References
- 이문주, 최성근, 추현욱, 조용순, 이우진 (2008a), "낙사법으로 조성된 대형 석고 고결시료의 균질성", 한국지반공학회논문집, Vol.24, No.1, pp.91-99
- 이문주, 최성근, 추현욱, 이우진 (2008b), "고결모래의 콘선단저항과 변형계수의 관계", 한국지반공학회논문집, Vol.24, No.12, pp.53-63
- Akili, W., and Torrance, J.K. (1981), "The development and geotechnical problems of sabkha, with preliminary experiments on the static penetration resistance of cemented sands", Quarterly Journal of Engineering Geology and Hydrogeology, Vol.14, No.1, pp.59-73 https://doi.org/10.1144/GSL.QJEG.1981.014.01.05
- Pasqualini, E. (1981), "Cone resistance of a dry medium sand", Proceedings of the 10th International Conference on Soil Mechanics and Foundation Engineering, Stockholm, Vol.2, pp.427-432
- Baldi, G., Bellotti, R., Ghionna, V.N., Jamiolkowski, M., and Lo Presti, D.F.C. (1988), "Modulus of sands from CPTs and DMTs", Proceedings of the 12th International Conference on Soil Mechanics and Foundation Engineering, Rio de Janeiro, Vol.1, pp.165-170
- Been, K., Crooks, J.H, Becker, D.E., and Jefferies, M.G. (1986), "The cone penetration test in sand: part I, state parameter interpretation", Geotechnique, Vol.36, No.2, pp.239-249 https://doi.org/10.1680/geot.1986.36.2.239
- Bellotti, R., Benoit, J., Fretti, C., and Jamiolkowski, M. (1997), "Stiffness of Toyoura sand from dilatometer tests" Journal of Geotechnical and Geoenvironmental Engineering, ASCE, Vol.123, No.9, pp.836-846 https://doi.org/10.1061/(ASCE)1090-0241(1997)123:9(836)
- Borden (1991), "Boundary displacement induced by DMT penetration", Proceedings of the International Symposium on Calibration Chamber Testing, Postdam, NewYork, pp.101-118
- Campanella, R.G., and Robertson, P.K. (1991), "Use and interpretation of a research dilatometer", Canadian Geotechnical Journal, Vol.28, No.1, pp.113-126 https://doi.org/10.1139/t91-012
- Choi, S.K. (2008), Estimation of stress history of sands using CPT and DMT, Ph.D. thesis, Korea University
- Cruz, N., and Fonseca, A.V. (2006), "Portuguese experience in residual soil characterization by DMT tests", Proceeding of 2nd International Conference on the Flat Dilatometer, Washington, D.C., pp.359-364
- Douglas, B.J., and Olsen, R.S. (1981), "Soil classification using electric cone penetrometer", Symposium on cone Penetration Testing and Experience, ASCE, St. Louis, pp.209-227
- Fonseca, A.V., Silva, S.R., and Cruz, N. (2008), "Geotechnical characterization by in situ and lab tests to the back-analysis of a supported excavation in Metro do Porto", Geotechnical and Geological Engineering, Published online
- Jamiolkowski, M., Ladd, C.C., Germaine, J.T., and Lancellotta, R. (1985), "New Developments in Field and Laboratory Testing of Soils", Proceedings of the 11th International Conference on Soil Mechanics and Foundation Engineering, San Francisco, pp.57-153
- Jamiolkowski, M., Lo Presti, D.C.F., and Manassero, M. (2003), "Evaluation of relative density and shear strength of sands from CPT and DMT", Soil Behavior and Soft Ground Construction, ASCE GSP 119, pp.201-238
- Jamiolkowski, M., Ghionna, V. N., Lancellotta, R., and Pasqualini, E. (1988), "New correlation of penetration tests for design practice" Proceedings of the 1st International Symposium on Penetration Testing, Orlando, Florida, Vol.2, pp.263-296
- Joshi, R.C., Achari, G., Kaniraj, S.R., and Wijeweera, H. (1995), "Effect of aging on the penetration resistance of sands", Canadian Geotechnical Journal, Vol.32, pp.767-782 https://doi.org/10.1139/t95-075
- Kim, T.J. (2005), Dissipation of porewater pressure due to piezocone penetration in OC clay, Ph.D. dissertation, Korea University
- Marchetti, S. (1980), "In situ tests by flat dilatometer", Journal of Geogechnical Engineering Division, ASCE, Vol.106, No.GT3, pp.299-321
- Marchetti, S. (1985), "On the field determination of K0 in sand", Proceedings, 11th International Conference on Soil Mechanics and Foundation Engineering, San Francisco, Vol.5, pp.2667-2672
- Marchetti, S., Monaco, P., Totani,G., and Calabrese, M. (2001), "The flat dilatometer test (DMT) in soil investigations", A Report by the ISSMGE Committee TC16, International Conference on In Situ Measurement of Soil Properties, Bali, Indonesia
- Puppala, A.J., Acar, Y.B., and Tumay, M.T. (1995), "Cone penetration in very weakely cemented sand", Journal of Geotechnical Engineering, ASCE, Vol.121, No.8, pp.589-600 https://doi.org/10.1061/(ASCE)0733-9410(1995)121:8(589)
- Rad, N.S., and Tumay, M.T. (1986), "Effect of cementation on the cone penetration resistance of sand", Use of In Situ Tests in Geotechnical Engineering, GSP 6, ASCE, New York, pp.926-948 https://doi.org/10.1520/GTJ10617J
- Robertson, P.K., Campanella, R.G., Gillespie, D., and Grieg, J. (1986), "Use of piezometer cone data", Proceedings of In-Situ '86, ASCE, Specialty Conference, Blacksburg, VA
- Salgado, R., Mitchell, J.K., and Jamiolkowski, M. (1998), "Calibration chamber size effects on penetration resistance in sand", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, Vol.124, No.9, pp.878-888 https://doi.org/10.1061/(ASCE)1090-0241(1998)124:9(878)