전기학회논문지P (The Transactions of the Korean Institute of Electrical Engineers P)

  • 제58권4호
  • /
  • Pages.609-614
  • /
  • 2009
  • /
  • 1229-800X(pISSN)
  • /
  • 2586-7792(eISSN)
대한전기학회 (The Korean Institute of Electrical Engineers)
권호 표지

평판형 연료전지 스택의 제조를 위한 매니폴드 형상별 압력분포 시뮬레이션

Pressure Distribution Simulation on Geometrical Manifolds Structure for Fabrication of a Planar-type Fuel-Cell Stack

  • 박세준 (동신대학교 공대 전기공학과) ;
  • 최용성 (동신대학교 공대 전기공학) ;
  • 이경섭 (동신대학교 공대 전기공학)
  • 발행 : 2009.12.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

A fuel-cell power system among various alternative power sources has many advantages such as comparatively independable circumstances, high-efficient, and heat-recyclable, thus it is now able to be up to hundreds MWh-scaled through improving feasibility and longevity of it. During the last few decades, numerous research results has been investigated to expand interest in fuel-cell technology. This study presents pressure distribution on the geometrical manifold structures, which are U-type and Z-type, of a planar-type fuel-cell stack by simulated with computational fluid dynamics(CFD). Then, electrical performance of a 200W fuel-cell stack, which is U-type, was diagnosed after pre-conditioning operation. The stack has electrical characteristics ; 22V, 10A, 220W, and current density $200mA/cm^2$.

키워드

참고문헌

  1. Paolo Agnolucci, "Hydrogen infrastructure for the transport sector", International Journal of Hydrogen Energy, Vol. 32, No. 15, pp 3526-3544 (2007) https://doi.org/10.1016/j.ijhydene.2007.02.016
  2. L. Barreto et al., "The hydrogen economy in the 21st century: a sustainable development scenario", International Journal of Hydrogen Energy, Vol. 28, No. 3, pp. 267-284 (2003) https://doi.org/10.1016/S0360-3199(02)00074-5
  3. Joan M. Ogden et al., "A comparison of hydrogen, methanol and gasoline as fuels for fuel cell vehicles: implications for vehicle design and infrastructure development", Journal of Power Sources, Vol. 79, No. 2, pp. 143-168 (1999) https://doi.org/10.1016/S0378-7753(99)00057-9
  4. W.G. Colella et al., "Switching to a U.S. hydrogen fuel cell vehicle fleet: The resultant change in emissions, energy use, and greenhouse gases", Journal of Power Sources, Vol. 150, No. 4, pp. 150-181 (2005) https://doi.org/10.1016/j.jpowsour.2005.05.092
  5. H. J. Plass Jr et al., "Economics of hydrogen as a fuel for surface transportation", International Journal of Hydrogen Energy, Vol. 15, No. 9, pp. 663-668 (1990) https://doi.org/10.1016/0360-3199(90)90147-Q
  6. Joan M. Ogden, "Developing an infrastructure for hydrogen vehicles: a Southern California case study", International Journal of Hydrogen Energy, Vol. 24, No. 8, pp. 709-730 (1999) https://doi.org/10.1016/S0360-3199(98)00131-1
  7. Birbir, F., "Development of an Air-Open PEM Fuel Cell", SBIR Phase I Final Technical Report, A report by Energy Partners, Inc. to U.S. Army Research Laboratory, contract DAAL01-95-C-3511, pp. 268-302 (1995)
  8. K. Ledjeff et al., New SPFC-Technology with Plastics in O.Savadogo, New Materials for Fuel Cell Systems, pp. 128-134 (1995)
  9. Frano Barbir, PEM Fuel Cells-Theory and Practice, Elsevier Inc., pp. 35-71 (2005)
  10. 조영일 역, 고분자 연료전지공학 이론과 실제, 북스힐, pp. 145-196 (2007)
  11. Joon-Ho Koh et al., "Pressure and flow distribution in internal gas manifolds of a fuel-cell stack", Journal of Power Sources, Vol. 115, No. 1, pp. 54-65 (2003) https://doi.org/10.1016/S0378-7753(02)00615-8
  12. 김응석 외 1인, "고분자 연료전지 발전시스템에 대한 비선형 관측기 설계", 전기학회논문지, Vol. 58, No. 2, pp. 314-321 (2009)
  13. 김종수 외 3인, "PCS 최적설계를 위한 고분자 전해질 연료전지의 동특성 모델링", 전기학회논문지, Vol. 57, No. 9, pp. 1563-1571 (2008)
  14. A. Schmitz et al., "Planar self-breathing fuel cells", Journal of Power Sources, Vol. 118, No. 1-2, pp. 162-171 (2003) https://doi.org/10.1016/S0378-7753(03)00080-6
  15. Sampath Yerramalla et al., "Modeling and simulation of the dynamic behavior of a polymer electrolyte membrane fuel cell", Journal of Power Sources, Vol. 124, No. 1, Pages 104-113 (2003) https://doi.org/10.1016/S0378-7753(03)00733-X