참고문헌
- Darveaux, R. and Mawer, A., 1995, 'Thermal and Power Cycle Limit of Plastic Ball Grid Array (PBGA) Assemblies,' Proc. Surface Mount Int. Conf., pp. 315-326
- Skipor, A. F., Harren, S.V. and Botsis, J., 1996, 'On the Constitutive Response of 63/37 Sn/Pb Eutectic Solder,' ASME. J. Eng. Mater. Technol., Vol. 118, pp. 1-11 https://doi.org/10.1115/1.2805929
- Lee, T., Lee, J. and Jung, I., 1998, 'Finite Element Analysis for Solder Ball Failures in Chip Scale Packages,' Microelectronics and Reliability, Vol.38, No. 12, pp. 1941-1947 https://doi.org/10.1016/S0026-2714(98)00163-2
- Pang, J. H. L, Chong, D. Y. R and Low, T. H., 2001, 'Thermal Cycling Analysis of Flip-Chip Solder Joint Reliability,' IEEE Trans. Comp. & Pack. Technol. Vol. 24, No. 4, pp. 705-712 https://doi.org/10.1109/6144.974964
- Chen, S. C., Lin, Y. C. and Cheng, C. H., 2006, The Numerical Analysis of Strain Behavior at the Solder Joint and Interface in a Flip Chip Package,' J. Materials Processing Technology, Vol. 171, pp. 125-131 https://doi.org/10.1016/j.jmatprotec.2005.06.061
- Joo, J. and Cho, S., 2004, 'Evaluation of thermal Deformation Model for BGA Packages Using Moire Interferometry,' KSME International Journal, Vol. 14, No. 2, pp. 230-239
- Joo, J. W., Cho, S. and Han, B., 2005, 'Characterization of Flexural and Thermo mechanical Behavior of Plastic Ball Grid Package Assembly Using Moire Interferometry,' Microelectronics Reliability, Vol. 45, Iss. 4, pp. 637-646 https://doi.org/10.1016/j.microrel.2004.10.006
- Han, B., 1998, 'Recent Advancements of Moire and Microscopic Moire Interferometry for Thermal Deformation Analysis of Microelectronics Devices,' Experimental Mechanics, Vol.38, No.4, pp. 278-288 https://doi.org/10.1007/BF02410390
- Joo, J. W. and Han, B. T., 2002, 'Thermo-Mechanical and Flexural Analysis of WB-PBGA Package Using Moiré Interferometry,' Transactions of the KSME(A), Vol.26, No.7, pp. 1302-1308 https://doi.org/10.3795/KSME-A.2002.26.7.1302
- Cho, S.-M., Cho. S.-Y. and Han, B., 2002, 'Observing Real-Time Thermal Deformations in Electronic Packaging,' Experimental Techniques, Vol. 26, No. 3, pp. 25-29 https://doi.org/10.1111/j.1747-1567.2002.tb00065.x
- Pang, J. H., Seetoh, C. W., and Wang, Z. P., 2000, 'CBGA Solder Joint Reliability Evaluation Based on Elastic Plastic Creep Analysis,' ASME J. Electron. Packag., Vol. 122, Issue 3, pp. 255-261 https://doi.org/10.1115/1.1286120
- Jung, W., Lau, J. H. and Pao, Y. H., 1996, 'Nonlinear Analysis of Full-matrix and Permeter Plastic Ball Grid Array Solder Joint,' Proc. 1996 ASME Intrnl Mech. Eng. Congress & Exhi., Atlanta, Nov., 96-WA/EEP-17, pp. 1-19
- Anand, L., 1982, 'Constitutive Equations for the Rate-Dependent Deformation of Metals at Elevated Temperatures,' ASME J. Engineering Material Technology, Vol. 104, pp. 12-17 https://doi.org/10.1115/1.3225028
- Darveaux, R., 1997, 'Solder joint fatigue life model,' Proceedings of 1997 TMS Annual Meeting, pp. 213-218
- Ye, H., Lin, M. and Basaran, C., 2002, 'Failure Modes and FEM Analysis of Power Electronic Packaging,' Finite Elements in Analysis and Design, Vol. 38, Issue.7, pp. 601-612 https://doi.org/10.1016/S0168-874X(01)00094-4
- Wang, G. Z., Cheng, Z. N., Becker, K., and Wilde, J., 2001, 'Applying Anand Model to Represent the Viscoplastic Deformation Behavior of Solder Alloys,' J. Electronic Packaging, Trans. ASME, Vol. 123, No. 3, pp. 247-253 https://doi.org/10.1115/1.1371781
피인용 문헌
- A study on the mechanical properties and deformation behavior of injection molded PMMA-TSP laminated composite vol.24, pp.1, 2012, https://doi.org/10.1007/s13367-012-0003-4
- Characterization for Viscoelasticity of Glass Fiber Reinforced Epoxy Composite and Application to Thermal Warpage Analysis in Printed Circuit Board vol.34, pp.2, 2010, https://doi.org/10.3795/KSME-A.2010.34.2.245