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper presents stochastic methodology based fault detection algorithm for induction motor systems. We measure current of healthy induction motors by means of hall sensor systems and then establish its probability distribution. We propose online probability density estimation which is effective in real-time implementation due to its simplicity and low computational burden. In addition, we accomplish theoretical analysis of the proposed estimation to demonstrate its convergence property by using statistical convergence and system stability theories. We apply our fault detection approach to three-phase induction motors and achieve real-time experiment for evaluating its reliability and practicability in industrial fields.

키워드

참고문헌

  1. R. Isermann, "Process fault detection based on modeling and estimation methods - A survey", Autometica, vol.20, pp. 387-404, 1984 https://doi.org/10.1016/0005-1098(84)90098-0
  2. P.M. Frank, "Fault diagnosis in dynamic systems using analytical and knowledge - based redundancy - A survey and some new result", Autometica, vol. 26, no.3, pp.459-474, 1990 https://doi.org/10.1016/0005-1098(90)90018-D
  3. R. F. Stengel, "Intelligent failure-tolerant control", IEEE Control Systems, pp. 14-23, June, 1991
  4. 김미정, 김병국, 조윤현, 황돈하, 강동식,"농형유도전동기의 회전자 편심에 따른 특성 분성", 대한전기학회 하계학술대회, pp. 1180-1182, 2006
  5. 김미정, 김병국, 문지우, 조윤현, 황돈하, 강동식 "회전자 편심을 고려한 유도전동기의 특성 해석", 대한전기학회, pp. 1174-1176, 2007
  6. Mi-Jung Kim, Byung-Kuk Kim, Ji-Woo Moon, Yun-Hyun Cho, Don-Ha Hwang, Dong-Sik Kang, "Analysis of PWM vector controlled squirrel cage indection motor during eccentricity rotor motion using FEM" COMPUMAG pp. 1790-1793, 2007
  7. W.T.Thosom and M. Fenger, "Industrial application of current signature analysis to diagnose faults in 3-phase squirrel cage induction motors", Pulp & Paper Industry Technical Conference, pp. 205-211, 2000
  8. O.V.Thorsen and M. Dalva, "Method of condition monitoring and fault diagnosis for induction mototrs", ETEP, vol. 8, no. 5, pp. 383-395, 1998 https://doi.org/10.1002/etep.4450080510
  9. H. A. Toliyat, "A method for dynamic simulation and detection of air-gap eccentricity in induction machines", IEEE Trans. on Industry Applications, vol. 32, no. 4, pp. 910-918, 1996 https://doi.org/10.1109/28.511649
  10. 양보석, 진동신호분석기술을 이용한 유도전동기의 결함분석 및 진단. 인터비젼, 2007
  11. 정병훈, "電流分析을 利用한 誘導電動機의 缺陷 檢出에 關한 硏究", 호서대학교 박사학위 논문
  12. 서종찬, "유도전동기의 고장진단을 위한 진동 및 전류신호 해석", 순천대학교 석사학위 논문
  13. G. B. Kliman, R. A. Koegl, J. Stein, R. D. Endicott and M. W. Madden, "Noninvasive detection of broken rotor bars in operating induction motors", IEEE Trans. Energy Conv. vol. EC-3, no. 4, pp. 873-879, Dec. 1988
  14. A. H. Bonnett, "Cause and analysis of stator and rotor failures in three-phase squirrel-cage induction motors", IEEE Trans. Industry Applications, vol. 28, no. 4, pp. 921-963, 1992 https://doi.org/10.1109/28.148460
  15. C. Yung, A. H. Bonnett, "Repair and replace-a decision model for industrial electric motors", IEEE Industry Applications Magazine, vol. 10, no. 5, pp. 48-58, 2004 https://doi.org/10.1109/MIA.2004.1330770