산업경영시스템학회지 (Journal of Korean Society of Industrial and Systems Engineering)

  • 제32권1호
  • /
  • Pages.34-43
  • /
  • 2009
  • /
  • 2005-0461(pISSN)
  • /
  • 2287-7975(eISSN)
한국산업경영시스템학회 (Society of Korea Industrial and System Engineering)
권호 표지

지게차 전용 동력전달시스템의 설계 및 개발에 관한 연구

A Study on the Design and Development of the Power Transmission System for Lift Truck

  • 장경열 (인천대학교 산업경영공학과) ;
  • 박중순 (우영유압(주) 기술연구소) ;
  • 유우식 (인천대학교 산업경영공학과)
  • Jang, Kyoung-Yeol (Department of Industrial and Management Engineering, University of Incheon) ;
  • Park, Joong-Sun (R&D Center, Wooyoung Hydraulics Corporation) ;
  • Yoo, Woo-Sik (Department of Industrial and Management Engineering, University of Incheon)
  • 발행 : 2009.03.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this thesis, we explain developing processes of the power transmission system for lift truck. Conventional power transmission system had some problems such as spatial constraints or low speed and high torque problem. Because conventional power transmission system was mainly designed for high speed vehicles. In this paper we developed power shift drive axle specialized for $2.0{\sim}3.5$ ton lift truck. Innovative structure of transmission which is built in inside axle, enables to reduce system weight and size by 40% compared to the conventional power transmission system. Also, it is possible to do additional functions such as auto parking system and anti-roll back system.

키워드

참고문헌

  1. 김정준, 임채홍; “동력전달장치 개요”, 오토저널, 29(5) : 18-23, 2007
  2. 이주호, 유한종, 최형우, 이승구; “산업차량 설계의 최적화”, 자동차공학회지, 15(5) : 1-7, 1993
  3. 이형복, 한문식, 김영철, 최인근; 자동차설계학, 원창출판사, 313-317, 1998
  4. 김재휘; 자동차새시, 중원사, 169-172, 1997
  5. 장경열, 박중순, 유우식; “지게차용 동력전달장치의 개발 사례연구”, 대한산업공학회 2007년도 추계학술대회 발표논문집, 건국대학교 산학협동관, 서울, 1031-1052, 2007
  6. 유홍의, 박근배, 신상호, 김태일; “지게차량 제동장치 시스템 강도설계를 위한 주요 내력 계산 프로시져 개발”, 한국자동차공획회논문집, 5(5) : 27-36, 1997
  7. 日本 自動車 技術會 編輯部, 自動車 工學 技術 大辭典, 科學技術, 199-205, 1996