References
- C. K. Dyer, 'Fuel cells for portable applications', J. Power Sources, 106, 31 (2002) https://doi.org/10.1016/S0378-7753(01)01069-2
-
A. Heinzel, C. Hebling, M. M
$\ddot{u}$ ller, M. Zedda, and C. M$\ddot{u}$ ller, 'Fuel cell for low power applications', J. Power Sources, 105, 250(2002) https://doi.org/10.1016/S0378-7753(01)00948-X - S. Shimpalee and J. W. Van Zee, 'Numerical studies on rib & channel dimension of flow-field on PEMFC performance', Int. J. Hydrogen Energy, 32, 842 (2007) https://doi.org/10.1016/j.ijhydene.2006.11.032
- C. H. Cheng, K. Fei, and C. W. Hong, 'Computer simulation of hydrogen proton exchange membrane and direct methanol fuel cells', Computers & Chemical Engineering, 31, 247 (2007) https://doi.org/10.1016/j.compchemeng.2006.06.008
- L. Wang and H. Liu, 'Performance studies of PEM fuel cells with interdigitated flow fields', J. Power Sources, 134, 185 (2004) https://doi.org/10.1016/j.jpowsour.2004.03.055
- S. S. Hsieh, S. H. Yang, J. K. Kuo, C. F. Huang, and H. H. Tsai, 'Study of operational parameters on the performance of micro PEMFCs with different flow fields', Energy conversion & Management, 47, 1868 (2006) https://doi.org/10.1016/j.enconman.2005.10.011
- S. Shimpalee, S. Greenway, and J. W. Van zee, 'The impact of channel path length on PEMFC flow-field design', J. power source, 160, 398 (2006) https://doi.org/10.1016/j.jpowsour.2006.01.099
- K. Tuber, A. Oedegaard, M Hermann, and C. Hebling, 'Investigation of fractal flow-fields in proton exchange membrane and direct methanol fuel cells', J. power source, 131, 175 (2004) https://doi.org/10.1016/j.jpowsour.2003.11.078
- X. Zhou, W. Ouyang, C. Liu, T. Lu, W. Xing, and L. An, 'A new flow field and its-two dimension model for polymer electrode membrane fuel cells (PEMFCs)', J. Power Sources, 158, 1209 (2006) https://doi.org/10.1016/j.jpowsour.2005.10.025
- X. Li and I. Sabir, 'Review of bipolar plates in PEM fuel cells: Flow-field designs', Int. J. Hydrogen Energy 30, 359 (2005) https://doi.org/10.1016/j.ijhydene.2004.09.019
- A. S. Arico, P. Creti, V. Baglio, E. Modica, and V. Antonucci, 'Influence of flow field design on the performance of a direct methanol fuel cell', J. Power Sources, 91, 202 (2000) https://doi.org/10.1016/S0378-7753(00)00471-7
- V. A. Danilov, J. Lim, I. Moon, and H. Chang, 'Threedimensional, two-phase, CFD model for the design of a Adirect methanol fuel cell', J. Power Sources, 162, 992 (2006) https://doi.org/10.1016/j.jpowsour.2006.07.071
- G. Squadrito, O. Barbera, G. Giacoppo, F. Urbani, and E. Passalacqua, 'Computer aided fuel cell design and scale-up, comparison between medel and experimental results', J. Applied Electrochemistry, 37, 87 (2007) https://doi.org/10.1007/s10800-006-9206-z
- G. O. Mepsted and J. M. Moore, 'Performance and durability of bipolar plate materials', W. Vielstich, A. Lamm and H. A. Gasteiger (Eds.), 'Handbook of Fuel Cells: Fundamentals Technology and Applications', Vol. 3, 286, John Wiley & Sons, New York (2003)
- W. M. Yan, C. Y. Chen, C. C. Mei, C. Y. Soong, and F. Chen, 'Effects of operating conditions on cell performance of PEM fuel cells with conventional or interdigitated flow field, J. Power Sources', 162, 1157 (2006) https://doi.org/10.1016/j.jpowsour.2006.07.044
- Y. -H. Cho, H. -S. Park, Y. -H. Cho, D. -S. Jung, H. -Y. Park, and Y. -E. Sung, 'Effect of platinum amount in carbon supported platinum catalyst on performance of polymer electrolyte membrane fuel cell' J. Power Sources 172, 89 (2002) https://doi.org/10.1016/j.jpowsour.2007.01.067
- R. O'Hayre, S. W. Cha, W. Colella, and F. B. Prinz, 'Fuel Cell Fundamentals', 146-166, John Wiley & Sons, New York (2006)
- F. Babir, 'PEM Fuel Cells: Theory and Practice', 55, Elsevier Academic Press, Burlington (2005)
Cited by
- High-capacity zinc-ion storage in an open-tunnel oxide for aqueous and nonaqueous Zn-ion batteries vol.4, pp.48, 2016, https://doi.org/10.1039/C6TA07747A