Abstract
In this paper, we design and fabricate a disk sector antenna fed by CPW fur UWB communications. Also, we insert a rectangular slit on the arc-edge of the disk sector antenna. Then, the antenna has the directivity of E-면. In order to design the antenna, the input impedance is matched with the feed line of $50{\Omega}$ as varying the physical antenna parameters, which are the radius, the flare angle of disk sector, the length of ground, and the length of ground comer near by feed tine. Dimension of the antenna designed for UWB communication is $72mm{\times}26mm$ and bandwidth through computer simulation is $3{\sim}13GHz$. From the measured results, the bandwidth is $1.98{\sim}11GHz$. Return loss and gain of the fabricated antenna are -50.38dB, 1.34dBi at 3.5GHz, -12.27dB, 3.35dBi at 5.5GHz, -23.2dB, 3.8dBi at 8GHz and -16.17dB, 5.2dBi at 10GHz, respectively.
본 논문에서는 UWB 통신용 CPW 급전 디스크 섹터 안테나를 설계하고 제작한다. 또한 디스크 섹터 안테나의 부채꼴에 사각형 슬릿을 삽입하여 E-평면에서 방향성을 갖도록 하였다. 안테나의 입력 임피던스는 안테나를 구성하는 파라미터인 디스크 섹터의 반경, 디스크 섹터의 중심각, 접지면의 길이와 급전선 부근의 접지면 모서리의 길이를 변화시켜서 $50{\Omega}$을 갖는 급전선과 정합시켰다. 설계된 UWB 통신용 안테나의 크기는 $72mm{\times}26mm$이고, 시뮬레이션을 통한 안테나의 대역폭은 $3{\sim}13GHz$이다. 측정결과로부터 대역폭은 $1.98{\sim}11GHz$이고 제작된 안테나의 반사손실과 이득은 3.5GHz에서 -50.88dB, 1.34dBi, 5.5GHz에서 -12.27dB, 3.35dBi, 8GHz에서 -23.2dB, 3.8dBi이고 10GHz에서 -16.17dB, 5.2dBi를 갖는다.