DOI QR코드

DOI QR Code

Al/SiCp 복합재료의 마모거동에 미치는 MML의 영향

Effect of MML on the Wear Behavior of Al/SiCp Composites

  • Kim, Yeong-Sik (School of Mechanical Engineering, Pukyong National University) ;
  • Kim, Kyun-Tak (School of Mechanical Engineering, Pukyong National University)
  • 발행 : 2009.02.28

초록

Al-based composites reinforced with SiC particulate were fabricated using a thermal spray process, and dry sliding wear behavior of the composites was investigated. Pre-mixed Al and SiC powders were sprayed on an A16061 substrate by flame spraying, and dry sliding wear test were performed under various sliding speed and applied load conditions against ${Al_2}{O_3}$ ball. Wear behavior of the composites was studied by using scanning electron microscope (SEM), energy dispersive X-ray spectroscopy (EDX) and X-ray diffraction (XRD). And build-up mechanism of MML on the worn surface of the composites was examined. It was revealed that these MML was formed of debris from the contact surface of the composites and effected to wear behavior of the composites protecting the contact surface of the composites.

키워드

참고문헌

  1. Gul, F. and Acilar, M., ' Effect of the Reinforcement Volume Fraction on the Dry Sliding Wear Behaviour of Al-l0Si/SiCp Composites Produced by Vacuum Infiltration Technique', Composites Science and Technology, Vol. 64, Issues 13-14, pp. 1959-1970, 2004. https://doi.org/10.1016/j.compscitech.2004.02.013
  2. Assar, E. M. and AI-Nimr, M. A., ' Fabrication of Metal Matrix Composite by Infiltration Process-part 1: Modeling of Hydrodynamic and Thermal Behavior', J of Composite Materials, Vol. 28, No. 15, pp. 1480-1490, 1994 https://doi.org/10.1177/002199839402801506
  3. Gopalakrishnan, M.Y., Metzgar, K., Rosetta, D., and Krishnamurthy, R., ' Structural Characterisation and Strength Evaluation of Spray Formed Ceramic Composite Near-net Shapes', J of Materials Processing Technology, Vol. 135, Issues 2-3, pp. 228-234, 2003 https://doi.org/10.1016/S0924-0136(02)00900-7
  4. Lai, S. W. and Chung, D. D. L., ' Fabrication of Particulate Aluminium-matrix Composites by Liquid Metal Infiltration', J. of Materials Science, Vol. 29, No. 12, pp. 3128-3150, 1994 https://doi.org/10.1007/BF00356655
  5. Assar, E. M., ' Fabrication of Meta1 Maπix Composite by Infiltration Process-part 2: Experimental Study', J. of Materials Processing Technology, Vol. 86, Issues 1-3, pp. 152-158, 1999 https://doi.org/10.1016/S0924-0136(98)00304-5
  6. Riahi, A. R. and Alpas, A. R., ' The Role of Tribolayers on the Sliding Wear Behaviour of Graphitic Aluminum Matrix Composites', Wear, Vol. 251, Issues 1-12, pp. 1396-1407, 2001 https://doi.org/10.1016/S0043-1648(01)00796-7
  7. Rosenberger, M. R., Forlerer, E., and Schvezov, C. E., ' Wear of Different Aluminum Matrix Composites under Conditions that Generate a Mechanically Mixed Layer', Wear, Vol. 259, issues 1-6, pp. 590- 601 , 2005 https://doi.org/10.1016/j.wear.2005.02.003
  8. Sannino, A. P. and Rack, H. J., 'Dry Sliding Wear of Discontinuously Reinforced Aluminum Composites: Review and Discussion', Wear, Vol. 189, Issues 1-2, pp. 1-19, 1995 https://doi.org/10.1016/0043-1648(95)06657-8
  9. Kim, Y. S. and Kim, K. T., ' Wear Behavior of SICp Reinforced Metal Matrix Composites Fabricated by Thermal Spray Process', Key Engineering Materials, Vol. 326-328, pp. 1845-1848, 2006.
  10. Alpas, A. T. and Zhang, J., 'Effect of Microstructure (Particulate Size and Volume Fraction) and Counterface Material on the Sliding Wear Resistance of Particulate-reinforced Aluminum Matrix Composites', Metallurgical and Materials Transactions A, Vol. 25, No. 5, pp. 969-983, 1994 https://doi.org/10.1007/BF02652272