Journal of Welding and Joining

  • 제27권6호
  • /
  • Pages.62-67
  • /
  • 2009
  • /
  • 2466-2232(pISSN)
  • /
  • 2466-2100(eISSN)
대한용접접합학회 (The Korean Welding and Joining Society)
권호 표지
DOI QR코드

DOI QR Code

Al-Mg-Si계 알루미늄 합금 판재 마찰교반접합부의 결정 방위 분포에 대한 용접후열처리의 영향

Effect of Post Weld Heat Treatment for Crystal Orientation Distribution on Friction Stir Welds of Al-Mg-Si Series Aluminum Alloy Sheets

  • 발행 : 2009.12.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Friction stir welding (FSW) was carried out for Al-Mg-Si series aluminum alloys which are being used for automotive body structure. Consequently, Post weld heat treatment (PWHT) was applied to the friction stir welds to evaluate the effect of the paint baking process which is one of the automotive fabrication process on friction stir welded zone (FSWZ) in 443K for 1.2Ks. Grain structure and its crystal orientation distribution was measured about both the as welded specimens and the post weld heat treated specimens. An optical microscope (OM) and an field emission scanning electron microscope (FE-SEM) was used for observing the grain structure and measuring its crystal orientation distribution, respectively. Changes on the grain structure and its crystal orientation distribution were not detected. From the present results, it was confirmed that the paint baking process after FSW do not affect on the grain structure and its crystal orientation distribution of FSWZ. The comprehensive investigations will be performed for various automotive aluminum alloys manufactured by different processes, in the future.

키워드

참고문헌

  1. Moataz M. Attallah and Hanadi G. Salem ; Friction stir welding parameters, Mater Sci. Eng. A, 391 (2005), 51-59 https://doi.org/10.1016/j.msea.2004.08.059
  2. P. Bala Srinivasan, W. Dietzel, R. Zettler, J. F. dos Santos and V. Sivan ; Stress corrosion cracking susceptibility of friction stir welded AA7075-AA6056 dissimilar joint, Mater Sci. Eng. A, 392(2005), 292-300 https://doi.org/10.1016/j.msea.2004.09.065
  3. M. Peel, A. Steuwer, M. Preuss and P. J. Withers ; Microstructure, mechanical properties and residual stress as a function of welding speed in aluminum AA5083 friction stir welds, Acta Mater., 51(2003), 4791-4801 https://doi.org/10.1016/S1359-6454(03)00319-7
  4. Y. S. Sato, H. Kokawa, K. Ikeda, M. Enomoto, S. Jogan and T. Hashimoto ; Microstructure in the friction stir weld of an aluminum alloy, Metal. and mater. Trans. A, 32(2001), 941-948 https://doi.org/10.1007/s11661-001-0351-z
  5. R. W. Fonda, J. F. Bingert and K. J. Colligan ; Development of grain structure during friction stir welding, Scripta Mater., 51(2004), 243-248 https://doi.org/10.1016/j.scriptamat.2004.04.017
  6. K. V. Java and S. L. Semiatin ; Continuous dynamic recrystallization during friction stir welding of high strength aluminum alloy, Scripta Mater., 43(2000), 743-749 https://doi.org/10.1016/S1359-6462(00)00480-2
  7. Y.S. Sato, Y. Kurihara, S.H.C. Park, H. Kokawa and N. Tsuji ; Friction stir welding of ultrafine grained Al alloy 1100 produced by accumulative roll-bonding, Scripta Mater., 50(2004), 57-60 https://doi.org/10.1016/j.scriptamat.2003.09.037
  8. S. Lathabai, M. J. Painter, G.M.D. Cantin and V.K. Tyagi ; Friction spot joining of an extruded Al-Mg-Si alloy, Scripta Mater., 55(2006), 899-902 https://doi.org/10.1016/j.scriptamat.2006.07.046
  9. K. Nakata, Y.G. Kim, H. Fujii, T. Tsumura and T. Komazaki ; Improvement of mechanical properties of aluminum die casting alloy by multi-pass friction stir processing, Mater Sci. Eng. A, 437(2006), 274-280 https://doi.org/10.1016/j.msea.2006.07.150
  10. Y.S. Sato, H. Yamanoi, H. Kokawa and T. Fukuhara ; Microstructural evolution of ultrahigh carbon steel during friction stir welding, scripta Mater., 57(2007), 557-560 https://doi.org/10.1016/j.scriptamat.2007.04.050