Tribology and Lubricants

Korean Tribology Society (한국트라이볼로지학회)
권호 표지
DOI QR코드

DOI QR Code

CFD Analysis of an Infinitely Long Slider Bearing with Two-Dimensional micro-Pockets

2차원 미세 포켓이 있는 무한장 Slider Bearing의 CFD 해석

  • Park, Tae-Jo (School of Mechanical & Aerospace Engineering, ERI, Gyeongsang National University) ;
  • Hwang, Yun-Geon (Graduate School, Dept. of Mechanical & Aerospace Engineering, Gyeongsang National University) ;
  • Sohn, Ja-Deok (Doosan Mottrol Co,. Ltd) ;
  • Chung, Ho-Gyeong (Doosan Mottrol Co,. Ltd)
  • Published : 2009.02.28
Download PDF
⟨ Previous Next ⟩

Abstract

It is reported by many researchers that the textured bearing surfaces, where many tiny micro-pockets or enclosed recesses were incorporated, can enhance the load support and reduce friction force. Recently, the basic lubrication mechanism of micro-pocketed parallel surfaces are explained in terms of "inlet suction" using continuity equation and simply cavitation condition. However, it is required that more actual cavitation condition in the pocket region should be applied to estimate exact bearing performance. In this paper, a commercial computational fluid dynamics (CFD) code, FLUENT is used to investigate the exact lubrication characteristics of infinitely long slider bearing with micro-pockets. The results show that the pressure distributions are highly affected by pocket depths, its positions and numbers. The numerical method adopted in this paper and results can be use in optimal design of textured sliding bearings.

Keywords

References

  1. Cameron, A., Basic Lubrication Theory, Longman Green, 1981
  2. Etsion, I., ' Improving Tribological Performance of Mechanical Components by Laser Surface Texturing', Tribology Letters, Vol. 17, pp. 733-737, 2004 https://doi.org/10.1007/s11249-004-8081-1
  3. Etsion, I., ' State of the Art in Laser Surface Texturing', J of Tribology, Vol. 127, pp. 248-253, 2005 https://doi.org/10.1115/1.1828070
  4. Olver, A. V., Fowell, M. T., Spikes, H. A. and Pegg, I. G., ' Inlet Suction', a Load Support Mechanism in Non-convergent, Pocketed, Hydrodynamic Bearings', Proc. IMechE, J of Eng. Tribology, Vol. 220, pp. 105-108, 2006 https://doi.org/10.1243/13506501JET168
  5. Fowell, M., Olver, A. V., Gosman, A .D., Spikes, H. A. and Pegg, I., ' Entrainment and Inlet Suction: Two Mechanisms of Hydrodynamic Lubrication in Textured Bearings', Trans. ASME, J of Tribology, Vol. 129, pp. 221-230, 2007 https://doi.org/10.1115/1.2540156
  6. Dzodzo, M., Braun, M. J. and Hendricks, R. C., 'Pressure and Flow Characteristics in a Shallow Hydrostatic Pocket with Rounded PocketILand Joints', Tribology Int., Vol. 29, pp. 69-76, 1996 https://doi.org/10.1016/0301-679X(95)00036-4
  7. Chen, P. Y. P. and Hahn, E. J., 'Use of Computational Fluid Dynamics in Hydrodynamic Lubrication', Proc. IMechE，Vol. 212, pp. 427-436, 1998
  8. Helene, M., Arghir, M. and Frene, J., ' Numerical Study of the Pressure Pattem in a Two-Dimensional Hybrid Joumal Bearing Recess, Laminar, and Turbulent Flow Results', Trans. ASME, J of Tribology, Vol. 125, pp. 283-290, 2003 https://doi.org/10.1115/1.1537233
  9. Brajdic-Mitidieri, P., Gosman, A. D., Ioannnides, E. and Spikes, H. A., 'CFD Analysis of a Low Friction Pocketed Pad Bearing,' Trans. ASME, J of Tribology, Vol. 127, pp. 803-812, 2005 https://doi.org/10.1115/1.2032990
  10. 유재찬，박태조，정호경，' 사판식 유압 피스톤 펌프용 Slipper Bearing내의 유동해석', 한국윤활학회춘계학술대회논문집， pp. 259-263, 2007
  11. 박태조，황윤건，박경택，'유압 Spool valve의 Groove 형상에 따른 윤활특성 해석', 한국윤활학회 추계학술대회논문집， pp. 150-156, 2007
  12. 박태조，'유압 Spool valve Groove내에서의 유동특성 해석', 유공압시스템학회지， 제 4권， 제 4호， pp.45-20, 2007
  13. 유재찬，박태조，손자덕，정호경，'포켓 형상에 따른 무한장 Slider Bearing91 윤활특성 해석', 한국정밀공학회 추계학술대회논문집， pp. 101-102, 2007.
  14. FLUENT, 'FLUENT 6.0 Manua', 2002
  15. Kim, J. S., and Kim, K. w., ' Effects of Distance Between Pads on the Inlet Pressure Build-up on Pad Bearings', Trans. ASME, J Tribology, Vol. 124, pp. 506-514, 2002. https://doi.org/10.1115/1.1456452

Cited by

  1. Laser Texturing한 평행 스러스트 베어링의 윤활특성 : 제2보 - 딤플 위치의 영향 vol.26, pp.1, 2009, https://doi.org/10.9725/kstle.2010.26.1.001