References
- I. J. Polmear: "Light Alloys, 3rd edition", Arnold Press (1995) 168-184
- N. C. W. Kuijpers, J. Tirel, D. N. Hanlon and S. van der Zwaag: Mater. Charact., "Qualification of the evolution of the 3D intermetallic structure in a 6005A aluminum alloy during a homogenization treatment", 48 (2002) 379-392 https://doi.org/10.1016/S1044-5803(02)00289-9
- G. Sha, K. O'Reilly, B. Cantor, J. Worth and R. Hamerton: Mater. Sci. Eng. A, "Growth related metastable phase selection in a 6xxx series wrought Al alloy", 304-306 (2001) 612-616 https://doi.org/10.1016/S0921-5093(00)01545-8
- N. C. W. Kuijpers, F. J. Vermolen, C. Vuik and S. van der Zwaag: Materials Forum, "Predicting the effect of alloy composition on the intermetallic phase transformation kinetics in 6xxx extrusion alloys", 28 (2004) 1040-1045
- J. A. Taylor: Proc. of 35th Australian Foundry Institute National Conference, "The effect of iron in Al-Si casting alloys", (2004) 148-157
-
S. Seifeddine, S. Jhansson and I. L. Svensson: Mater. Sci. Eng. A, "The influence of cooling rate and manganese content on the
$\beta$ -Al5FeSi phase formation and mechanical properties of Al-Si-based alloys", 490 (2008) 385-390 https://doi.org/10.1016/j.msea.2008.01.056 -
X. Ma, A. M. Samuel, F. H. Samuel, H. W. Doty and S. Valtierra: Mater. Sci. Eng. A, "A study of tensile properties in Al-Si-Cu and Al-Si-Mg alloys: Effect of
$\beta$ -iron intermetallic and porosity", 490 (2008) 36-51 - J. Wang, P. D. Lee, R. W. Hamilton, M. Li and J. Allison: Scr. Mater., "The kinetic of Fe-rich intermetallic formation in aluminium alloys: In situ observation", 60 (2009) 516-519 https://doi.org/10.1016/j.scriptamat.2008.11.048
- S. G. Shabestari and S. Ghodrat: Mater. Sci. Eng. A, "Assessment of modification and formation of intermetallic compounds in aluminum alloy using thermal analysis", 467 (2007) 150-158 https://doi.org/10.1016/j.msea.2007.05.022
- C. M. Dinnis, J. A. Taylor and A. K. Dahle: Scr. Mater., "Ascast morphology of iron-intermetallics in Al-Si foundry alloys", 53 (2005) 955-958 https://doi.org/10.1016/j.scriptamat.2005.06.028
- P. Ashtari, H. Tezuka and T, Sato: Scr. Mater., "Modification of Fe-containing intermetallic compounds by K addition to Fe-rich AA319 aluminum alloys", 53 (2005) 937-942 https://doi.org/10.1016/j.scriptamat.2005.06.022
- J. K. Lee, C. S. Park and M. H. Kim: J. Kor. Foundrymen's Soc., "Beryllium effects on the morphology of iron intermetallics in the A356 aluminium casting alloy", 18(4) (1998) 357-363
- S. W. Han: J. Kor. Foundrymen's Soc., "The effects of Mn and Cr additions on the microstructure of A356 alloys containing impure Fe", 25(3) (2005) 128-133
- J. Y. Hwang, H. W. Doty and M. J. Kaufman: Mater. Sci. Eng. A, "The effects of Mn additions on the microstructure and mechanical properties of Al-Si-Cu casting alloys", 488 (2008) 496-504 https://doi.org/10.1016/j.msea.2007.12.026
- P. Ashtari, H. Tezuka and T, Sato: Scr. Mater., "Influence of Li addition on intermetallic compound morphologies in Al-Si-Cu-Fe cast alloys", 51 (2004) 43-46 https://doi.org/10.1016/j.scriptamat.2004.03.022
- V. Raghavan: J. Phase Equilib. and Diffusion, "Al-Fe-Mn-Si (Aluminum-Iron--Manganese-Silicon)", 28(2) (2007) 215-217 https://doi.org/10.1007/s11669-007-9034-9
- B.H. Kim and S.M. Lee: J. Kor. Foundrymen's Soc., "Magnetic separation of Fe contaminated Al-Si cutting chip scraps and evaluation of solidification characteristics", 29(1) (2009) 38-44
- V. Raghavan: J. Phase Equilib. and Diffusion, "Al-Fe-Si (Aluminum-Iron-Silicon)", 30(2) (2009) 184-188 https://doi.org/10.1007/s11669-009-9486-1