참고문헌
- Ruhl, R. L. and Booker, J. F., 1972, “A Finite Element Model for Distributed Parameter Turborotor Systems,” Journal of Engineering for Industry, Trans. ASME, pp. 126~132
- Yee, Eric K. L. and Tsuei, Y. G., 1990, “Transient Response by Component Modal Synthesis Method”, Journal of Vibration and Acoustics, Trans. ASME, Vol. 112, pp. 21~25 https://doi.org/10.1115/1.2930092
- Nelson, H. D. and Meacham, W. L., 1983, “Nonlinear Analysis of Rotor-bearing Systems Using Component Mode Synthesis”, Journal of Engineering for Power, Trans. ASME, Vol. 105, pp. 606~614 https://doi.org/10.1115/1.3227460
- Guyan, R. J., 1965, “Reduction of Stiffness and Mass Matrices”, American Institute of Aeronautics and Astronautics Journal, Vol. 3, No. 2, p. 380 https://doi.org/10.2514/3.2874
- Nelson. H. D. and McVaugh. J. M., 1976, “Dynamics of Rotor-bearing Systems Using Finite Elements,” J. Eng. For Industry, Trans. ASME, pp. 593~600
- Ozguven, H. N. and Z. L. Ozkan., 1984, “Whirl Speeds and Unbalance Response of Mechanical Bearing Rotors Using Finite Elements,” J. of Vibration Acoustics, Stress and Reliability in Design, Trans. ASME. Vol. 106, pp. 72~79 https://doi.org/10.1115/1.3269158
- Rahman, B. S. and Lieu, D. K., 1991, “The Origin of Permanent Magnet Induced Vibration in Electric Machines”, J. of Vibration and Acoustics, Trans. ASME, Vol. 113, p. 476 https://doi.org/10.1115/1.2930211
- Houbolt, J. C., 1950, “A Recurrence Matrix Solution for the Dynamic Response of Elastic Aircraft”, Journal of the Aeronautical Sciences, Vol. 17, pp. 540~550 https://doi.org/10.2514/8.1722
- Subbiah, R. and Kumar, A. S., 1988, “Transient Dynamic Analysis of Rotors Using the Combined Methodologies of Finite Elements and Transfer Matrix,” Journal of Applied Mechanics, Trans. ASME, Vol. 55, pp. 448~452 https://doi.org/10.1115/1.3173697
- Kumar, A. S. and Sankar, T. S., 1986 , “A New Transfer Matrix Method for Response Analysis of Large Dynamic Systems,” Computer and Structures, Vol. 23, No. 4, pp. 545~552 https://doi.org/10.1016/0045-7949(86)90097-0
- Choi, M.-S., Moon, D.-H. and Kim, S.-J., 2002, “Transient Response Analysis of Frame Structures Using the Finite Element-transfer Stiffness Coefficient Method,” Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 12, No. 9, pp. 674~684 https://doi.org/10.5050/KSNVN.2002.12.9.674
- Cao, Y., 2006, “Modeling of High-speed Machine Tool Spindle Systems,” Ph. D. Thesis, The University of British Columbia
- Wang, K. F., Shin, Y. C. and Chen, C. H., 1991, “On the Natural frequencies of High-speed Spindles with Angular Contact Bearings,” Proc. Inst. Mech. Eng., Part C: J. Mech. Eng. Sci., 205, Issue C3 pp. 147~154 https://doi.org/10.1243/PIME_PROC_1991_205_105_02
- Shin, Y. C., 1992, “Bearing Nonlinearity and Stability Analysis in High Speed Machining,” ASME, J. Eng. Sci. Ind., Vol. 114, No. 1, pp. 23~30