Journal of the Korean Institute of Illuminating and Electrical Installation Engineers (조명전기설비학회논문지)

The Korean Institute of IIIuminating and Electrical Installation Engineers (한국조명전기설비학회)
권호 표지
DOI QR코드

DOI QR Code

Development of New Conveyer Directly Driven by Contact-less Energy Transmission System

  • Park, Hyung-Beom (Division of Electrical, Control Engineering of Pukyong National University) ;
  • Park, Han-Seok (Division of Electrical, Control Engineering of Pukyong National University) ;
  • Woo, Kyung-Il (Division of Electrical, Control Engineering of Pukyong National University)
  • Published : 2009.03.31
Download PDF
⟨ Previous Next ⟩

Abstract

This paper focuses on development of new conveyer directly driven by the contact-less energy transmission system. The effect of the resonant circuit and the flux linkage characteristics caused from that are analyzed by using 3D finite element analysis. From the result it is shown that the resonant circuit needs to transfer energy from the primary core to the secondary core. Also the influence of the linear induction motor on the contact-less energy transmission system is presented. New conveyer and the experimental apparatus was manufactured by using the contact-less energy transmission system and the linear induction motor. Possibility of realization of the conveyer is proved by comparison the simulation result which is obtained by using 2D finite element analysis with experimental one and the characteristic of the voltage and resonant current.

Keywords

References

  1. Jacobus M. Barnard, Jan A. Ferreria, Jacobus Daniel van Wyk, "Sliding Transformer for Linear Contactless Power Delivery", IEEE Transaction on Industrial Electronics, Vol. 44, No. 6, December 1997 https://doi.org/10.1109/41.649938
  2. Dae-Hyun Koo, Pyo-Jung Hong, Yun-Hyun Cho, Koon-Seok Chung, "Design and Simulation of a Contactless Power Transimission System", Automotive Electrical Equipment Optimization of Electronic Equipment, pp. 377-382, Brasov, 2002
  3. D. A. G. Pedder, A. D. Brown and J. A. Skinner, "A Contactless Electrical Energy Transmission System ", IEEE Trans.on Industrial Electronics, Vol. 46, No. 1, pp. 23-30, 1999 https://doi.org/10.1109/41.744372
  4. J. M. Barnard. J. A. Ferreria, J. D. van Wyk, "Optimizing sliding transformers for contactless power transmission systems", IEEE PESC, Vol. 1, pp. 245-251, June 1995
  5. Junji Hirai, Tae-Woong Kim, Atsuo Kawamura, "Study on Crosstalk in Inductive Transmission od Power and Information", IEEE Transactions on Industry Electronics, Vol. 46, No. 6, PP. 1174-1182, Dec. 1999 https://doi.org/10.1109/41.808007
  6. Kyung il Woo, Han-Seok Park, Hyeong-Beom Park, "3D Finite Element Analysis of Contact-less Power Supply with Linear Servo Motor", Journal of the Korean Society of Marine Engineering, Vol. 31, No. 2, pp. 190-196, Mar. 2007 https://doi.org/10.3795/KSME-A.2007.31.2.190